Previous some of these methods were not well documented. Hopefully they
now are.
Change-Id: If73987a2dd234b71a1c2af9b764becc34aee4496
Partial-bug: 1367915
This is a follow-up patch for commit
3af9ab36bfae3a369fdb3d2b6d02ac803c39ee17
The review requested that a LOG.debug() message be added.
Change-Id: I36fbd4269c948812f4bee66d0130150afd0c0279
This patch updates the _install_grub2 function in image.py
so that we use 'mount -t sysfs' instead of bind mounting
the hosts /sys into the chroot.
This resolves issues which can occur with unmounting
the chroot mounts where 'target is busy' errors
may occur when you are debugging things with a serial
console.
Change-Id: I5c9a6546d048cbf54695329d9744fda55127bd30
Closes-bug: #1503385
This fixes a ValueError exception that would occur if
log debug was enabled in IPA.
Change-Id: Id95f291dd77d69e7d4dd4f945c6c151db7a0646b
Closes-bug: #1503354
This adds additional functional tests for the commands API.
It also restructures the current functional test to run in
sequence as a monolithic test to preserve IPA state and test
order between test runs. The time to wait for IPA to start
was increased due to an intermittent race condition that
occurs with the larger test suite.
Partial-Bug: 1492036
Change-Id: Iff9b41fb531d34225d702b9bfd39826e3c7195ad
Bring ironic-python-agent in line with the other ironic projects.
Stop ignoring all E12* errors except E129
Stop ignoring E711
Change-Id: Icb9bc198473d1b5e807c20869eb2af7f4d7ac360
This is a port of downstream inspector ramdisk plugins we found helpful.
* logs - sends journald logs with inspection data.
* extra-hardware - uses hardware-detect utility to collect bigger
hardware inventory and to run benchmarks.
Change-Id: If05402606c45185d618279eef46e68c51209f82b
This patches updates the get_clean_steps() method to make the
erase_devices step abortable. Erasing devices is something that can be
cancelled without damaging the machine.
When a clean step is aborted the provision state of the Ironic node
will go to CLEANFAIL state. The operator can then do what is needed to
fix the problem (i.e network booting issues) and restart the cleaning
later on.
Partial-Bug: #1455825
Change-Id: Ic181ac3712810c6f6925e8b627ee79e77ecf4d83
Put the columns to retrieve from lsblk into a list so that future
modifications to columns will require fewer code changes.
Also add a 'block_type' parameter which defaults to 'disk'. To make the
function more flexible if callers wanted a different block type.
Update and add unit tests
Change-Id: If06460e13a5b56dc8d6efca9ff5b58ac6ba1f357
This fix enables creation of config drive for UEFI only whole disk
images.
It will not work with the hybrid images that support booting in BIOS
and UEFI boot mode.
Change-Id: Ib4dd8c082a50e1dbaf0df91477b062716cb780ff
Closes-Bug: #1486887
Depends-On: I81400305f166d62aa4612aab54602abb8178b64c
This patch corrects the default ironic api port number to 6385 from
6835. The default value of 'ipa-api-url' is not used in production
environment since conductor and bare metal node have its own IP
address, but could be used in development environment.
Therefor this patch fixes this trivial error.
- default=APARAMS.get('ipa-api-url', 'http://127.0.0.1:6835'),
+ default=APARAMS.get('ipa-api-url', 'http://127.0.0.1:6385'),
Change-Id: Idb85e95b354a68111f94e8cddd5c1b6227e676ef
If an image cannot be downloaded for some reason, it is helpful for
operators to have the image path, checksum, and calculated checksums
available easily from the API.
Change-Id: I6a2fb46726245cebd730b5c51d4f25f8465f1658
Currently we only use these disk properties for root device hints.
However, they'll be really useful for inspector, especially for also
implementing root device hints.
Change-Id: I48aa6b6d2d198d16f2f8e387970f7230066cf8a2
1. cleanly separate deprecated and non-deprecated properties
2. add root disk to inspection data, so that we can have a proper
fallback when root device hints are not given.
Change-Id: Ie19b82ff2a914873ff4b2395b02643e086b934b1
A GET to /v1 in the API returns a link to a URL for a repository that is no
longer maintained. This commit changes the link to point to the correct
documentation.
Change-Id: I8779cd1840627ff8759527b7514306293682aaae
Create a SerializableComparable class derived from the Serializable
class.
Added the following functions to the SerializableComparable class:
'__eq__'
'__ne__'
Disable the '__hash__' function in the SerializableComparable class as
some derived classes are mutable.
Use the SerializableComparable class in hardware.py and
extensions/base.py
This should make unit testing users of the class easier when doing a
self.assertEqual() or self.assertNotEqual()
Added some initial unit testing for encoding.py
Change-Id: If0f14b3bfe7f1391f65dd730a16a534afed0da82
If a clean step returns a tuple (like the output of
processutils.execute), WSME raises an error about the type. Casting
the result as a list seems to make it work. This is almost certainly
a bug in WSME, but after digging a bit I couldn't find one.
Change-Id: I91cb7a989ab56c0942469e03937945d4a590ad95
Partial-bug: #1493554
Adds a new module ironic_python_agent.inspector and new entry point
for extensions, which will allow vendor-specific inspection.
Inspection is run on service start up just before the lookup.
Due to this early start, and due to the fact we don't even know
MAC address of nodes on inspection (to say nothing about IP addresses),
exception handling is a bit different from other agent features:
we try hard not to error out until we send at least something to inspector.
Change-Id: I00932463d41819fd0a050782e2c88eddf6fc08c6
Convention for naming test files is test_*
Rename the utils.py to test_utils.py to match convention.
Change-Id: Idfbfa00dc47c6a60a0fb82b81b1bca0a8dfa345a
Adding documentation for methods in these files that were missing
docstrings.
Change-Id: I2ad9f85605720ab2295dec3d0436ff0af07847c2
Partial-bug: 1367915
ordereddict, and a related workaround method, were removed as we no
longer support python 2.6. Collections contains ordereddict on newer
python versions.
Change-Id: I48cc55a5c56fbc1f71442fc858eb4905f0213988
The code that is covered in this exception block
does not actually retry three times, so it seems better
to have the message not reference that it does.
Change-Id: I0cc19aab65aa9ba4d73a8842390b712f7f63925c
Instead of silently failing, raise DeviceNotFound when no root device
hints were provided and all found block devices are smaller than 4GB.
Change-Id: Idd2e2c5905adf847f00ad15a84a817c3715225dd
Closes-Bug: #1490761
Moved tests/extensions to tests/unit/extensions, otherwise they
wouldn't have run. Renamed the files in tests/unit/extensions to be
prefixed with 'test_', to match the rest of the test files. Did a
general clean up of tox.ini so we have standard whitespace.
Change-Id: I5615bfbf2d6ff4a4bc3e66e71c2472b0d1e3a2d7
Hardware managers should load at runtime. This will ensure the agent is
ready to respond to API calls before it begins heartbeating. Also, it
means in case of a syntax or other error in a HardwareManager, the agent
will crash before it heartbeats, which is better than it working until a
hardware manager method is needed.
Change-Id: I9403ce7bedc8d5af20b6d84371367253b26b74c2
Closes-bug: 1490008
oslo_log wasn't getting the correct config values passed in, so adding
'--debug' to the command line wouldn't enable debug logging.
Added docs about --debug and --standalone (the only two flags I've
seen used/supported).
Change-Id: Ie1ba64992444a65a40f2d65933942153b93e70c1
There is no way for two hardware managers to handle erasing two disks
in two different ways. dispatch_to_managers was designed specifically
for this case, and the default behavior will remain the same for the
GenericHardwareManager (erase_block_device will pick up each disk).
Also return the result of the dispatch calls, so they'll be logged by
Ironic and give more cleaning insight.
Change-Id: I19e9dc8539a0729fbb96cae92fe633e24608fc68
This function is useful in any HardwareManager that interacts with
disks. Subclassing GenericHardwareManager is not ideal for any
hardware manager that interacts with only specific devices.
Change-Id: Ib20e68a8916590513c0a825e44407a110cfbb441
After successful inspection we will know node UUID already, so no need
to do a proper lookup. In the future we might get rid of lookup completely
in this case.
Change-Id: Ic00049bf69f9ecc59ac4e389a3e6afe20ba67aba
