opendev
/
system-config
Code Issues Proposed changes
system-config/doc/source/third_party.rst

475 lines
21 KiB
ReStructuredText
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

.. _third-party-testing:
Third Party Testing
===================
Overview
--------
Gerrit has an event stream which can be subscribed to. Using this event stream,
it is possible to test commits against testing systems beyond those supplied by
OpenStack's Jenkins setup. It is also possible for these systems to feed
information back into Gerrit and they can also leave non-gating votes on Gerrit
review requests.
There are several examples of systems that read the Gerrit event stream
and run their own tests on the commits
`on this page <https://wiki.openstack.org/wiki/ThirdPartySystems>`_.
For each patch set the third party system tests, the system adds a comment
in Gerrit with a summary of the test result and links to the test artifacts.
Requirements
------------
* Before posting a comment to any patch, a third party testing system must
contact the project they wish to test and get approval to post comments
on their patches. This can be done by attending the project's `meeting
<https://wiki.openstack.org/wiki/Meetings>`_.
* Until a third party testing system operates in a stable fashion, third
party tests can comment on patches but not vote on them.
* A system can also be set up to only do '+1' reviews and leave all the
'-1's to be manually confirmed.
* A third-party system may only leave one comment per patch set
(unless it is retriggered).
* The maintainers are responsible for re-triggering tests when their third
party testing system breaks.
* Support recheck to request re-running a test.
* Support the following syntaxes: ``recheck``.
* Recheck means recheck everything. A single recheck comment should
re-trigger all testing systems.
* Publish contact information for the maintainers.
* All accounts must have a wikipage entry. Follow the instructions on
the `ThirdPartySystems wiki page
<https://wiki.openstack.org/wiki/ThirdPartySystems>`_ to add your
system. When complete, there should be a page dedicated to your
system with a URL like:
``https://wiki.openstack.org/wiki/ThirdPartySystems/Example``.
* All comments from your CI system must contain a link to the wiki
page for your CI system.
* Maintainers are encouraged to be in IRC regularly to make it
faster to contact them.
* Include a public link to all test artifacts to make debugging failed tests
easier (using a dns name over a hardcoded ip is recommended).
This should include:
* Environment details
* This must include a utc timestamp of the test run
* Test configuration
* Skipped tests
* logs should include a trace of the commands used
* OpenStack logs
* Tempest logs (including ``testr_results.html.gz``)
* logs must be browsable; logs requiring download, installation or login
to access are not acceptable
.. note:: All test artifacts must be retained for one month.
Reading the Event Stream
------------------------
It is possible to use ssh to connect to ``review.openstack.org`` on port 29418
with your ssh key if you have a normal reviewer account in Gerrit.
This will give you a real-time JSON stream of events happening inside Gerrit.
For example:
.. code-block:: bash
$ ssh -p 29418 USERNAME@review.openstack.org gerrit stream-events
Will give a stream with an output like this (line breaks and
indentation added in this document for readability, the real JSON will
be all one line per event):
.. code-block:: javascript
{"type":"comment-added","change":
{"project":"openstack/keystone","branch":"stable/essex","topic":"bug/969088","id":"I18ae38af62b4c2b2423e20e436611fc30f844ae1","number":"7385","subject":"Make import_nova_auth only create roles which don\u0027t already exist","owner":
{"name":"Chuck Short","email":"chuck.short@canonical.com","username":"zulcss"},"url":"https://review.openstack.org/7385"},
"patchSet":
{"number":"1","revision":"aff45d69a73033241531f5e3542a8d1782ddd859","ref":"refs/changes/85/7385/1","uploader":
{"name":"Chuck Short","email":"chuck.short@canonical.com","username":"zulcss"},
"createdOn":1337002189},
"author":
{"name":"Mark McLoughlin","email":"markmc@redhat.com","username":"markmc"},
"approvals":
[{"type":"CRVW","description":"Code Review","value":"2"},{"type":"APRV","description":"Approved","value":"0"}],
"comment":"Hmm, I actually thought this was in Essex already.\n\nIt\u0027s a pretty annoying little issue for folks migrating for nova auth. Fix is small and pretty safe. Good choice for backporting"}
For most purposes you will want to trigger on ``patchset-created`` for when a
new patchset has been uploaded.
Further documentation on how to use the events stream can be found in `Gerrit's stream event documentation page <https://review.openstack.org/Documentation/cmd-stream-events.html>`_.
Posting Result To Gerrit
------------------------
External testing systems can give non-gating votes to Gerrit by means
of a -1/+1 verify vote. OpenStack Jenkins has extra permissions to
give a +2/-2 verify vote which is gating. Comments should also be
provided to explain what kind of test failed. We do also ask that the
comments contain public links to the failure so that the developer can
see what caused the failure.
An example of how to post this is as follows:
.. code-block:: bash
$ ssh -p 29418 USERNAME@review.openstack.org gerrit review -m '"Test failed on MegaTestSystem <http://megatestsystem.org/tests/1234>"' --verified=-1 c0ff33
In this example ``c0ff33`` is the commit ID for the review. You can
set the verified to either `-1` or `+1` depending on whether or not it
passed the tests.
Further documentation on the `review` command in Gerrit can be found in the `Gerrit review documentation page <https://review.openstack.org/Documentation/cmd-review.html>`_.
We do suggest cautious testing of these systems and have a development Gerrit
setup to test on if required. In SmokeStack's case all failures are manually
reviewed before getting pushed to OpenStack, while this may not scale it is
advisable during the initial testing of the setup.
There are several triggers that gerrit will match to alter the
formatting of comments. The raw regular expressions can be seen in
`gerrit.pp <https://git.openstack.org/cgit/openstack-infra/system-config/tree/modules/openstack_project/manifests/gerrit.pp>`_.
For example, to have your test results formatted in the same manner as
the upstream Jenkins results, use a template for each result matching::
* test-name-no-spaces http://link.to/result : [SUCCESS|FAILURE] some comment about the test
.. _request-account-label:
Creating a Service Account
--------------------------
In order to post comments as a Third Party CI System and eventually verify
your build status on Gerrit patches, you will need a dedicated Gerrit
CI account. You will need to create this account in our OpenID provider
`Launchpad <https://launchpad.net>`_. You may already have an existing
personal account in Launchpad, but you should create a new and entirely
separate account for this purpose. This new CI service account needs to use
a different email address than any existing accounts you have, because
Gerrit assumes email addresses are unique across all accounts.
Once you have created this account with the OpenID provider you can log
into Gerrit with that new account as you would with your normal user
account. Once logged in you will need to do several things:
1. Set an SSH username at https://review.openstack.org/#/settings/ if
it isn't already set. This is the username your CI system will use to
SSH to Gerrit in order to read the event stream.
2. Set the account's fullname at https://review.openstack.org/#/settings/contact
This name should follow a few rules in order to make it clear in Gerrit
comments what this CI system exists to test. The name should have three
pieces ``Organization`` ``Product/technology`` ``CI designator``. The
organization value should be your company name or other organization
affiliation. Product/technology should describe the product or technology
you are testing in conjunction with OpenStack. This should be the name of
a component which cannot be tested in the official OpenStack
infrastructure (requires particular physical hardware, proprietary
software, some hypervisor feature not available in public clouds,
et cetera). Note this should not be the name of an OpenStack project but
rather the thing you are testing with OpenStack projects. And finally
the CI designator is used to denote this is a CI system so that automatic
Gerrit comment parsers can filter these comments out. This value should
be ``CI`` for most CI systems but can be ``Bot`` if you are not
performing continuous integration. An example of a proper name would be
something like ``IBM DB2 CI``.
3. Add the SSH public key you will be using to the Gerrit account at
https://review.openstack.org/#/settings/ssh-keys You can generate an
ssh key using ``ssh-keygen``. You want to give Gerrit the contents of
the generated id_rsa.pub file.
Note you should also subscribe to the `third-party-announce
<http://lists.openstack.org/cgi-bin/mailman/listinfo/third-party-announce>`_
list to keep on top of announcements there which can include account
disablement notices.
In addition, if you use the openstack-infra CI tooling (such as zuul, or
nodepool), you should subscribe to the
`OpenStack-Infra <http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-infra>`_
list to keep on top of announcements there.
It would also be a good idea to contact the `Third Party Coordinators
<https://review.openstack.org/#/admin/groups/440>`_ asking to add your account
to the `Third Party CI mail filter list
<https://review.openstack.org/#/admin/groups/270>`_. This is necessary to keep
Gerrit from sending email messages every time an account comments on a patch.
Once you have done this you will have everything you need to comment on
Gerrit changes from our CI system but you will not be able to vote +/-1
Verified on changes. To get voting rights you will need to get the release
group of the project you are testing to add you to their project specific
<project>-ci group. Please contact the project in question when you are
ready to start voting and they can add you to this group.
The Jenkins Gerrit Trigger Plugin Way
-------------------------------------
There is a Gerrit Trigger plugin for Jenkins which automates all of the
processes described in this document. So if your testing system is Jenkins
based you can use it to simplify things. You will still need an account to do
this as described in the :ref:`request-account-label` section above.
The Gerrit Trigger plugin for Jenkins can be found on `the Jenkins
repository`_. You can install it using the Advanced tab in the
Jenkins Plugin Manager.
.. _the Jenkins repository: http://repo.jenkins-ci.org/repo/com/sonyericsson/hudson/plugins/gerrit/gerrit-trigger/
Once installed Jenkins will have a new `Gerrit Trigger` option in the `Manage
Jenkins` menu. This should be given the following options::
Hostname: review.openstack.org
Frontend URL: https://review.openstack.org/
SSH Port: 29418
Username: (the Gerrit user)
SSH Key File: (path to the user SSH key)
Verify
------
Started: 0
Successful: 1
Failed: -1
Unstable: 0
Code Review
-----------
Started: 0
Successful: 0
Failed: 0
Unstable: 0
(under Advanced Button):
Stated: (blank)
Successful: gerrit approve <CHANGE>,<PATCHSET> --message 'Build Successful <BUILDS_STATS>' --verified <VERIFIED> --code-review <CODE_REVIEW>
Failed: gerrit approve <CHANGE>,<PATCHSET> --message 'Build Failed <BUILDS_STATS>' --verified <VERIFIED> --code-review <CODE_REVIEW>
Unstable: gerrit approve <CHANGE>,<PATCHSET> --message 'Build Unstable <BUILDS_STATS>' --verified <VERIFIED> --code-review <CODE_REVIEW>
Note that it is useful to include something in the messages about what testing
system is supplying these messages.
When creating jobs in Jenkins you will have the option to add triggers. You
should configure as follows::
Trigger on Patchset Uploaded: ticked
(the rest unticked)
Type: Plain
Pattern: openstack/project-name (where project-name is the name of the project)
Branches:
Type: Path
Pattern: **
To format the result's message in a way that works with the current OpenStack
Gerrit GUI parser, configure the ``URL to post`` parameter (under the
``Gerrit Reporting Values`` section) for each job. The correct value for this
paramater is:
\* $JOB_NAME $BUILD_URL
The two ``$ENV_VAR`` will be replaced dynamically when the ``<BUILDS_STATS>``
parameter will be evaluated.
This job will now automatically trigger when a new patchset is
uploaded and will report the results to Gerrit automatically.
The Zuul Gerrit Trigger Way
---------------------------
`Zuul <http://docs.openstack.org/infra/system-config/zuul.html>`_ is a tool that determines what jobs are run when.
Zuul listens to the Gerrit event stream, and first tries to match each event to one or more pipelines.
Zuul’s pipelines are configured in a single file called layout.yaml.
Here’s a snippet from that file that constructs the ``check`` pipeline taken from this
`Zuul sample layout.yaml file <https://git.openstack.org/cgit/openstack-infra/zuul/tree/etc/layout.yaml-sample>`_
.. code-block:: yaml
pipelines:
- name: check
manager: IndependentPipelineManager
trigger:
gerrit:
- event: patchset-created
success:
gerrit:
verified: 1
failure:
gerrit:
verified: -1
merge-failure:
smtp:
to: third_party_ci@example.com
from: zuul@example.com
subject: Upstream change {change} has a merge failure
This pipeline is configured to trigger on any Gerrit event that represents a new
patch set created. The matching event will invoke the configured Jenkins job(s)
(discussed next). If all the Jenkins jobs are successful, Zuul will add a comment
to Gerrit with a ``verified +1`` vote, and if any one fails, with a ``verified -1``.
In case of merge failure Third Party CI should not comment, but check merger-debug.log
and recheck the patch manually if needed.
Email will be sent to notify the owner about the issue.
The sample includes other possible configurations, or you can configure your own by
following the `Zuul layout documentation <http://docs.openstack.org/infra/zuul/zuul.html#layout-yaml>`_
After a Gerrit event matches a pipeline, Zuul will look at the project identified
in that Gerrit event and invoke the Jenkins jobs specified in the ``projects`` section
(for the matching pipeline) using the `Jenkins Gearman Plugin
<https://wiki.jenkins-ci.org/display/JENKINS/Gearman+Plugin>`_.
For example:
.. code-block:: yaml
projects:
- name: openstack-dev/ci-sandbox
check:
- my-sandbox-check
test:
- my-sandbox-test
In this case, any Gerrit event generated from the ``openstack-dev/ci-sandbox`` project, that matched
the ``check`` pipeline would run the ``my-sandbox-check`` job in Jenkins. If the
Gerrit event also matched the ``test`` pipeline, Zuul would also invoke the ``my-sandbox-test``
Jenkins job.
The `layout.yaml <https://git.openstack.org/cgit/openstack-infra/project-config/tree/zuul/layout.yaml>`_
used by OpenStack is a good reference for real world pipeline definitions,
and project-pipeline-job definitions.
The following documentation explains how to setup a 3rd party CI system using this approach.
`OpenStack Third-Party CI <http://docs.openstack.org/infra/openstackci/>`_
Managing Jenkins Jobs
---------------------
When code is pushed to Gerrit, a series of jobs are triggered that run a series
of tests against the proposed code. Jenkins
is the server that executes and
manages these jobs. It is a Java application with an extensible architecture
that supports plugins that add functionality to the base server.
Each job in Jenkins is configured separately. Behind the scenes, Jenkins stores
this configuration information in an XML file in its data directory.
You may manually edit a Jenkins job as an administrator in Jenkins. However,
in a testing platform as large as the upstream OpenStack CI system,
doing so manually would be virtually impossible and fraught with errors.
Luckily, there is a helper tool called `Jenkins Job Builder (JJB)
<http://docs.openstack.org/infra/jenkins-job-builder/>`_ that
constructs and manages these XML configuration files after reading a
set of YAML files and job templating rules. These references provide more details:
* `A basic overview of using JJB to define projects, templates, and jobs in yaml
format is available here. <http://docs.openstack.org/infra/system-config/jjb.html>`_
* `The official documentation to define Jenkins jobs using JJB is here.
<http://docs.openstack.org/infra/jenkins-job-builder/definition.html>`_
* `The JJB description of all jobs used by OpenStack are defined in this folder.
<https://git.openstack.org/cgit/openstack-infra/project-config/tree/jenkins/jobs>`_
(The projects.yaml file is a good starting point)
Testing your CI setup
---------------------
You can use the ``openstack-dev/ci-sandbox`` project to test your external CI
infrastructure with OpenStack's Gerrit. By using the sandbox project you
can test your CI system without affecting regular OpenStack reviews.
Once you confirm your CI system works as you expect, change your
configuration of the gerrit trigger plugin or zuul to subscribe to gerrit
events from your target project.
Permissions on your Third Party System
--------------------------------------
When you create your CI account it will have no special permissions.
This means it can comment on changes but generally not vote +/-1
Verified on any changes. The exception to this is on the
``openstack-dev/ci-sandbox`` project. Any account is able to vote +/-1
Verified on that account and it provides a way to test your CI's voting
abilities before you vote on other projects.
.. _openstack-dev/ci-sandbox: https://git.openstack.org/cgit/openstack-dev/ci-sandbox/
The OpenStack Infrastructure team disables mis-behaving third-party ci
accounts at its discretion. This documentation endeavours to outline specific
circumstances that may lead to an account being disabled. There have been
times when third-party ci systems behave in ways we didn't envision
and therefore were unable to document prior to the event. If your
third-party ci system has been disabled, check the archives of the
`third-party-announce
<http://lists.openstack.org/cgi-bin/mailman/listinfo/third-party-announce>`_
mailing list to which you hopefully are subscribed. The email that notifies
this list that your account has been disabled will include instructions for
getting your system re-enabled. You are also welcome to join us in the
#openstack-infra irc channel on freenode to discuss your situation.
In order to get your Third Pary CI account to have voting permissions on
repos in gerrit in addition to ``openstack-dev/ci-sandbox`` you have a greater
chance of success if you follow these steps:
* Set up your system and test it according to "Testing your CI setup" outlined
above (this will create a history of activity associated with your account
which will be evaluated when you apply for voting permissions).
* Post comments, that adhere to the "Requirements" listed above, that
demonstrate the format for your system communication to the repos
you want your system to test.
* Once your Third Party Account has a history on gerrit so that others
can evaluate your format for comments, and the stability of your
voting pattern (in the sandbox repo):
* send an email to the openstack-dev mailing list nominating your
system for voting permissions
* openstack-dev@lists.openstack.org
* use tags [Infra][Nova] for the Nova program, please replace
[Nova] with [Program], where [Program] is the name of the
program your CI account will test
* present your account history
* address any questions and concerns with your system
* If the members of the program you want voting permissions from agree
your system should be able to vote, the release group for that program
or project can add you to the <project>-ci group specific to that
program/project.
FAQ (Frequently Asked Questions)
--------------------------------
* Q: How do you serve the content of compressed logs so they are rendered within
the browser, rather than presenting a download prompt to the user?
A: Add the following lines to your web server conf file::
RewriteEngine On
RewriteCond %{HTTP:Accept-Encoding} gzip
RewriteCond %{LA-U:REQUEST_FILENAME}.gz -f
RewriteRule ^(.+)$ $1.gz [L]
<FilesMatch ".*\.gz$">
ForceType text/html
AddDefaultCharset UTF-8
AddEncoding x-gzip gz
</FilesMatch>
View Git Blame Copy Permalink