designate/doc/source/install/ubuntu-dev.rst

Development Environment on Ubuntu

Designate is comprised of four main components designate-api, designate-central, designate-mdns, and designate-pool-manager, supported by a few standard open source components. For more information see architecture.

There are many different options for customizing Designate, and two of these options have a major impact on the installation process:

• The storage backend used (SQLite or MySQL)
• The DNS backend used (PowerDNS or BIND9)

This guide will walk you through setting up a typical development environment for Designate, using BIND9 as the DNS backend and MySQL as the storage backend. For a more complete discussion on installation & configuration options, please see architecture and production-architecture.

For this guide you will need access to an Ubuntu Server (14.04).

Development Environment

Installing Designate

double: install; designate

1. Install system package dependencies (Ubuntu)

$ sudo apt-get update
$ sudo apt-get install python-pip python-virtualenv git
$ sudo apt-get build-dep python-lxml

2. Clone the Designate repo from GitHub

$ mkdir openstack
$ cd openstack
$ git clone https://git.openstack.org/openstack/designate.git
$ cd designate

3. Setup a virtualenv

Note

This is an optional step, but will allow Designate's dependencies to be installed in a contained environment that can be easily deleted if you choose to start over or uninstall Designate.

$ virtualenv --no-site-packages .venv
$ . .venv/bin/activate

4. Install Designate and its dependencies

Note

If you run into the error: Installed distribution pbr 1.1.1 conflicts with requirement pbr>=0.6,!=0.7,<1.0, try doing pip install pbr==0.11.0

$ pip install -r requirements.txt -r test-requirements.txt
$ python setup.py develop

5. Change directories to the etc/designate folder.

Note

Everything from here on out should take place in or below your designate/etc folder

$ cd etc/designate

6. Create Designate's config files by copying the sample config files

$ cp -a rootwrap.conf.sample rootwrap.conf

7. Make the directory for Designate’s log files

$ mkdir -p ../../log

8. Make the directory for Designate’s state files

$ mkdir -p ../../state

Configuring Designate

double: configure; designate

Create the designate.conf file

$ editor designate.conf

Copy or mirror the configuration from this sample file here:

../examples/basic-config-sample.conf

Installing RabbitMQ

Install the RabbitMQ package

$ sudo apt-get install rabbitmq-server

Create a user:

$ sudo rabbitmqctl add_user designate designate

Give the user access to the / vhost:

$ sudo rabbitmqctl set_permissions -p "/" designate ".*" ".*" ".*"

Installing MySQL

double: install; mysql

Install the MySQL server package

$ sudo apt-get install mysql-server-5.5

If you do not have MySQL previously installed, you will be prompted to change the root password. By default, the MySQL root password for Designate is "password". You can:

• Change the root password to "password"

• If you want your own password, edit the designate.conf file and change any instance of

  "mysql+pymysql://root:password@127.0.0.1/designate?charset=utf8" to "mysql+pymysql://root:YOUR_PASSWORD@127.0.0.1/designate?charset=utf8"

You can change your MySQL password anytime with the following command:

$ mysqladmin -u root -p password NEW_PASSWORD
Enter password <enter your old password>

Create the Designate tables

$ mysql -u root -p
Enter password: <enter your password here>

mysql> CREATE DATABASE `designate` CHARACTER SET utf8 COLLATE utf8_general_ci;
mysql> CREATE DATABASE `designate_pool_manager` CHARACTER SET utf8 COLLATE utf8_general_ci;
mysql> exit;

Install additional packages

$ sudo apt-get install libmysqlclient-dev
$ pip install pymysql

Installing BIND9

double: install; bind9

Install the DNS server, BIND9

$ sudo apt-get install bind9

Update the BIND9 Configuration

$ sudo editor /etc/bind/named.conf.options

Change the corresponding lines in the config file:

options {
  directory "/var/cache/bind";
  dnssec-validation auto;
  auth-nxdomain no; # conform to RFC1035
  listen-on-v6 { any; };
  allow-new-zones yes;
  request-ixfr no;
  recursion no;
};

Disable AppArmor for BIND9

$ sudo touch /etc/apparmor.d/disable/usr.sbin.named
$ sudo service apparmor reload

Restart BIND9:

$ sudo service bind9 restart

Create and Import pools.yml File

double: install; pools

Create the pools.yaml file

$ editor pools.yaml

Copy or mirror the configuration from this sample file here:

../examples/basic-pools-sample.yaml

Import the pools.yaml file into Designate

$ designate-manage pool update --file pools.yaml

Initialize & Start the Central Service

double: install; central

Sync the Designate database.

$ designate-manage database sync

Start the central service.

$ designate-central

You'll now be seeing the log from the central service.

Initialize & Start the API Service

double: install; api

Open up a new ssh window and log in to your server (or however you’re communicating with your server).

$ cd openstack/designate

:

If Designate was installed into a virtualenv, make sure your virtualenv is sourced

$ source .venv/bin/activate

Start the API Service

$ designate-api

You’ll now be seeing the log from the API service.

Initialize & Start the Pool Manager Service

double: install; pool-manager

Open up a new ssh window and log in to your server (or however you’re communicating with your server).

$ cd openstack/designate

If Designate was installed into a virtualenv, make sure your virtualenv is sourced

$ source .venv/bin/activate

Sync the Pool Manager's cache:

$ designate-manage pool-manager-cache sync

Start the pool manager service:

$ designate-pool-manager

You'll now be seeing the log from the Pool Manager service.

Initialize & Start the MiniDNS Service

double: install; minidns

Open up a new ssh window and log in to your server (or however you’re communicating with your server).

$ cd openstack/designate

If Designate was installed into a virtualenv, make sure your virtualenv is sourced

$ source .venv/bin/activate

Start the minidns service:

$ designate-mdns

You'll now be seeing the log from the MiniDNS service.

Exercising the API

Note

If you have a firewall enabled, make sure to open port 53, as well as Designate's default port (9001).

Using a web browser, curl statement, or a REST client, calls can be made to the Designate API using the following format where "api_version" is either v1 or v2 and "command" is any of the commands listed under the corresponding version at rest

http://IP.Address:9001/api_version/command

You can find the IP Address of your server by running

curl -s checkip.dyndns.org | sed -e 's/.*Current IP Address: //' -e 's/<.*$//'

A couple of notes on the API:

• Before Domains are created, you must create a server (/v1/servers).