Add documentation for iRMC virtual media driver
This commit documents the information on enabling and configuring iRMC virtual media driver(s). Change-Id: I6792d5ee7af81cc9af2151e701d5cf59879c9af5 Implements: blueprint irmc-virtualmedia-deploy-driver
This commit is contained in:
Naohiro Tamura
parent
b210e41c48
commit
e01ec7fe84
|
|
@ -66,45 +66,10 @@ SeaMicro driver
|
|||
iRMC
|
||||
----
|
||||
|
||||
The iRMC driver enables PXE deploy to control power via ServerView Common
|
||||
Command Interface (SCCI).
|
||||
|
||||
Software requirements
|
||||
^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
- Install `python-scciclient package <https://pypi.python.org/pypi/python-scciclient>`_::
|
||||
|
||||
$ pip install "python-scciclient>=0.1.0"
|
||||
|
||||
Enabling the iRMC driver
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
- Add ``pxe_irmc`` to the list of ``enabled_drivers in``
|
||||
``/etc/ironic/ironic.conf``
|
||||
- Ironic Conductor must be restarted for the new driver to be loaded.
|
||||
|
||||
Ironic node configuration
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
Nodes are configured for iRMC with PXE deploy by setting the ironic node
|
||||
object's ``driver`` property to be ``pxe_irmc``. Further configuration values
|
||||
are added to ``driver_info``:
|
||||
|
||||
- ``irmc_address``: hostname or IP of iRMC
|
||||
- ``irmc_username``: username for iRMC with administrator privileges
|
||||
- ``irmc_password``: password for irmc_username
|
||||
- ``irmc_port``: port number of iRMC (optional, either 80 or 443. defalut 443)
|
||||
- ``irmc_auth_method``: authentication method for iRMC (optional, either
|
||||
'basic' or 'digest'. default is 'basic')
|
||||
|
||||
Supported platforms
|
||||
^^^^^^^^^^^^^^^^^^^
|
||||
This driver supports FUJITSU PRIMERGY BX S4 or RX S8 servers and above.
|
||||
|
||||
- PRIMERGY BX920 S4
|
||||
- PRIMERGY BX924 S4
|
||||
- PRIMERGY RX300 S8
|
||||
.. toctree::
|
||||
:maxdepth: 1
|
||||
|
||||
../drivers/irmc
|
||||
|
||||
VirtualBox drivers
|
||||
------------------
|
||||
|
|
|
|||
|
|
@ -0,0 +1,219 @@
|
|||
.. _irmc:
|
||||
|
||||
============
|
||||
iRMC drivers
|
||||
============
|
||||
|
||||
Overview
|
||||
========
|
||||
|
||||
The iRMC driver enables control FUJITSU PRIMERGY via ServerView
|
||||
Common Command Interface (SCCI).
|
||||
|
||||
There are 3 iRMC drivers:
|
||||
|
||||
* ``pxe_irmc``.
|
||||
* ``iscsi_irmc``
|
||||
* ``agent_irmc``
|
||||
|
||||
Prerequisites
|
||||
=============
|
||||
|
||||
* Install `python-scciclient package <https://pypi.python.org/pypi/python-scciclient>`_::
|
||||
|
||||
$ pip install "python-scciclient>=0.2.0"
|
||||
|
||||
Drivers
|
||||
=======
|
||||
|
||||
pxe_irmc driver
|
||||
^^^^^^^^^^^^^^^
|
||||
|
||||
This driver enables PXE deploy and power control via ServerView Common
|
||||
Command Interface (SCCI).
|
||||
|
||||
Enabling the driver
|
||||
~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
- Add ``pxe_irmc`` to the list of ``enabled_drivers`` in ``[DEFAULT]``
|
||||
section of ``/etc/ironic/ironic.conf``.
|
||||
- Ironic Conductor must be restarted for the new driver to be loaded.
|
||||
|
||||
Node configuration
|
||||
~~~~~~~~~~~~~~~~~~
|
||||
|
||||
* Each node is configured for iRMC with PXE deploy by setting the
|
||||
following ironic node object’s properties:
|
||||
|
||||
- ``driver`` property to be ``pxe_irmc``
|
||||
- ``driver_info/irmc_address`` property to be ``IP address`` or
|
||||
``hostname`` of the iRMC.
|
||||
- ``driver_info/irmc_username`` property to be ``username`` for
|
||||
the iRMC with administrator privileges.
|
||||
- ``driver_info/irmc_password`` property to be ``password`` for
|
||||
irmc_username.
|
||||
- ``properties/capabilities`` property to be ``boot_mode:uefi`` if
|
||||
UEFI boot is required.
|
||||
|
||||
* All of nodes are configured by setting the following configuration
|
||||
options in ``[irmc]`` section of ``/etc/ironic/ironic.conf``:
|
||||
|
||||
- ``port``: Port to be used for iRMC operations; either 80
|
||||
or 443. The default value is 443. Optional.
|
||||
- ``auth_method``: Authentication method for iRMC operations;
|
||||
either ``basic`` or ``digest``. The default value is ``basic``. Optional.
|
||||
- ``client_timeout``: Timeout (in seconds) for iRMC
|
||||
operations. The default value is 60. Optional.
|
||||
- ``sensor_method``: Sensor data retrieval method; either
|
||||
``ipmitool`` or ``scci``. The default value is ``ipmitool``. Optional.
|
||||
|
||||
* Each node can be further configured by setting the following ironic
|
||||
node object’s properties which override the parameter values in
|
||||
``[irmc]`` section of ``/etc/ironic/ironic.conf``:
|
||||
|
||||
- ``driver_info/irmc_port`` property overrides ``port``.
|
||||
- ``driver_info/irmc_auth_method`` property overrides ``auth_method``.
|
||||
- ``driver_info/irmc_client_timeout`` property overrides ``client_timeout``.
|
||||
- ``driver_info/irmc_sensor_method`` property overrides ``sensor_method``.
|
||||
|
||||
|
||||
iscsi_irmc driver
|
||||
^^^^^^^^^^^^^^^^^
|
||||
|
||||
This driver enables Virtual Media deploy with image build from
|
||||
Diskimage Builder and power control via ServerView Common Command
|
||||
Interface (SCCI).
|
||||
|
||||
Enabling the driver
|
||||
~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
- Add ``iscsi_irmc`` to the list of ``enabled_drivers`` in
|
||||
``[DEFAULT]`` section of ``/etc/ironic/ironic.conf``.
|
||||
- Ironic Conductor must be restarted for the new driver to be loaded.
|
||||
|
||||
Node configuration
|
||||
~~~~~~~~~~~~~~~~~~
|
||||
|
||||
* Each node is configured for iRMC with PXE deploy by setting the
|
||||
followings ironic node object’s properties:
|
||||
|
||||
- ``driver`` property to be ``iscsi_irmc``
|
||||
- ``driver_info/irmc_address`` property to be ``IP address`` or
|
||||
``hostname`` of the iRMC.
|
||||
- ``driver_info/irmc_username`` property to be ``username`` for
|
||||
the iRMC with administrator privileges.
|
||||
- ``driver_info/irmc_password`` property to be ``password`` for
|
||||
irmc_username.
|
||||
- ``properties/capabilities`` property to be ``boot_mode:uefi`` if
|
||||
UEFI boot is required.
|
||||
- ``driver_info/irmc_deploy_iso`` property to be either ``deploy iso
|
||||
file name``, ``Glance UUID``, ``Glance URL`` or ``Image Service
|
||||
URL``.
|
||||
- ``instance info/irmc_boot_iso`` property to be either ``boot iso
|
||||
file name``, ``Glance UUID``, ``Glance URL`` or ``Image Service
|
||||
URL``. This is optional property for ``netboot``.
|
||||
|
||||
* All of nodes are configured by setting the following configuration
|
||||
options in ``[irmc]`` section of ``/etc/ironic/ironic.conf``:
|
||||
|
||||
- ``port``: Port to be used for iRMC operations; either ``80``
|
||||
or ``443``. The default value is ``443``. Optional.
|
||||
- ``auth_method``: Authentication method for iRMC operations;
|
||||
either ``basic`` or ``digest``. The default value is ``basic``. Optional.
|
||||
- ``client_timeout``: Timeout (in seconds) for iRMC
|
||||
operations. The default value is 60. Optional.
|
||||
- ``sensor_method``: Sensor data retrieval method; either
|
||||
``ipmitool`` or ``scci``. The default value is ``ipmitool``. Optional.
|
||||
- ``remote_image_share_root``: Ironic conductor node's ``NFS`` or
|
||||
``CIFS`` root path. The default value is ``/remote_image_share_root``.
|
||||
- ``remote_image_server``: IP of remote image server.
|
||||
- ``remote_image_share_type``: Share type of virtual media, either
|
||||
``NFS`` or ``CIFS``. The default is ``CIFS``.
|
||||
- ``remote_image_share_name``: share name of ``remote_image_server``.
|
||||
The default value is ``share``.
|
||||
- ``remote_image_user_name``: User name of ``remote_image_server``.
|
||||
- ``remote_image_user_password``: Password of ``remote_image_user_name``.
|
||||
- ``remote_image_user_domain``: Domain name of ``remote_image_user_name``.
|
||||
|
||||
* Each node can be further configured by setting the following ironic
|
||||
node object’s properties which override the parameter values in
|
||||
``[irmc]`` section of ``/etc/ironic/ironic.conf``:
|
||||
|
||||
- ``driver_info/irmc_port`` property overrides ``port``.
|
||||
- ``driver_info/irmc_auth_method`` property overrides ``auth_method``.
|
||||
- ``driver_info/irmc_client_timeout`` property overrides ``client_timeout``.
|
||||
- ``driver_info/irmc_sensor_method`` property overrides ``sensor_method``.
|
||||
|
||||
|
||||
agent_irmc driver
|
||||
^^^^^^^^^^^^^^^^^
|
||||
|
||||
This driver enables Virtual Media deploy with IPA (Ironic Python
|
||||
Agent) and power control via ServerView Common Command Interface
|
||||
(SCCI).
|
||||
|
||||
Enabling the driver
|
||||
~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
- Add ``agent_irmc`` to the list of ``enabled_drivers`` in
|
||||
``[DEFAULT]`` section of ``/etc/ironic/ironic.conf``.
|
||||
- Ironic Conductor must be restarted for the new driver to be loaded.
|
||||
|
||||
Node configuration
|
||||
~~~~~~~~~~~~~~~~~~
|
||||
|
||||
* Each node is configured for iRMC with PXE deploy by setting the
|
||||
followings ironic node object’s properties:
|
||||
|
||||
- ``driver`` property to be ``agent_irmc``
|
||||
- ``driver_info/irmc_address`` property to be ``IP address`` or
|
||||
``hostname`` of the iRMC.
|
||||
- ``driver_info/irmc_username`` property to be ``username`` for
|
||||
the iRMC with administrator privileges.
|
||||
- ``driver_info/irmc_password`` property to be ``password`` for
|
||||
irmc_username.
|
||||
- ``properties/capabilities`` property to be ``boot_mode:uefi`` if
|
||||
UEFI boot is required.
|
||||
- ``driver_info/irmc_deploy_iso`` property to be either ``deploy iso
|
||||
file name``, ``Glance UUID``, ``Glance URL`` or ``Image Service
|
||||
URL``.
|
||||
|
||||
* All of nodes are configured by setting the following configuration
|
||||
options in ``[irmc]`` section of ``/etc/ironic/ironic.conf``:
|
||||
|
||||
- ``port``: Port to be used for iRMC operations; either 80
|
||||
or 443. The default value is 443. Optional.
|
||||
- ``auth_method``: Authentication method for iRMC operations;
|
||||
either ``basic`` or ``digest``. The default value is ``basic``. Optional.
|
||||
- ``client_timeout``: Timeout (in seconds) for iRMC
|
||||
operations. The default value is 60. Optional.
|
||||
- ``sensor_method``: Sensor data retrieval method; either
|
||||
``ipmitool`` or ``scci``. The default value is ``ipmitool``. Optional.
|
||||
- ``remote_image_share_root``: Ironic conductor node's ``NFS`` or
|
||||
``CIFS`` root path. The default value is ``/remote_image_share_root``.
|
||||
- ``remote_image_server``: IP of remote image server.
|
||||
- ``remote_image_share_type``: Share type of virtual media, either
|
||||
``NFS`` or ``CIFS``. The default is ``CIFS``.
|
||||
- ``remote_image_share_name``: share name of ``remote_image_server``.
|
||||
The default value is ``share``.
|
||||
- ``remote_image_user_name``: User name of ``remote_image_server``.
|
||||
- ``remote_image_user_password``: Password of ``remote_image_user_name``.
|
||||
- ``remote_image_user_domain``: Domain name of ``remote_image_user_name``.
|
||||
|
||||
* Each node can be further configured by setting the following ironic
|
||||
node object’s properties which override the parameter values in
|
||||
``[irmc]`` section of ``/etc/ironic/ironic.conf``:
|
||||
|
||||
- ``driver_info/irmc_port`` property overrides ``port``.
|
||||
- ``driver_info/irmc_auth_method`` property overrides ``auth_method``.
|
||||
- ``driver_info/irmc_client_timeout`` property overrides ``client_timeout``.
|
||||
- ``driver_info/irmc_sensor_method`` property overrides ``sensor_method``.
|
||||
|
||||
|
||||
Supported platforms
|
||||
===================
|
||||
This driver supports FUJITSU PRIMERGY BX S4 or RX S8 servers and above.
|
||||
|
||||
- PRIMERGY BX920 S4
|
||||
- PRIMERGY BX924 S4
|
||||
- PRIMERGY RX300 S8
|
||||
|
|
@ -8,7 +8,7 @@ proliantutils>=2.1.1
|
|||
pyghmi
|
||||
pysnmp
|
||||
python-ironic-inspector-client
|
||||
python-scciclient>=0.1.0
|
||||
python-scciclient>=0.2.0
|
||||
python-seamicroclient>=0.4.0
|
||||
UcsSdk==0.8.2.2
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue