Also reformat common configuration variables to have an additional
header level which makes it easy to direct link to specific
configuration vars when directing someone.
Reformat header markup to us a more standard == = - for h1, h2, h3
Change-Id: I10bac5a93529cdfbcde0a05f9ebdbc1799d403cd
Define IP_VERSION with one of the three values 4, 6, or 4+6 in
your localrc to indicate if you intend to run your tenant data network
as either IPv4, IPv6, or dual stack respectively. Default value is 4.
If your IP_VERSION is set to 6 or 4+6, then the following variables
should be defined in your localrc:
- FIXED_RANGE_V6: The IPv6 prefix for your tenant network
- IPV6_PRIVATE_NETWORK_GATEWAY: The gateway IP with the same prefix
- IPV6_RA_MODE (with default as slaac)
- IPV6_ADDRESS_MODE (with default as slaac)
If you're going to use IPV6_RA_MODE/IPV6_ADDRESS_MODE settings other
than the defaults then you should make sure your VM image has dhcpv6
client enabled at bootup, otherwise you'll need to run it manually
after the VM is booted.
It's recommended to run the latest version of dnsmasq 2.68.
If you intend to enable internet access in your VM, make sure
your network node has IPv6 internet access, and the IPv6 prefix for
your tenant network is a GUA and routable.
Implements: blueprint ipv6-support
Change-Id: I848abf18e00e2a869697c5ef6366bc567dde448a
Co-Authored-By: John Davidge <jodavidg@cisco.com>
The motivation for this conversion is to have DevStack's docs be
generated using a more familair workflow for OpenStack projects, using
Sphinx.
Changing from raw HTML to RST will also make it easier to contribute
more documentation, as well as making edits less of a hassle.
The majority of the work was done by using Pandoc to convert from HTML
to RST, with minor edits to the output to remove errors in Sphinx.
Change-Id: I9636017965aeade37b950ddf5bdb0c22ab9004bd
