c2d40ce606
Use https instead of http to ensure the safety without containing our account/password information.Deleted some invalid URLs. Change-Id: Ieec4253dc5c5caae136837533dc1aae9c86bd4e5
7.1 KiB
Traceroute support
https://blueprints.launchpad.net/dragonflow/+spec/traceroute-support
Traceroute is a handy network diagnostic tool. Network administrators use this tool most commonly in their day to day activities. It can provide the following information of network:
- The entire path that a packet travels through
- Names and identity of routers and devices in the path
- Network Latency taken to send and receive data to each devices on the path
Problem Description
The virtual routers in Dragonflow don't support traceroute well. When a detecting packet of traceroute goes through virtual router, you will most likely get an asterisk from traceroute's output. That means traceroute doesn't get the expected response from router. More details will be provided in the following description.
Proposed Change
Supporting traceroute is to support the network functionalities behind it. Traceroute mainly depends on the TTL(Time To Live) field in the Internet Protocol. Traceroute will send IP packets with increasing TTL and expect each router in the network path to reply with an ICMP Time Exceeded message. By using that message, traceroute can know the information of router in the network path.
For each router, that will require it to decrease TTL of IP packets when it routes them. Meanwhile, that will also require each router to discard the original IP packet and reply an ICMP Time Exceeded message, when the TTL is invalid. An invalid TTL means its value is not bigger than zero. The details are defined at RFC1812 [RFC1812].
There are 3 kinds of implementations of traceroute. They are based on UDP, TCP and ICMP respectively. Different implementations send different IP packets to detect the network packets. For UDP implementation, traceroute expects the destination to return an ICMP Destination Unreachable Message. For TCP implementation, traceroute expects the destination to return an ICMP Destination Unreachable Message or a SYN/ACK packet. For ICMP implementation, traceroute expects the destination to return an ICMP echo reply.
Since it is distributed virtual routers in Dragonflow, there is no concrete router ports. If the destination of traceroute is virtual router ports, they should response with ICMP Destination Unreachable Message.
The ICMP error message should contain at least 28 bytes of original datagram's data, according to RFC792 [RFC792]. And traceroute depends on the original datagram's data to match the detecting IP packets. So the virtual routers in Dragonflow should also copy the data to the ICMP messages mentioned above.
The virtual routers in Dragonflow are also NAT(network address translation) devices. The NAT here refers to one-one NAT, which is floating IP in Dragonflow. As mentioned above, the ICMP error message will contain original datagram's data. It is an embedded packet. According to RFC5508 [RFC5508], NAT devices should also revert the IP of embedded packet. Or else, it will be an invalid ICMP packet. Since the header embedded packet will change, its checksum will be re-calculated when encoded.
A valid ICMP Time Exceeded message should looks like:
02:58:24.390013 IP (tos 0xc0, ttl 63, id 55039, offset 0, flags [none], proto ICMP (1), length 74)
172.24.4.1 > 20.0.0.12: ICMP time exceeded in-transit, length 54
IP (tos 0x0, ttl 1, id 6596, offset 0, flags [DF], proto UDP (17), length 46)
20.0.0.12.51016 > 192.168.31.94.33438: UDP, length 18Dragonflow controller impact
The virtual switch should be configured to packet-in invalid TTL packets. So that the Dragonflow controller applications can handle the TTL invalid packets accordingly. This feature is available in OpenFlow 1.3 [OF13]. It is also available in OpenFlow 1.2 with different configuration. To make things simple, this spec will not cover OpenFlow 1.2.
Dragonflow Applications Impact
Because some packets will be sent to Dragonflow controller, the DDoS attack should be taken into account. When the rate of packet-in is high, proper OpenFlow rules will be added to drop the packet.
L3 proactive application
Add packet-in handler to handle TTL invalid packets. The packet-in handler will also reply UDP/TCP packets with ICMP Destination Unreachable Message.
L3 application
The same as L3 proactive application
DNAT application
Add packet-in handlers to handle TTL invalid packets. This includes handler for ingress NAT packets and handler for egress NAT packets. Both handlers will also do NAT to the IP of embedded packets of ICMP error message.
Installed flows
Ingress NAT Table
priority=high,icmp,nw_dst=fip,icmp_type=11 actions=mod_dl_src:gw_mac,mod_dl_dst:vm_mac,dec_ttl,mod_nw_dst:vm_ip,(packet-in controller)
priority=high,icmp,nw_dst=fip,icmp_type=3 actions=mod_dl_src:gw_mac,mod_dl_dst:vm_mac,dec_ttl,mod_nw_dst:vm_ip,(packet-in controller)These two flows matches ICMP Time Exceeded message and ICMP Destination Unreachable Message. Do NAT to the ICMP packets and then packet-in the packets to controller, where the IP of embedded packets will be reverted.
Egress NAT Table
priority=high,icmp,metadata=network_uid,nw_src=vm_ip,icmp_type=11 actions=mod_dl_src:fip_mac,mod_dl_dst:br-ex_mac,mod_nw_src:fip,(packet-in controller)
priority=high,icmp,metadata=network_uid,nw_src=vm_ip,icmp_type=3 actions=mod_dl_src:fip_mac,mod_dl_dst:br-ex_mac,mod_nw_src:fip,(packet-in controller)These two flows matches ICMP Time Exceeded message and ICMP Destination Unreachable Message. Do NAT to the ICMP packets and then packet-in the packets to controller, where the IP of embedded packets will be reverted.
L3 lookup Table
priority=high,tcp,metadata=network_uid,nw_dst=router_port_ip actions=(packet-in controller)
priority=high,udp,metadata=network_uid,nw_dst=router_port_ip actions=(packet-in controller)These two flows matches UDP and TCP packets to router port, and reply with ICMP Destination Unreachable Message.
Implementation
Assignee(s)
- Primary assignee:
Work Items
- Configure virtual switch(i.e. br-int) to packet-in TTL invalid packets.
- Add common function to generate ICMP Time Exceeded message, and apply the function to L3 proactive application, L3 application and DNAT application.
- Add flows to L3 lookup table to packet-in UDP and TCP packets, and reply with ICMP Destination Unreachable Message.
- Add flows to Ingress NAT table and Egress NAT table, and do NAT to embedded packet of ICMP error message.
- Add rate limiter to each packet-in handler.