cinder/doc/source/drivers-all-about.rst
Simon Dodsley 63bd2d89f3 Add 3rd Party CI requirements list
Change-Id: Ie6ed5b72a419948bd617f04cc87a57094203416e
2023-02-17 12:41:14 -05:00

210 lines
8.7 KiB
ReStructuredText

========================
All About Cinder Drivers
========================
.. toctree::
:hidden:
reference/support-matrix
drivers
General Considerations
~~~~~~~~~~~~~~~~~~~~~~
Cinder allows you to integrate various storage solutions into your
OpenStack cloud. It does this by providing a stable interface for
hardware providers to write *drivers* that allow you to take advantage
of the various features that their solutions offer.
"Supported" drivers
-------------------
In order to make it easier for you to assess the stability and quality
of a particular vendor's driver, The Cinder team has introduced the concept
of a **supported** driver. These are drivers that:
* have an identifiable *driver maintainer*
* are included in the Cinder source code repository
* use the upstream Cinder bug tracking mechanism
* support the Cinder :ref:`required_driver_functions`
* maintain a third-party Continuous Integration system that runs the
OpenStack Tempest test suite against their storage devices
* this must be done for every Cinder commit, and the results must be
reported to the OpenStack Gerrit code review interface
* for details, see `Driver Testing <https://wiki.openstack.org/wiki/Cinder/tested-3rdParty-drivers>`_
In summary, there are two important aspects to a driver being considered
as **supported**:
* the code meets the Cinder driver specifications (so you know it
should integrate properly with Cinder)
* the driver code is continually tested against changes to Cinder (so
you know that the code actually does integrate properly with Cinder)
The second point is particularly important because changes to Cinder
can impact the drivers in two ways:
* A Cinder change may introduce a bug that only affects a particular
driver or drivers (this could be because many drivers implement
functionality well beyond the Required Driver Functions). With a
properly running and reporting third-party CI system, such a bug can
be detected at the code review stage.
* A Cinder change may exercise a new code path that exposes a driver
bug that had previously gone undetected. A properly running third-party
CI system will detect this and alert the driver maintainer that there
is a problem.
New Driver CI Requirements
--------------------------
When adding a new driver, the following requirements are made of the driver
and its associated 3rd Party CI system:
* CI_WIKI_NAME correct in driver properties
* CI wiki page exists under https://wiki.openstack.org/wiki/ThirdPartySystems
* Email ping to contact in wiki page receives a pong
* Recheck trigger functioning correctly
* CI is responding on the new driver patch
* CI is responding on other cinder patches
* CI is responding on os-brick patches
* CI runs all cinder-tempest-plugin tests
* CI result is accessible
Failure of any one of these requirements will preclude a new driver from being
accepted into the Cinder project.
Driver Compliance
-----------------
The current policy for CI compliance is:
* CIs must report on every patch, whether the code change is in their own
driver code or not
* The CI comments must be properly formatted to show up in the CI summary in
Gerrit
Non-compliant drivers will be tagged as unsupported if:
* No CI success reporting occurs within a two week span
* The CI is found to not be testing the expected driver (CI runs using the
default LVM driver, etc.)
* Other issues are found but failed to be addressed in a timely manner
CI results are reviewed on a regular basis and if found non-compliant, a
driver patch is submitted flagging it as 'unsupported'. This can occur
at any time during the development cycle. A driver can be returned to
'supported' status as soon as the CI problem is corrected.
We do a final compliance check around the third milestone of each release.
If a driver is marked as 'unsupported', vendors have until the time of
the first Release Candidate tag (two weeks after the third milestone)
to become compliant, in which case the patch flagging the driver as
'unsupported' can be reverted. Otherwise, the driver will be considered
'unsupported' in the release.
The CI results are currently posted here:
http://cinderstats.ivehearditbothways.com/cireport.txt
"Unsupported" drivers
---------------------
A driver is marked as 'unsupported' when it is out of compliance.
Such a driver will log a warning message to be logged in the cinder-volume
log stating that it is unsupported and deprecated for removal.
In order to use an unsupported driver, an operator must set the configuration
option ``enable_unsupported_driver=True`` in the driver's configuration
section of ``cinder.conf`` or the Cinder service will fail to load.
If the issue is not corrected before the next release, the driver will be
eligible for removal from the Cinder code repository per the standard
OpenStack deprecation policy.
If the issue *is* corrected before the next release and the team maintaining
the driver in question submits a patch marking the driver as 'supported',
that patch is eligible (at the discretion of the cinder stable maintenance
team) for backport to the *most recent stable branch*.
.. note::
The idea behind backporting 'supported' status is that reinstatement
should happen very early in the next development cycle after the driver has
been marked 'unsupported'. For example, a driver is marked 'unsupported'
in the Victoria release but CI issues are addressed early in the Wallaby
development cycle; the patch marking the driver may then be proposed to
``stable/victoria``. Thus the patch will be included in the first stable
release of Victoria, and operators upgrading from Ussuri to this release
will not have to change their configuration files.
Note the "at the discretion of the cinder stable maintenance team"
qualification. One reason for this is that the third party CI systems
typically run only on changes to the development branch. Thus if a
driver's CI is restored early in the development cycle when there have
not been many code changes yet, the CI passing in the development branch
can be interpreted as a proxy for CI in the most recent stable branch.
Obviously, this interpretation becomes increasingly invalid as the
development cycle progresses. Further, this interpretation does not
extend to older stable branches.
Driver Removal
--------------
**(Added January 2020**)
As stated above, an unsupported driver is eligible for removal during the
development cycle following the release in which it was marked 'unsupported'.
(For example, a driver marked 'unsupported' in the Ussuri release is eligible
for removal during the development cycle leading up to the Victoria release.)
During the Ussuri development cycle, the Cinder team decided that drivers
eligible for removal, at the discretion of the team, may remain in the code
repository *as long as they continue to pass OpenStack CI testing*. When such a
driver blocks the CI check or gate, it will be removed immediately. (This does
not violate the OpenStack deprecation policy because such a driver's
deprecation period began when it was marked as 'unsupported'.)
.. note::
Why the "at the discretion of the team" qualification? Some vendors may
announce that they have no intention of continuing to support a driver.
In that case, the Cinder team reserves the right to remove the driver as
soon as the deprecation period has passed.
Thus, unsupported drivers *may* remain in the code repository for multiple
releases following their declaration as 'unsupported'. Operators should
therefore take into account the length of time a driver has been marked
'unsupported' when deciding to deploy an unsupported driver. This is because
as an unmaintained driver ages, updates and bugfixes to libraries and other
software it depends on may cause the driver to fail unit and functional tests,
making it subject to immediate removal.
The intent of this policy revision is twofold. First, it gives vendors a
longer grace period in which to make the necessary changes to have their
drivers reinstated as 'supported'. Second, keeping these drivers in-tree
longer should make life easier for operators who have deployed storage backends
with drivers that have been marked as 'unsupported'. Operators should keep the
above points in mind, however, when deploying such a driver.
Current Cinder Drivers
~~~~~~~~~~~~~~~~~~~~~~
The Cinder team maintains a page of the current drivers and what exactly
they support in the :ref:`Driver Support Matrix <driver_support_matrix>`.
You may find more details about the current drivers on the
:doc:`Available Drivers <drivers>` page.
Additionally, the configuration reference for each driver provides
even more information. See :doc:`Volume drivers
<configuration/block-storage/volume-drivers>`.