cinder/doc/source/configuration/block-storage/drivers/hpe-xp-driver.rst

HPE XP block storage driver

HPE XP block storage driver provides Fibre Channel and iSCSI support for HPE XP storages.

System requirements

Supported storages:

Storage model	Firmware version
XP8	90-01-41 or later
XP7	80-05-43 or later

Required storage licenses:

• Thin Provisioning
• Fast Snap

Supported operations

• Create, delete, attach, and detach volumes.
• Create, list, and delete volume snapshots.
• Create a volume from a snapshot.
• Create, list, update, and delete consistency groups.
• Create, list, and delete consistency group snapshots.
• Copy a volume to an image.
• Copy an image to a volume.
• Clone a volume.
• Extend a volume.
• Migrate a volume.
• Get volume statistics.
• Efficient non-disruptive volume backup.
• Manage and unmanage a volume.
• Attach a volume to multiple instances at once (multi-attach).
• Revert a volume to a snapshot.

Note

The volume having snapshots cannot be extended in this driver.

Configuration

Set up HPE XP storage

You need to specify settings as described below for storage systems. For details about each setting, see the user's guide of the storage systems.

1. User accounts

   Create a storage device account belonging to the Administrator User Group.

2. THP pool

   Create a THP pool that is used by the driver.

3. Ports

   Enable Port Security for the ports used by the driver.

Set up HPE XP storage volume driver

Set the volume driver to HPE XP block storage driver by setting the volume_driver option in the cinder.conf file as follows:

If you use Fibre Channel:

[hpe_xp]
volume_driver = cinder.volume.drivers.hpe.xp.hpe_xp_fc.HPEXPFCDriver
volume_backend_name = hpexp_fc
san_ip = 1.2.3.4
san_login = hpexpuser
san_password = password
hpexp_storage_id = 123456789012
hpexp_pool = pool0

If you use iSCSI:

[hpe_xp]
volume_driver = cinder.volume.drivers.hpe.xp.hpe_xp_iscsi.HPEXPISCSIDriver
volume_backend_name = hpexp_iscsi
san_ip = 1.2.3.4
san_login = hpexpuser
san_password = password
hpexp_storage_id = 123456789012
hpexp_pool = pool0

This table shows configuration options for HPE XP block storage driver.

cinder.volume.drivers.hpe.xp.hpe_xp_rest

Required options

• san_ip

  IP address of SAN controller

• san_login

  Username for SAN controller

• san_password

  Password for SAN controller

• hpexp_storage_id

  Product number of the storage system.

• hpexp_pool

  Pool number or pool name of the THP pool.