cinder/doc/source/configuration/block-storage/drivers/inspur-instorage-driver.rst

Inspur InStorage family volume driver

Inspur InStorage family volume driver provides OpenStack Compute instances with access to Inspur Instorage family storage system.

Inspur InStorage storage system can be used with FC or iSCSI connection.

This documentation explains how to configure and connect the block storage nodes to Inspur InStorage family storage system.

Supported operations

• Create, list, delete, attach (map), and detach (unmap) volumes.
• Create, list and delete volume snapshots.
• Create a volume from a snapshot.
• Copy an image to a volume.
• Copy a volume to an image.
• Clone a volume.
• Extend a volume.
• Retype a volume.
• Manage and unmanage a volume.
• Create, list, and delete consistency group.
• Create, list, and delete consistency group snapshot.
• Modify consistency group (add or remove volumes).
• Create consistency group from source.
• Failover and Failback support.

Configure Inspur InStorage iSCSI/FC backend

This section details the steps required to configure the Inspur InStorage Cinder Driver for single FC or iSCSI backend.

1. In the cinder.conf configuration file under the [DEFAULT] section, set the enabled_backends parameter with the iSCSI or FC back-end group

   • For Fibre Channel:

     [DEFAULT]
     enabled_backends = instorage-fc-1

   • For iSCSI:

     [DEFAULT]
     enabled_backends = instorage-iscsi-1

2. Add a back-end group section for back-end group specified in the enabled_backends parameter

3. In the newly created back-end group section, set the following configuration options:

   • For Fibre Channel:

     [instorage-fc-1]
     # Management IP of Inspur InStorage storage array
     san_ip = 10.0.0.10
     # Management Port of Inspur InStorage storage array, by default set to 22
     san_ssh_port = 22
     # Management username of Inspur InStorage storage array
     san_login = username
     # Management password of Inspur InStorage storage array
     san_password = password
     # Private key for Inspur InStorage storage array
     san_private_key = path/to/the/private/key
     # The Pool used to allocated volumes
     instorage_mcs_volpool_name = Pool0
     # The driver path
     volume_driver = cinder.volume.drivers.inspur.instorage.instorage_fc.InStorageMCSFCDriver
     # Backend name
     volume_backend_name = instorage_fc

   • For iSCSI:

     [instorage-iscsi-1]
     # Management IP of Inspur InStorage storage array
     san_ip = 10.0.0.10
     # Management Port of Inspur InStorage storage array, by default set to 22
     san_ssh_port = 22
     # Management username of Inspur InStorage storage array
     san_login = username
     # Management password of Inspur InStorage storage array
     san_password = password
     # Private key for Inspur InStorage storage array
     san_private_key = path/to/the/private/key
     # The Pool used to allocated volumes
     instorage_mcs_volpool_name = Pool0
     # The driver path
     volume_driver = cinder.volume.drivers.inspur.instorage.instorage_iscsi.InStorageMCSISCSIDriver
     # Backend name
     volume_backend_name = instorage_iscsi

   Note

   When both san_password and san_private_key are provide, the driver will use private key prefer to password.

4. Save the changes to the /etc/cinder/cinder.conf file and restart the cinder-volume service.