Lucas Alvares Gomes 1d54000e86 Update installation guide for syslinux 6

Fedora 21 and the next Ubuntu will have syslinux 6 in them. In syslinux
6 modules are not "stand alone" as it was in versions prior to 4, see:
http://www.syslinux.org/wiki/index.php/Library_modules

Partial-Bug: #1351010
Change-Id: Ie6bb031c10a9f8cf978e2c5dbd643b4a19cc93d0

2014-09-02 16:14:05 +01:00

16 KiB

Raw Blame History

Bare Metal Service Installation Guide

Service Overview

The Bare Metal Service is a collection of components that provides support to manage and provision physical machines.

Also known as the ironic project, the Bare Metal Service interacts with several other OpenStack services such as:

the Identity Service (keystone) for request authentication and to locate other OpenStack services
the Image Service (glance) from which to retrieve images
the Networking Service (neutron) for DHCP and network configuration
the Compute Service (nova), which leverages the Bare Metal Service to manage compute instances on bare metal.

The Bare Metal Service includes the following components:

ironic-api. A RESTful API that processes application requests by sending them to the ironic-conductor over RPC.
ironic-conductor. Adds/edits/deletes nodes; powers on/off nodes with ipmi or ssh; provisions/deploys/decommissions bare metal nodes.
Ironic client. A command-line interface (CLI) for interacting with the Bare Metal Service.

Additionally, the Bare Metal Servive has certain external dependencies, which are very similar to other OpenStack Services:

A database to store hardware information and state. You can set the database backend type and location. A simple approach is to use the same database backend as the Compute Service. Another approach is to use a separate database backend to further isolate bare metal resources (and associated metadata) from users.
A queue. A central hub for passing messages. It should use the same implementation as that of the Compute Service (typically RabbitMQ).

Install and Configure Prerequisites

The Bare Metal Service is a collection of components that provides support to manage and provision physical machines. You can configure these components to run on separate nodes or the same node. In this guide, the components run on one node, typically the Compute Service's compute node.

This section shows you how to install and configure the components.

It assumes that the Identity Service, Image Service, Compute Service, and Networking Service have already been set up.

Configure Identity Service for Bare Metal

Create the Bare Metal service user (eg ironic). The service uses this to authenticate with the Identity Service. Use the service tenant and give the user the admin role:
```
keystone user-create --name=ironic --pass=IRONIC_PASSWORD --email=ironic@example.com
keystone user-role-add --user=ironic --tenant=service --role=admin
```
You must register the Bare Metal Service with the Identity Service so that other OpenStack services can locate it. To register the service:
```
keystone service-create --name=ironic --type=baremetal \
--description="Ironic bare metal provisioning service"
```
Use the id property that is returned from the Identity Service when registering the service (above), to create the endpoint, and replace IRONIC_NODE with your Bare Metal Service's API node:
```
keystone endpoint-create \
--service-id=the_service_id_above \
--publicurl=http://IRONIC_NODE:6385 \
--internalurl=http://IRONIC_NODE:6385 \
--adminurl=http://IRONIC_NODE:6385
```

Set up the Database for Bare Metal

The Bare Metal Service stores information in a database. This guide uses the MySQL database that is used by other OpenStack services.

In MySQL, create an ironic database that is accessible by the ironic user. Replace IRONIC_DBPASSWORD with the actual password:

# mysql -u root -p
mysql> CREATE DATABASE ironic CHARACTER SET utf8;
mysql> GRANT ALL PRIVILEGES ON ironic.* TO 'ironic'@'localhost' \
IDENTIFIED BY 'IRONIC_DBPASSWORD';
mysql> GRANT ALL PRIVILEGES ON ironic.* TO 'ironic'@'%' \
IDENTIFIED BY 'IRONIC_DBPASSWORD';

Install the Bare Metal Service

Install from packages:

# Available in Ubuntu 14.04 (trusty)
apt-get install ironic-api ironic-conductor python-ironicclient

Configure the Bare Metal Service

The Bare Metal Service is configured via its configuration file. This file is typically located at /etc/ironic/ironic.conf.

Although some configuration options are mentioned here, it is recommended that you review all the available options so that the Bare Metal Service is configured for your needs.

The Bare Metal Service stores information in a database. This guide uses the MySQL database that is used by other OpenStack services.

Configure the location of the database via the connection option. In the following, replace IRONIC_DBPASSWORD with the password of your ironic user, and replace DB_IP with the IP address where the DB server is located:
```
[database]
...

# The SQLAlchemy connection string used to connect to the
# database (string value)
#connection=<None>
connection = mysql://ironic:IRONIC_DBPASSWORD@DB_IP/ironic?charset=utf8
```

Configure the Bare Metal Service to use the RabbitMQ message broker by setting one or more of these options. Replace RABBIT_HOST with the address of the RabbitMQ server.:

[DEFAULT]
...
# The RabbitMQ broker address where a single node is used
# (string value)
rabbit_host=RABBIT_HOST

# The RabbitMQ userid (string value)
#rabbit_userid=guest

# The RabbitMQ password (string value)
#rabbit_password=guest

# The RabbitMQ virtual host (string value)
#rabbit_virtual_host=/

Configure the Bare Metal Service to use these credentials with the Identity Service. Replace IDENTITY_IP with the IP of the Identity server, and replace IRONIC_PASSWORD with the password you chose for the ironic user in the Identity Service:

[DEFAULT]
...
# Method to use for authentication: noauth or keystone.
# (string value)
auth_strategy=keystone

...
[keystone_authtoken]

# Host providing the admin Identity API endpoint (string
# value)
#auth_host=127.0.0.1
auth_host=IDENTITY_IP

# Port of the admin Identity API endpoint (integer value)
#auth_port=35357

# Protocol of the admin Identity API endpoint(http or https)
# (string value)
#auth_protocol=https

# Complete public Identity API endpoint (string value)
#auth_uri=<None>
auth_uri=http://IDENTITY_IP:5000/

# Keystone account username (string value)
#admin_user=<None>
admin_user=ironic

# Keystone account password (string value)
#admin_password=<None>
admin_password=IRONIC_PASSWORD

# Keystone service account tenant name to validate user tokens
# (string value)
#admin_tenant_name=admin
admin_tenant_name=service

# Directory used to cache files related to PKI tokens (string
# value)
#signing_dir=<None>

Set the URL (replace NEUTRON_IP) for connecting to the Networking service, to be the Networking service endpoint:
```
[neutron]

# URL for connecting to neutron. (string value)
#url=http://127.0.0.1:9696
url=http://NEUTRON_IP:9696
```

Configure the Bare Metal Service so that it can communicate with the Image Service. Replace GLANCE_IP with the hostname or IP address of the Image Service:

[glance]

# A list of URL schemes that can be downloaded directly via
# the direct_url.  Currently supported schemes: [file]. (list
# value)
#allowed_direct_url_schemes=

# Default glance hostname or IP address. (string value)
#glance_host=$my_ip
glance_host=GLANCE_IP

# Default glance port. (integer value)
#glance_port=9292

# Default protocol to use when connecting to glance. Set to
# https for SSL. (string value)
#glance_protocol=http

# A list of the glance api servers available to nova. Prefix
# with https:// for SSL-based glance API servers. Format is
# [hostname|IP]:port. (string value)
#glance_api_servers=<None>

Create the Bare Metal Service database tables:

ironic-dbsync --config-file /etc/ironic/ironic.conf

Restart the Bare Metal Service:

service ironic-api restart
service ironic-conductor restart

Configure Compute Service to use the Bare Metal Service

The Compute Service needs to be configured to use the Bare Metal Service's driver. The configuration file for the Compute Service is typically located at /etc/nova/nova.conf. This configuration file must be modified on the Compute Service's controller nodes and compute nodes.

Change these configuration options in the default section, as follows:

[default]

# Driver to use for controlling virtualization. Options
# include: libvirt.LibvirtDriver, xenapi.XenAPIDriver,
# fake.FakeDriver, baremetal.BareMetalDriver,
# vmwareapi.VMwareESXDriver, vmwareapi.VMwareVCDriver (string
# value)
#compute_driver=<None>
compute_driver=ironic.nova.virt.ironic.IronicDriver

# Firewall driver (defaults to hypervisor specific iptables
# driver) (string value)
#firewall_driver=<None>
firewall_driver=nova.virt.firewall.NoopFirewallDriver

# The scheduler host manager class to use (string value)
#scheduler_host_manager=nova.scheduler.host_manager.HostManager
scheduler_host_manager=ironic.nova.scheduler.ironic_host_manager.IronicHostManager

# Virtual ram to physical ram allocation ratio which affects
# all ram filters. This configuration specifies a global ratio
# for RamFilter. For AggregateRamFilter, it will fall back to
# this configuration value if no per-aggregate setting found.
# (floating point value)
#ram_allocation_ratio=1.5
ram_allocation_ratio=1.0

# Amount of disk in MB to reserve for the host (integer value)
#reserved_host_disk_mb=0
reserved_host_memory_mb=0

# Full class name for the Manager for compute (string value)
#compute_manager=nova.compute.manager.ComputeManager
compute_manager=ironic.nova.compute.manager.ClusteredComputeManager

Change these configuration options in the ironic section. Replace:
- IRONIC_PASSWORD with the password you chose for the ironic user in the Identity Service
- IRONIC_NODE with the hostname or IP address of the ironic-api node
- IDENTITY_IP with the IP of the Identity server

[ironic]

# Ironic keystone admin name
admin_username=ironic

#Ironic keystone admin password.
admin_password=IRONIC_PASSWORD

# keystone API endpoint
admin_url=http://IDENTITY_IP:35357/v2.0

# Ironic keystone tenant name.
admin_tenant_name=service

# URL for Ironic API endpoint.
api_endpoint=http://IRONIC_NODE:6385/v1

On the Compute Service's controller nodes, restart nova-scheduler process:
```
service nova-scheduler restart
```
On the Compute Service's compute nodes, restart the nova-compute process:
```
service nova-compute restart
```

Setup the drivers for Bare Metal Service

PXE Setup

If you will be using PXE, it needs to be set up on the Bare Metal Service node(s) where ironic-conductor is running.

Make sure the tftp root directory exist and can be written to by the user the ironic-conductor is running as. For example:
```
sudo mkdir -p /tftpboot
sudo chown -R ironic -p /tftpboot
```

Install the syslinux package with the PXE boot images:

Ubuntu:
    sudo apt-get install syslinux syslinux-common

Fedora/RHEL:
    sudo yum install syslinux-tftpboot

Copy the PXE image to /tftpboot. The PXE image might be found at¹:
```
Ubuntu:
    sudo cp /usr/lib/syslinux/pxelinux.0 /tftpboot
```
If the version of syslinux is greater than 4 we also need to make sure that we copy the library modules into the /tftpboot directory² ³:
```
Ubuntu:
    sudo cp /usr/lib/syslinux/modules/*/ldlinux.* /tftpboot
```

iPXE Setup

An alternative to PXE boot, iPXE was introduced in the Juno release (2014.2.0) of Ironic.

If you will be using iPXE to boot instead of PXE, iPXE needs to be set up on the Bare Metal Service node(s) where ironic-conductor is running.

Make sure these directories exist and can be written to by the user the ironic-conductor is running as. For example:

sudo mkdir -p /tftpboot
sudo mkdir -p /httpboot
sudo chown -R ironic -p /tftpboot
sudo chown -R ironic -p /httpboot

Set up TFTP and HTTP servers.

These servers should be running and configured to use the local /tftpboot and /httpboot directories respectively, as their root directories. (Setting up these servers is outside the scope of this install guide.)

These root directories need to be mounted locally to the ironic-conductor services, so that the services can access them.

The Bare Metal Service's configuration file (/etc/ironic/ironic.conf) should be edited accordingly to specify the TFTP and HTTP root directories and server addresses. For example:
[pxe]

# Ironic compute node's http root path. (string value)
http_root=/httpboot

# Ironic compute node's tftp root path. (string value)
tftp_root=/tftpboot

# IP address of Ironic compute node's tftp server. (string
# value)
tftp_server=192.168.0.2

# Ironic compute node's HTTP server URL. Example:
# http://192.1.2.3:8080 (string value)
http_url=http://192.168.0.2:8080

Install the iPXE package with the boot images:

Ubuntu:
    apt-get install ipxe

Fedora/RHEL:
    yum install ipxe-bootimgs

Copy the iPXE boot image (undionly.kpxe) to /tftpboot. The binary might be found at:

Ubuntu:
    cp /usr/lib/ipxe/undionly.kpxe /tftpboot

Fedora/RHEL:
    cp /usr/share/ipxe/undionly.kpxe /tftpboot

Note: If the packaged version of the iPXE boot image doesn't work for you or you want to build one from source take a look at http://ipxe.org/download for more information on preparing iPXE image.

Enable/Configure iPXE in the Bare Metal Service's configuration file (/etc/ironic/ironic.conf):

[pxe]

# Enable iPXE boot. (boolean value)
ipxe_enabled=True

# Neutron bootfile DHCP parameter. (string value)
pxe_bootfile_name=undionly.kpxe

# Template file for PXE configuration. (string value)
pxe_config_template=$pybasedir/drivers/modules/ipxe_config.template

Restart the ironic-conductor process:
```
service ironic-conductor restart
```

IPMI support

If using the IPMITool driver, the ipmitool command must be present on the service node(s) where ironic-conductor is running. On most distros, this is provided as part of the ipmitool package. Source code is available at http://ipmitool.sourceforge.net/

Note that certain distros, notably Mac OS X and SLES, install openipmi instead of ipmitool by default. THIS DRIVER IS NOT COMPATIBLE WITH openipmi AS IT RELIES ON ERROR HANDLING OPTIONS NOT PROVIDED BY THIS TOOL.

Ironic supports sending IPMI sensor data to Ceilometer with pxe_ipmitool driver. By default, support for sending IPMI sensor data to Ceilometer is disabled. If you want to enable it set the following options in the conductor section of ironic.conf:

notification_driver=messaging
send_sensor_data=true

If you want to customize the sensor types which will be sent to Ceilometer, change the send_sensor_data_types option. For example, the below settings will send Temperature,Fan,Voltage these three sensor types data to Ceilometer:

send_sensor_data_types=Temperature,Fan,Voltage

Else we use default value 'All' for all the sensor types which supported by Ceilometer, they are:

Temperature,Fan,Voltage,Current

On Fedora/RHEL the syslinux-tftpboot package already install the library modules and PXE image at /tftpboot. If the TFTP server is configured to listen to a different directory you should copy the contents of /tftpboot to the configured directory↩︎
http://www.syslinux.org/wiki/index.php/Library_modules ↩︎
On Fedora/RHEL the syslinux-tftpboot package already install the library modules and PXE image at /tftpboot. If the TFTP server is configured to listen to a different directory you should copy the contents of /tftpboot to the configured directory↩︎

16 KiB Raw Blame History