openstack/cinder
Code Issues Proposed changes
cinder/doc/source/configuration/block-storage/drivers/toyou-netstor-tyds-driver.rst
cccqqqlll 6fcb495c8b Add Cinder driver for TOYOU NetStor TYDS 
* Supported Protocol
 - iSCSI

* Supported Feature
 - Create Volume
 - Delete Volume
 - Attach Volume
 - Detach Volume
 - Extend Volume
 - Create Snapshot
 - Delete Snapshot
 - Create Volume from Snapshot
 - Create Volume from Volume (clone)
 - Create lmage from Volume
 - Volume Migration (host assisted)

ThirdPartySystems: TOYOU TYDS CI
Implements: blueprint add-toyou-netstor-tyds-driver
Change-Id: I0a2b6e81c0440593a97c3aff2554cfdb96af77a5
2023-07-14 14:34:52 +08:00

2.1 KiB
Raw Blame History

TOYOU NetStor TYDS Cinder driver

TOYOU NetStor TYDS series volume driver provides OpenStack Compute instances with access to TOYOU NetStor TYDS series storage systems.

TOYOU NetStor TYDS storage can be used with iSCSI connection.

This documentation explains how to configure and connect the block storage nodes to TOYOU NetStor TYDS series storage.

Driver options

The following table contains the configuration options supported by the TOYOU NetStor TYDS iSCSI driver.

cinder.volume.drivers.toyou.tyds.tyds

Supported operations

  • Create Volume.
  • Delete Volume.
  • Attach Volume.
  • Detach Volume.
  • Extend Volume
  • Create Snapshot.
  • Delete Snapshot.
  • Create Volume from Snapshot.
  • Create Volume from Volume (clone).
  • Create lmage from Volume.
  • Volume Migration (host assisted).

Configure TOYOU NetStor TOYOU TYDS iSCSI backend

This section details the steps required to configure the TOYOU NetStor TYDS storage cinder driver.

  1. In the cinder.conf configuration file under the [DEFAULT] section, set the enabled_backends parameter with the iSCSI back-end group.

    [DEFAULT]
enabled_backends = toyou-tyds-iscsi-1

  2. Add a backend group section for the backend group specified in the enabled_backends parameter.

  3. In the newly created backend group section, set the following configuration options:

    [toyou-tyds-iscsi-1]
# The TOYOU NetStor TYDS driver path
volume_driver = cinder.volume.drivers.toyou.tyds.tyds.TYDSDriver
# Management http ip of TOYOU NetStor TYDS storage
san_ip = 10.0.0.10
# Management http username of TOYOU NetStor TYDS storage
san_login = superuser
# Management http password of TOYOU NetStor TYDS storage
san_password = Toyou@123
# The Pool used to allocated volumes
tyds_pools = pool01
# Backend name
volume_backend_name = toyou-tyds-iscsi-1