openstack/ironic-python-agent
Code Issues Proposed changes
00ad03b709
ironic-python-agent/releasenotes/notes
History
Julia Kreger c77a7df851 Extend retries to 9, 10 seconds apart. 
The download retry interval was previously five seconds which is
not long enough to recover after a hard network connectivity break
where we may be reliant upon network port forwarding hold-down
timers or even routing protocol route propogation to recover
communication.

Previously the time value was 5 seconds, with 3 attempts, meaning
15 seconds total ignoring the error detection timeouts.

Now it is 10 seconds, with 10 attempts, meaning 100 seconds before
the error detection timeouts.

Change-Id: I6d11edc9a3156f2bdc21c3d432ecc7625d652699
2020-06-23 20:27:49 +00:00
..
.placeholder Add reno for release notes management 2015-12-16 16:04:29 -08:00
ability-to-disable-secure-erase-c3223262726d5aff.yaml Provide knob to disable ata secure erase 2018-06-28 22:20:15 +00:00
add_interface_vendor_and_product-74e9815f20ee0cac.yaml Add vendor, product to interface information 2016-09-21 10:14:26 -04:00
add_mellanox_hardware_manager-edfae87964737df1.yaml Correct error in Infiniband release note 2017-02-13 13:16:43 +00:00
add-coreos-dhcp-rescue-support-1dd8e9d5ac9c7594.yaml Clean up release notes before a release 2018-01-16 12:29:33 +01:00
add-disk-wait-config-opts-fe805292baca8029.yaml Add configuration options for DISK_WAIT 2016-06-20 18:47:26 -04:00
add-hostname-8bbf24712b6a4919.yaml Get the hostname of the introspected host 2019-06-12 13:00:21 +00:00
add-log-extension-35ca22cc0709af4c.yaml Add a log extension 2016-06-28 17:02:11 +01:00
add-more-lan-channels-8f5197ed5f057c25.yaml Clean up release notes 2019-05-29 10:55:44 +02:00
add-numa-topology-info-8c253fd9e56169f1.yaml Release notes cleanup for Pike release 2017-08-14 13:30:20 -07:00
add-pci-devices-info-3f86934a505d1b31.yaml Add PCI devices collector to inspector 2016-06-24 14:50:58 +02:00
add-portal-port-arg-6d4faec2f709c8e9.yaml add new portal_port argument into iscsi.start_iscsi_target api 2016-03-24 13:32:42 +00:00
add-secondary-sorting-by-name-for-root-disks-4de2c0358b9a1e2c.yaml Update release notes 2019-03-18 15:11:27 +01:00
add-unit-test-cc4a1a05859ad17d.yaml Reduced restriction of parsing for dmidecode output 2016-02-22 22:46:28 +00:00
add-vendor-info-56be9a8605d80bf0.yaml Add 'system_vendor' information to data 2016-02-15 10:19:17 +09:00
additional-wwn-hints-ffd02ceafcb3dc70.yaml Catch up release notes for Mitaka 2015-12-16 16:34:21 -08:00
adds-smartctl-ata-check-to-secure-erase-caebba4f25821575.yaml Refuse secure erase if ATA command does not work 2018-06-28 18:38:10 +00:00
advertise-address-c3b152fe475fb539.yaml Bind to interface routable to the ironic host, not a random one 2016-03-21 14:21:12 +00:00
agent_partition_image-91941adc6683c673.yaml Add support for partition images in agent driver. 2016-03-18 08:21:01 +00:00
agent-fully-retries-image-downloads-67409a493c6d08ae.yaml Add full download retries 2020-06-23 20:27:41 +00:00
agent-token-support-1086218cf2a0c917.yaml Agent token support 2020-03-12 10:35:17 -07:00
ataraid_does_not_appear_as_disk-8a260e66b3496bf6.yaml Fix multi-device behavior 2018-09-24 19:10:38 -07:00
attempts-ata-disk-unlock-897d76c494ec2976.yaml Try to unlock failed device before proceeding 2018-06-18 19:43:40 +00:00
avoid-grub2-using-efibootmgr-bd27c0978d1cf71b.yaml Tidy up relese notes for 6.0.0 2020-02-07 17:06:44 +00:00
bindmount-run-4c6a31d3ee4e0ed6.yaml Clean up release notes 2019-05-29 10:55:44 +02:00
block-device-hctl-e81573812be3d469.yaml Add HCTL to BlockDevices 2016-12-07 16:51:30 +00:00
boot-info-f18336ada089f6dd.yaml Add boot information into the inventory 2016-05-26 17:05:11 +02:00
bootloader-ignored-uefi-mode-8578a009d5b5be62.yaml Return false for MBR bootloader check on UEFI machines 2020-03-23 10:41:04 -07:00
build-tinyipa-with-python3-d4a64aa18f970968.yaml Update release notes 2019-03-18 15:11:27 +01:00
build-tinyipa-with-tinycore8-b39d0415b1c25f6b.yaml Build tinyipa with tinycore 8.x 2019-01-29 13:02:48 +01:00
bumpsipalookupattempts-29de7c949aaf6556.yaml Tidy up relese notes for 6.0.0 2020-02-07 17:06:44 +00:00
check-partition-table-after-writing-34efbd557d8de7cb.yaml Attempt to read the partition table after writing an image 2018-11-19 18:57:23 +01:00
Collect_NIC_name_given_by_BIOS-657c68c0ae16365b.yaml Release notes cleanup for Pike release 2017-08-14 13:30:20 -07:00
collect-dmi-output-f2e9feabef16bacf.yaml Collect processor, memory and BIOS output of dmidecode 2017-06-28 10:23:45 -07:00
collect-more-8bc9ad4c63e873e1.yaml Collect lsblk and /proc/mdstat with ramdisk logs 2019-10-14 15:28:08 +02:00
coreos_ipa_image_poweroff_reboot_in_chroot_by_sysrq-42447fc4cdd7dafe.yaml Reboot and Poweroff fails with coreos IPA image 2017-01-20 12:55:12 -08:00
coreos-uses-chroot-8a01ba0b38a4a4f4.yaml Catch up release notes for Mitaka 2015-12-16 16:34:21 -08:00
correction-failure-output-when-downloading-image-39f93838d1ed2928.yaml Release notes cleanup for Pike release 2017-08-14 13:30:20 -07:00
cpu-flags-e3cec7e5cba069ef.yaml Returns CPU flags in the CPU inventory 2016-06-01 16:12:32 +02:00
deprecate-coreos-8b01bcf796c0dc54.yaml Deprecate CoreOS ramdisk support 2019-02-05 19:53:25 -08:00
device-hints-from-node-object-9a689f5a4175a1a6.yaml Get root device hints from the node object 2016-05-26 14:52:15 +01:00
discover-ipv6-bmc-address-b3b357ff6c5d822c.yaml Clean up release notes 2019-05-29 10:55:44 +02:00
disk-label-fix-536897e41a4d817f.yaml Add disk_label support for partition images 2016-03-22 16:59:38 +00:00
disk-wait-2e0e85e0947f80e9.yaml Wait for at least one suitable disk to appear on start up 2016-05-24 10:36:45 +02:00
drop-python2-2006fd8a4a6de56d.yaml Drop python 2.7 support and testing 2019-11-22 15:36:28 +05:30
enable-cleaning-fallback-57e8c9aa2f24e63d.yaml Provide fallback from ATA erase to shredding 2016-04-08 15:55:06 -04:00
enhance-checksum-2256ffdcce13836e.yaml Update release notes 2019-03-18 15:11:27 +01:00
erase_metadata_from_partitions-4f1902533d530b8f.yaml Update release notes 2019-03-18 15:11:27 +01:00
erase-device-metadata-clean-step-31b4a615c0ff7f18.yaml Add erase_devices_metadata cleaning step 2016-07-28 11:14:11 +01:00
executes-gpt-partition-fix-b6156cc16da00dfc.yaml Fix GPT partition tables after agent writes contents 2020-03-29 07:45:25 -07:00
extend-retry-timeout-30c930a33d97c193.yaml Extend retries to 9, 10 seconds apart. 2020-06-23 20:27:49 +00:00
fail_ipa_start_if_ironic_api_invalid-7b78fcaba2141cc5.yaml Improve grammar/readability in Ocata release notes 2017-02-13 18:11:52 +00:00
fallback-to-findfs-59abde55221e1e84.yaml Last resort fallback to find a partition 2019-10-15 16:35:17 +00:00
fix-agent-unable-to-stop-py3-6c210793476968d1.yaml Making ironic-python-agent able to stop with python 3.x 2019-02-04 09:55:08 +01:00
fix-bmc-ip-detection-for-coreos-483be0286593e393.yaml Fix BMC IP address detection on CoreOS images 2018-10-19 14:22:05 +01:00
fix-bytes-json-serializable-collected-logs-ad61022b287dc3e2.yaml Release notes cleanup for Pike release 2017-08-14 13:30:20 -07:00
fix-cleaning-read-only-device-c8a0f4cc2f434d99.yaml Skip read-only devices with metadata erase 2020-01-29 13:41:25 -06:00
fix-coreos-modprobe-75bda45c7bbeb469.yaml Load IPMI modules before chroot in CoreOS image 2016-11-22 12:23:27 +00:00
fix-hardcoded-path-to-grub-7006f29a9ef72e75.yaml Release notes clean up for the upcoming release 2017-10-17 16:18:39 +02:00
fix-high-cpu-usage-eventlet-1dccf3b81dd42c47.yaml Fix an issue with high cpu usage caused by ironic-python-agent 2020-05-25 22:18:17 +03:00
fix-iscsi-teardown-handling-0df2345318d3c843.yaml Suppress errors from iscsi session cleanup 2019-11-01 06:57:58 -07:00
fix-nic-without-numa-node-b401f97c46afa4a1.yaml Tidy up relese notes for 6.0.0 2020-02-07 17:06:44 +00:00
fix-physical-memory-arm64-957755f6cd91ad85.yaml Release notes cleanup for the next release 2019-09-04 15:24:56 +02:00
fix-to-pass-root-uuid-for-whole-disk-image-1c13b70f6b74bce0.yaml Clean up release notes before a release 2018-01-16 12:29:33 +01:00
fix-vfd-mount-for-capitalized-device-name-db7f519e900f4e22.yaml Fix vfd mount for capitalized device name 2016-02-08 16:33:14 +09:00
fixes-error-handling-of-efibootmgr-not-present-in-ramdisk-f11b4241edcf0e81.yaml Fixes error handling if efibootmgr is not present in ramdisk 2020-03-03 00:14:33 -06:00
get-holder-disks-with-nvme-7d5fa75df2fd5904.yaml Release notes cleanup for the next release 2019-09-04 15:24:56 +02:00
get-physical-memory-535a32362bcdf83a.yaml Clean up release notes 2019-05-29 10:55:44 +02:00
handle-configdrive-large-disks-3517e9fcf16c7f39.yaml Catch up release notes for Mitaka 2015-12-16 16:34:21 -08:00
handle-fd0-devices-3d1f31c3b34819e8.yaml Clean up release notes 2019-09-24 09:55:10 +02:00
handle-ssl-063a91fb7bdcf9b9.yaml Improve grammar/readability in Ocata release notes 2017-02-13 18:11:52 +00:00
image-checksum-39b2ceef40933c28.yaml Allow image checksum to be a URL 2019-02-25 14:28:09 +01:00
image-download-retries-65ac31fe4328e438.yaml Add timeout and retries when connection to an image server 2020-04-24 10:34:40 +02:00
improve-tgtd-status-d17173dc8f67959f.yaml Catch up release notes for Mitaka 2015-12-16 16:34:21 -08:00
inspection-to-report-disk-by-path-e3fd4c331d200903.yaml Release notes clean up for the upcoming release 2017-10-17 16:18:39 +02:00
inspection-wait-for-ips-223e39b65fef31bd.yaml Wait for the interfaces to get IP addresses before inspection 2016-04-05 20:03:33 +02:00
inspection-wait-for-ips-v2-146016f758d7010c.yaml [inspection] wait for the PXE DHCP by default and remove the carrier check 2016-05-10 18:12:46 +02:00
instance-info-root-device-02fed0966bb00fb3.yaml Allow reading root_device from instance_info 2020-01-03 17:29:05 +01:00
inventory-conf-29b59ebe97aefbde.yaml Expose collector and hardware manager names via introspection data 2020-01-22 11:15:38 +01:00
ip6-addresses-1c2b9bcd9a124de7.yaml Advertise the correct address when using IPv6 2017-01-11 11:00:56 +00:00
ipa-debug-68c86101b1fdc3d9.yaml Allow enabling debug level via kernel cmdline 2016-02-26 12:34:20 +01:00
ipmi-address-channel-b6b8010c41d05c1b.yaml Remove assumption that a valid IPMI channel cannot follow an invalid one 2017-09-11 18:43:24 +02:00
ipmi-cleanup-a4454f6851d81c4d.yaml Clean up deprecated items in the inspection code 2017-09-19 14:05:13 +02:00
ipv6-listen-85d40e58156e398f.yaml Improve grammar/readability in Ocata release notes 2017-02-13 18:11:52 +00:00
ipv6-provision-42e9000f6f6a7a3a.yaml Improve grammar/readability in Ocata release notes 2017-02-13 18:11:52 +00:00
iscsi-detection-on-diskless-hw-f27dcce3aaa35ac2.yaml Follow-up text changes for 327807 2016-07-21 09:54:51 -04:00
jitter-for-inspection-command-5a226927757a0308.yaml Add jitter to inspection command reporting 2020-03-31 08:13:13 -07:00
let_crypt_generate_the_salt-99876591325275a1.yaml Use crypt to generate salt 2020-03-19 15:16:00 +01:00
limit-qemu-img-ram-usage-d7b7a16ac5e9c917.yaml Improve grammar/readability in Ocata release notes 2017-02-13 18:11:52 +00:00
lldp-error-handling-5b6576b378ef9c3a.yaml Improve grammar/readability in Ocata release notes 2017-02-13 18:11:52 +00:00
LLDP-ignore-NICs-that-are-not-plugged-in-29213f0a701a72e4.yaml Clean up release notes before a release 2018-01-16 12:29:33 +01:00
lldp-loop-fdfa584caf33d847.yaml Build socket list right before select call 2016-08-17 16:35:07 +02:00
logs-collector-non-ascii-010339bf256443c8.yaml Catch up release notes for Mitaka 2015-12-16 16:34:21 -08:00
lshw-cb89894be057bdc9.yaml Clean up release notes 2019-09-24 09:55:10 +02:00
lshw-for-memory-and-system-info-35c69da067c72b36.yaml Use lshw in place of dmidecode for the default hardware manager 2018-01-30 15:54:10 +00:00
manual-introspection-b04b5c25f5e004ac.yaml manual introspection trigger command 2019-07-08 07:43:40 -07:00
md-restart-9e0d47863a086792.yaml Rescan after restarting the md device 2020-03-29 14:47:41 +00:00
mdns-e020484e64d76edb.yaml Supports fetching API endpoints from mDNS 2019-05-29 16:58:24 +02:00
min-ironic-ocata-dff80e567783e87c.yaml Move minimum ironic version to latest ocata 2020-04-08 15:40:02 +02:00
multiple-lan-channels-ee32d80150f990bf.yaml Release notes cleanup for Pike release 2017-08-14 13:30:20 -07:00
name-root-device-hints-0cfc8c90d03c8bf0.yaml Extend root device hints to support device name 2016-02-02 10:32:39 +00:00
new-agent-api-afbe7391493749be.yaml Use new agent API if available 2016-08-05 12:02:41 +02:00
new-sync-command-6f5fa55df2fd5903.yaml Add sync() command to the standby module 2016-03-18 15:20:48 +00:00
no-bash-for-grub-c38369af8cc7cf26.yaml Improve grammar/readability in Ocata release notes 2017-02-13 18:11:52 +00:00
no-coreos-3345cc69009dead9.yaml Remove support for CoreOS images 2019-08-28 19:46:37 +02:00
no-link-local-2e861978c5c7bf30.yaml Ignore IPv6 link local addresses 2017-11-21 10:11:21 +00:00
no-sample-ac11bd0fa27af62a.yaml Remove the configuration sample file 2019-12-02 12:11:58 +01:00
no-zram-78cc6583f4f90a9c.yaml Do not try to use zRAM devices for anything 2019-08-07 16:10:51 +02:00
old-inspector-data-5e63c9bce72b4fb5.yaml Remove compatibility with old bash-based introspection ramdisk 2017-01-09 14:10:47 +01:00
oslo-config-generator-b0f70b9fb7e23997.yaml Improve grammar/readability in Ocata release notes 2017-02-13 18:11:52 +00:00
parallel-erase-disk-devices-09ea33d5443aead0.yaml Update release notes 2019-03-18 15:11:27 +01:00
permit-pre-hashed-rescue-passwords-4275f6e697533cec.yaml Permit hashed passwords to be sent to IPA. 2019-12-19 11:19:48 -08:00
pint-0.5-816aaf3a4f6d4a6e.yaml Fix compatibility with Pint 0.5 2019-09-25 11:53:11 +02:00
prefix-lldp-timeout-50acc656313d8dd2.yaml lldp-timeout kernel parameter missing ipa- prefix 2016-06-03 12:17:55 -04:00
raid5-6-support-0807597c3633a26c.yaml RAID 5/6 2019-11-27 20:30:28 +00:00
raid-hints-604f9ffdd86432eb.yaml Allow specifying target devices for software RAID 2020-03-17 13:03:24 +01:00
relax-checksum-feeding-11044ae02b411a07.yaml Clean up release notes 2019-09-24 09:55:10 +02:00
remove-switch_port_descr-switch_chassis_descr-40f2bb37b5f1fdd1.yaml Improve grammar/readability in Ocata release notes 2017-02-13 18:11:52 +00:00
remove-sysrq-2c2804930180f408.yaml Replace SYSRQ commands 2016-03-21 12:57:50 +00:00
remove-vendor-passthru-eda3519c322eb4e2.yaml Remove old lookup/heartbeat from IPA 2016-11-09 16:34:44 +00:00
rescan-before-checking-uefi-64597c937880134d.yaml Rescan devices before performing uefi checks 2020-03-16 05:57:54 -07:00
rescue-dhcp_network-for-tinyipa-a14de5fae38a5dce.yaml Adds a releasenote for DHCP support for TinyIPA 2018-01-31 10:24:44 -08:00
rework-ata-secure-erase-c6684962ef078281.yaml spelling error 2018-11-24 11:20:34 +08:00
root-device-hints-rotational-67e6e61074c26561.yaml Extend root device hints to support "rotational" 2016-07-11 14:30:35 +01:00
set-clock-prior-to-poweroff-af6ec210aad8b45a.yaml Amending ntp time sync release note 2020-03-11 13:45:12 -07:00
skip-lookup-and-heartbeat-if-apiurl-not-configured-5ae8b04ae1e74673.yaml Improve grammar/readability in Ocata release notes 2017-02-13 18:11:52 +00:00
skips-bootloader-install-35c463195aa61800.yaml Don't try to put a bootloader in place when bootable 2019-11-01 13:58:55 +00:00
sleep-ebe58fbe07d30219.yaml Add a configurable sleep before IPA starts working 2016-05-24 10:39:52 +02:00
softraid-bootable-with-uefi-aa22e6cbaf1ea747.yaml Editing follow-up for UEFI Software RAID support 2020-04-06 18:03:25 +02:00
softraid-creation-on-nvme-a2fd4c531d200904.yaml Release notes cleanup for the next release 2019-09-04 15:24:56 +02:00
softraid-partitioning-refactor-104b817c3bdc73e3.yaml Release notes cleanup for the next release 2019-09-04 15:24:56 +02:00
softraid-zap-superblocks-anywhere.yaml Delete_configuration, consider removed raid members as well 2019-09-16 11:27:27 +02:00
software_raid_use_rootfs_uuid-9149cc0c8638d5d5.yaml Tidy up relese notes for 6.0.0 2020-02-07 17:06:44 +00:00
software-raid-4a88e6c5af9ea742.yaml Software RAID: Create/delete configurations 2019-06-04 12:33:40 +02:00
start_passing_agent_version_to_ironic-6fa8670ae0e7eb38.yaml Include IPA Version during heartbeat 2017-12-07 12:16:06 +00:00
stream-raw-images-d2e245aaed991d86.yaml Catch up release notes for Mitaka 2015-12-16 16:34:21 -08:00
streaming-partition-images-cdeb260ef8f90012.yaml Allow streaming raw partition images 2018-10-17 11:16:04 +02:00
support-collecting-ipv6-address-dd819d543f851a63.yaml Collect IPv6 address during introspection 2018-07-24 09:22:40 +08:00
support-image-proxy-e2987a6589375451.yaml Catch up release notes for Mitaka 2015-12-16 16:34:21 -08:00
support-linux-io-6bbd7ff1f0d70a0e.yaml Catch up release notes for Mitaka 2015-12-16 16:34:21 -08:00
support-lldp-in-inventory-4ab6e45ccd35dace.yaml Support LLDP data as part of interfaces in inventory 2016-06-22 18:26:04 +01:00
support-prep-partitions-5e273572ab7ce018.yaml Install grub to PReP partition when prep_boot_part_uuid is provided 2018-07-20 16:07:16 +00:00
suse-tinyipa-support-20acecd6d7b20952.yaml imagebuild: tinyipa: Make the install-deps.sh SUSE aware 2017-02-09 14:45:39 +00:00
sw-raid-assemble-9c20fe967f73d1dd.yaml Software RAID: try to assemble RAID on start-up 2019-08-09 13:28:25 +02:00
timeout_on_file_download-ed77918318316075.yaml Add timeout operations to try and prevent hang on read() 2020-06-23 13:25:09 -07:00
tinycore-ipv6-1b620c61402b5720.yaml Add IPv6 module for tinycore 2019-06-13 17:39:05 -07:00
tinyipa-python3-default-b8434793e17465db.yaml Update release notes 2019-03-18 15:11:27 +01:00
tinyipa-rescue-dhcp-multi-tenant-b32bda7bf2b12679.yaml Rescue bug: tinyipa fails to acquire IP in multitenant env 2018-05-15 14:33:36 +07:00
tinyipa-ssh-e8a3a01a3f3ff5f4.yaml Enable SSH access to tinyipa 2016-09-19 19:02:55 +03:00
udev-settle-f75db34db990ad68.yaml Wait for udev to settle before listing the block devices 2016-03-02 10:54:51 +00:00
uefi-esp-660fc2c650e6af92.yaml A boot partition on a GPT disk should be considered an EFI partition 2020-04-15 18:38:15 +02:00
uefi-fallback-266c647f6aff58fd.yaml Improve grammar/readability in Ocata release notes 2017-02-13 18:11:52 +00:00
use-latest-coreos-87f826d26b46548d.yaml Catch up release notes for Mitaka 2015-12-16 16:34:21 -08:00
use-system-random-00b0721c8ebd0c5a.yaml Catch up release notes for Mitaka 2015-12-16 16:34:21 -08:00
wait-for-interfaces-before-lookup-9bf38852b2f176a1.yaml Wait for at least one interface before node lookup 2016-06-14 12:36:52 +00:00
wait-root-device-504b517c3aec73e2.yaml Fix waiting for target disk to appear 2017-10-16 15:39:25 +02:00