Fuel 7.0 UI changes

Update the Fuel 7.0 UX workflow and add
the dashboard tab. This commit focuses on the dashboard changes,
and the Nodes tab with sorting, filtering, and adding custom labels.
We are not changing the entire userguide with this commit.
Other commits will follow to change the rest.

Change-Id: I016222109971c42029e434b4917f0f8a18d92cae

pages/user-guide/5000-deploy-environment.rst

@@ -8,37 +8,17 @@
 Deploy Changes
 ==============
 
-When you have made all the configuration changes you want to make,
-click the "Deploy Changes" button
+When you have made all the configuration changes you want to make
+and reviewed them on the Dashboard, click the "Deploy Changes" button
 to deploy the environment you have defined.
 
-When you are satisfied with your configuration,
-click on the "Deploy Changes" button.
-The following screen is displayed
-to summarize the configuration modifications you have made:
-
-.. image:: /_images/user_screen_shots/assign-role-confirm2.png
-   :width: 50%
-
-This is your last chance to change the configuration;
-check it carefully and,
-if this is not the configuration you want to deploy, click "Cancel".
-If this is the configuration you want,
-click "Deploy";
-after this, you cannot modify the configuration without starting over.
+.. image:: /_images/user_screen_shots/deploy-changes-dashboard.png
 
 It can take fifteen minutes to an hour to deploy Mirantis OpenStack,
 depending on the options chosen;
 deployment times out at two hours.
-You can monitor the progress by opening the **Nodes** tab
-or by checking individual node logs in the **Logs** tab.
+You can monitor the progress on the Dashboard, on the "Nodes" tab, or
+on the Fuel UI home page.
 
 .. include:: /pages/user-guide/stop_reset/0200-stop-deploy-ui.rst
 .. include:: /pages/user-guide/stop_reset/0500-reset-environment.rst
-
-Note, that beginning with Fuel 6.1, the Fuel web UI
-displays warnings if you try to press **Deploy** button
-with network verification in progress, failed or
-skipped. See :ref:`Verify networks <verify-networks-ug>` for
-more details and screenshots.
-

pages/user-guide/config-environment/0900-add-nodes.rst

@@ -4,12 +4,31 @@
 Add nodes to the environment
 ----------------------------
 
-The initial screen shows the total number of nodes
-that have been discovered in your environment
-and the number of nodes that are unallocated.
-Click on the "Add nodes" button to add nodes
+The default screen shows the total number of nodes
+that have been discovered in your environment.
+And the ratio of unallocated to total nodes is shown in the top right
+of the page.
+Click on the "Add nodes" button on the Dashboard to add nodes
 to your environment:
 
 .. image:: /_images/user_screen_shots/add-nodes1.png
    :width: 80%
 
+You can review your nodes on the "Nodes" tab. Here you you can
+also manage, sort, filter the list of nodes, as well as look for
+a specific node by its name, MAC, or IP address:
+
+.. image:: /_images/user_screen_shots/manage-nodes.png
+
+To add a custom label to a node, select the node and click the label
+icon:
+
+.. image:: /_images/user_screen_shots/manage-nodes2.png
+
+To remove a label, you will need to select the node, click the label
+icon, remove the tick from the checkbox, and click "Apply":
+
+.. image:: /_images/user_screen_shots/manage-nodes3.png
+
+It is not possible to have two labels with the same name but different
+values. Label names must be unique.

pages/user-guide/config-environment/1000-assign-roles.rst

@@ -28,51 +28,50 @@ and a list of unallocated nodes at the bottom.
 As you make your selections,
 Fuel displays an icon
 (a gold triangle with an exclamation point)
-next to roles that are not allowed.
+next to the roles that are not allowed.
 It also tells you about other environment settings that are required.
 
 .. image:: /_images/user_screen_shots/assign-roles2.png
 
 If you want to modify the roles assigned to a node:
 
-- If you assigned the wrong role to a node
-  (for example, you defined a node as a Compute node but want it
-  to be a Ceph OSD node),
-  select that node and click the "Delete" button.
+- If you assigned the wrong role to a node and deployed the
+  environment (for example, you defined a node as a Compute node
+  but want it to be a Ceph OSD node), select that node and click
+  the "Delete" button:
+
+  .. image:: /_images/user_screen_shots/assign-roles3.png
+
   This moves that node back to the pool of "Unallocated nodes"
-  so you can click on "Add Node" to assign a new role.
-- If you want to add a role to a node
+  so you can click on "Add Node" to assign a new role. This means that
+  you will also have to redeploy the environment for the changes to
+  take effect.
+- If you want to add a role to a node or edit the roles in an
+  environment that has not yet been deployed
   (for example, you defined a node as a Compute node but want it
   to also have a Ceph OSD role),
-  select that node and click the additional roles you want to assign
-  (in this case, click the "Ceph OSD" node
-  and leave the "Compute" role selected);
-  click the "Apply Changes" button.
-
-When you click the "Apply Changes" button,
-Fuel displays the configuration you have chosen:
-
-
-.. image:: /_images/user_screen_shots/assign-role-confirm.png
+  select that node and click "Edit Roles":
 
+  .. image:: /_images/user_screen_shots/assign-roles4.png
 
 To rename the nodes, click on the "Untitled" string
 for each node and then type in the name you want to use.
 The suffix is the last digits of the MAC address for this node;
 you can keep these digits or delete them.
 
-Beginning with Fuel 6.1, you can remove
-a node from inventory if it is dead or
-there is need to delete it from the cluster.
-To do that, you should click **Forget** button
-next to the required node. This works for any offline
-node both deployed and not.
+You can remove an offline node from the inventory by selecting it
+and clicking "Remove". This will remove the node from the pool
+of available nodes completely.
+
+You can also delete any node from the environment by selecting it
+and clicking "Delete". This will delete the node and return it to the
+pool of unallocated nodes.
+
 To remove any node from inventory using the
 Fuel CLI, see :ref:`Remove a node from Fuel DB <remove-inv>`.
 
 .. image:: /_images/user_screen_shots/remove-node-inventory.png
 
-
 For more information, see:
 
 - :ref:`nodes-roles-arch` describes the Controller,

pages/user-guide/config-environment/1200-customize-partitions.rst

@@ -28,12 +28,9 @@ The following partition types may be configured:
 - MongoDB: used for Ceilometer information stored in MongoDB
 - Mysql database: stores Zabbix statistics on Zabbix nodes
 
-To modify the disk allocation,
-click on the bar for a disk.
-This example is for a node that runs
-both a Compute node and a Storage - Cinder role;
-clicking on the center bar gives a display
-similar to the following:
+To modify the disk allocation, click *Configure Disks*:
+
+.. image:: /_images/user_screen_shots/partition-disks0.png
 
 .. image:: /_images/user_screen_shots/partition-disks.png
    :width: 80%

pages/user-guide/create-environment/1000-start-create-env.rst

@@ -22,6 +22,14 @@ The Fuel UI screen appears:
 .. image:: /_images/user_screen_shots/create_new_environ.png
    :width: 80%
 
+The Dashboard tab is your go-to place to review all the necessary
+information about your OpenStack environment:
+
+.. image:: /_images/user_screen_shots/fuel-dashboard01.png
+
+The Dashboard tab is also the place where you can delete or rename your
+environment, discard the changes, start or stop the deployment,
+access documentation, and view possible errors reported by Fuel.
 
 Click on the "New OpenStack environment" icon
 to launch the wizard that creates a new OpenStack environment.
@@ -29,4 +37,3 @@ to launch the wizard that creates a new OpenStack environment.
 If you are deploying a Mirantis OpenStack environment
 that is integrated with VMware vSphere,
 follow the instructions in :ref:`vcenter-deploy`.
-

pages/user-guide/create-environment/1050-change-password.rst

@@ -2,9 +2,19 @@
 
 Change Fuel Password
 --------------------
+It is highly recommended that you change the default password
+to the one that meets your company's security requirements.
+
+Until you do, Fuel will keep reminding you that the password
+has not been changed yet:
+
+.. image:: /_images/user_screen_shots/change_pass_notification.png
+
+You can change the Fuel password from the Fuel UI screen
+Click the user icon at the upper right of the screen:
+
+.. image:: /_images/user_screen_shots/change_pass_ui.png
 
-You can change the Fuel password from the Fuel UI screen;
-click on "Change password" at the upper right of the screen.
 The following screen is displayed:
 
 .. image:: /_images/authx/change_pass_not_vis.png

pages/user-guide/create-environment/1500-name-distro.rst

@@ -14,29 +14,24 @@ and select the Linux distribution from the drop-down list:
 
 ::
 
-    Juno on Ubuntu 14.04.1 (2014.2.2-6.1)(default)
-    Juno on CentOS 6.5 (2014.2.2-6.1)
+    Kilo on Ubuntu 14.04.1 (2015.1.0-7.0) (default)
 
 This is the operating system that will be installed
 on the target nodes in the environment.
-See :ref:`linux-distro-plan` for guidelines
-about choosing the distribution to use.
 
 The number in parentheses
-is the version number for each environment version;
-it is formed by concatenating the Juno Release number
+is the version number for the environment;
+it is formed by concatenating the Kilo Release number
 and the Mirantis OpenStack Release number.
-In this case, the "2014.2" string corresponds to the Juno release version;
-the "6.1" string is the Mirantis OpenStack release number.
+In this case, the "2015.1" string corresponds to the Kilo release version;
+the "7.0" string is the Mirantis OpenStack release number.
 
 Note that the list displayed under the "Releases" tab
 at the top of the Fuel home page
-lists all the releases that Fuel 6.1 can manage
+lists all the releases that Fuel 7.0 can manage
 in your environment.
 If you upgraded Fuel
 from an earlier Mirantis OpenStack release,
-Fuel 6.1 can manage environments that were previously deployed
+Fuel 7.0 can manage environments that were previously deployed
 using those releases.
 It cannot, however, deploy a new environment using those releases.
-
-

pages/user-guide/health-checks/0200-run-tests.rst

@@ -4,7 +4,7 @@ Running Post-Deployment Checks
 Now, let`s take a closer look on what should be done to execute the tests and
 to understand if something is wrong with your OpenStack environment.
 
-.. image::  /_images/001-health-check-tab.jpg
+.. image::  /_images/001-health-check-tab.png
   :align: center
   :width: 100%
 
@@ -34,7 +34,7 @@ this section.
 
 An actual test run looks like this:
 
-.. image::  /_images/002-health-check-results.jpg
+.. image::  /_images/002-health-check-results.png
   :align: center
   :width: 100%
 

pages/user-guide/stop_reset/0200-stop-deploy-ui.rst

@@ -3,8 +3,9 @@
 Stopping Deployment from Web UI
 -------------------------------
 
-Click on the small red button that appears to the right of the progress bar
-after you click "Deploy changes" and deployment itself starts:
+On the Dashboard, click on the small red button that appears to the
+right of the progress bar after you click "Deploy changes" and
+deployment itself starts:
 
 .. image:: /_images/stop_deployment_button.png
   :align: center
@@ -21,26 +22,26 @@ This may lead to one of two possible results:
    the environment may then be redeployed from scratch.
    Two things will happen in UI:
 
-    * All nodes are marked as offline
-      and are eventually return back online after reboot.
-      You can not deploy an environment that includes offline nodes,
-      so the next deployment should not be started
-      until all nodes have been successfully discovered
-      and reported as online in the UI.
-    * All settings will be unlocked on all tabs and for all nodes,
-      so that you can change any setting before starting a new deployment.
+   * All nodes are marked as offline
+     and are eventually return back online after reboot.
+     You can not deploy an environment that includes offline nodes,
+     so the next deployment should not be started
+     until all nodes have been successfully discovered
+     and reported as online in the UI.
+   * All settings will be unlocked on all tabs and for all nodes,
+     so that you can change any setting before starting a new deployment.
 
-    This is quite similar to resetting the environment (:ref:`Reset_Environment`).
+   This is quite similar to resetting the environment (:ref:`Reset_Environment`).
 
 #. Some nodes are already deployed (usually controllers)
    and have reached "ready" status in the UI.
    In this case, the behavior is different:
 
-    * Only nodes which did not reach "ready" status are rebooted
-      back to bootstrap; deployed ones remain intact.
-    * Settings remain locked
-      because they have been already applied to some nodes.
-      You may reset the environment (:ref:`Reset_Environment`)
-      to reboot all nodes, unlock all parameters,
-      and redeploy an environment from scratch to apply them again.
+   * Only nodes which did not reach "ready" status are rebooted
+     back to bootstrap; deployed ones remain intact.
+   * Settings remain locked
+     because they have been already applied to some nodes.
+     You may reset the environment (:ref:`Reset_Environment`)
+     to reboot all nodes, unlock all parameters,
+     and redeploy an environment from scratch to apply them again.
 

pages/user-guide/stop_reset/0500-reset-environment.rst

@@ -16,7 +16,7 @@ The deployment process may be completed in one of three ways
    (see :ref:`Stop_Deployment`)
 
 Any of these three possibilities causes the "Reset" button
-in the "Actions" tab to become unlocked:
+on the Dashboard to become unlocked:
 
 .. image:: /_images/reset_environment_button.png
   :align: center
@@ -26,10 +26,10 @@ Click this button to reset the whole environment
 back to the state it was in
 right before the "Deploy changes" button was first clicked.
 
-    * All nodes will be offline; they will come back online after reboot.
-      You can not deploy an environment that includes offline nodes,
-      so you should start the next deployment
-      after all nodes have been successfully discovered
-      and reported as online in UI.
-    * All settings will be unlocked on all tabs and for all nodes,
-      so you can modify any setting before starting a new deployment.
+* All nodes will be offline; they will come back online after reboot.
+  You can not deploy an environment that includes offline nodes,
+  so you should start the next deployment
+  after all nodes have been successfully discovered
+  and reported as online in UI.
+* All settings will be unlocked on all tabs and for all nodes,
+  so you can modify any setting before starting a new deployment.