openstack/fuel-docs
Code Issues Proposed changes
ce3185e8d3
fuel-docs/userdocs/fuel-install-guide/vsphere/vsphere_configure_network.rst
Svetlana Karslioglu 42ace6e5d9 Move Fuel Installation Guide to fuel-docs 
Move the Fuel Installation Guide to fuel-docs.
Created the userdocs foler.

Change-Id: Ie7273da30c486033b9ccc7cc258719e73a9a8ae9
2016-03-31 01:27:48 -07:00

1.2 KiB
Raw Blame History

Configure networks

To enable inter-node communication, you must configure networks on VMware vCenter.

Configure a network for Fuel Admin (PXE) traffic

You must configure a network for the Fuel Admin (PXE) traffic and enable Promiscuous mode.

To configure a network for the Fuel Admin (PXE) traffic:

  1. Go to the vCenter screen.
  2. Choose Hosts.
  3. Select the host on which you want to run the Fuel Master node.
  4. Click the Networking button.
  5. Click the Add Host Networking icon.

Create a vCenter Port Group network

You must create a Port Group with Promiscuous mode.

To create a vCenter Port Group network:

  1. Choose a Port Group connection type.
  2. Choose a switch.
  3. Name your network and set the VLAN number. This is optional and depends on your underlying network infrastructure.
  4. After the network is created, select the network on the network map; then click the Edit Settings icon.
  5. Click Security.
  6. Verify that the Promiscuous mode is set to Accept.
  7. Click "OK".
  8. Proceed to vsphere_create_vm.