bd2b0c2e0f
There was a typo in the command demonstrating how to change the IPMI protocol version (an extra "t" in the parameter's name). This patch is fixing that typo and making the command an one-liner to facilitate the copy and paste. Change-Id: I8a7bf5e51eb545944cdb7343c9263b75cc358dd1
166 lines
5.8 KiB
ReStructuredText
166 lines
5.8 KiB
ReStructuredText
.. _IPMITOOL:
|
|
|
|
===============
|
|
IPMITool driver
|
|
===============
|
|
|
|
Overview
|
|
========
|
|
|
|
The IPMITool driver enables managing nodes by using the Intelligent
|
|
Platform Management Interface (IPMI) versions 2.0 or 1.5. The name of
|
|
the driver comes from the utility ``ipmitool`` which is an open-source
|
|
command-line interface (CLI) for controlling IPMI-enabled devices.
|
|
|
|
Currently there are 2 IPMITool drivers:
|
|
|
|
* ``agent_ipmitool``
|
|
* ``pxe_ipmitool``
|
|
|
|
Glossary
|
|
========
|
|
|
|
* IPMI - Intelligent Platform Management Interface.
|
|
* IPMB - Intelligent Platform Management Bus/Bridge.
|
|
* BMC - Baseboard Management Controller.
|
|
* RMCP - Remote Management Control Protocol.
|
|
|
|
Prerequisites
|
|
=============
|
|
|
|
* The `ipmitool utility <https://sourceforge.net/projects/ipmitool>`_
|
|
should be installed on the ironic conductor node. On most distros,
|
|
this is provided as part of the ``ipmitool`` package.
|
|
|
|
Enabling the IPMITool driver(s)
|
|
===============================
|
|
|
|
.. note::
|
|
The ``pxe_ipmitool`` driver is the default driver in Ironic, so if
|
|
no extra configuration is provided the driver will be enabled.
|
|
|
|
#. Add ``pxe_ipmitool`` and/or ``agent_ipmitool`` to the list of
|
|
``enabled_drivers`` in */etc/ironic/ironic.conf*. For example::
|
|
|
|
[DEFAULT]
|
|
...
|
|
enabled_drivers = pxe_ipmitool,agent_ipmitool
|
|
|
|
#. Restart the Ironic conductor service::
|
|
|
|
service ironic-conductor restart
|
|
|
|
Registering a node with the IPMItool driver
|
|
===========================================
|
|
|
|
Nodes configured to use the IPMItool drivers should have the ``driver``
|
|
property set to ``pxe_ipmitool`` or ``agent_ipmitool``.
|
|
|
|
The following configuration value is required and has to be added to
|
|
the node's ``driver_info`` field:
|
|
|
|
- ``ipmi_address``: The IP address or hostname of the BMC.
|
|
|
|
Other options may be needed to match the configuration of the BMC, the
|
|
following options are optional, but in most cases, it's considered a
|
|
good practice to have them set:
|
|
|
|
- ``ipmi_username``: The username to access the BMC; defaults to *NULL* user.
|
|
- ``ipmi_password``: The password to access the BMC; defaults to *NULL*.
|
|
- ``ipmi_port``: The remote IPMI RMCP port. By default ipmitool will
|
|
use the port *623*.
|
|
|
|
.. note::
|
|
It is highly recommend that you setup a username and password for
|
|
your BMC.
|
|
|
|
The ``ironic node-create`` command can be used to enroll a node with
|
|
the IPMITool driver. For example::
|
|
|
|
ironic node-create -d pxe_ipmitool -i ipmi_address=<address>
|
|
-i ipmi_username=<username> -i ipmi_password=<password>
|
|
|
|
Advanced configuration
|
|
======================
|
|
|
|
When a simple configuration such as providing the ``address``,
|
|
``username`` and ``password`` is not enough, the IPMItool driver contains
|
|
many other options that can be used to address special usages.
|
|
|
|
Single/Double bridging functionality
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
.. note::
|
|
A version of ``ipmitool`` higher or equal to 1.8.12 is required to use
|
|
the bridging functionality.
|
|
|
|
There are two different bridging functionalities supported by the
|
|
IPMITool driver: *single* bridge and *dual* bridge.
|
|
|
|
The following configuration values need to be added to the node's
|
|
``driver_info`` field so bridging can be used:
|
|
|
|
- ``ipmi_bridging``: The bridging type; default is *no*; other supported
|
|
values are *single* for single bridge or *dual* for double bridge.
|
|
- ``ipmi_local_address``: The local IPMB address for bridged requests.
|
|
Required only if ``ipmi_bridging`` is set to *single* or *dual*. This
|
|
configuration is optional, if not specified it will be auto discovered
|
|
by ipmitool.
|
|
- ``ipmi_target_address``: The destination address for bridged
|
|
requests. Required only if ``ipmi_bridging`` is set to *single* or *dual*.
|
|
- ``ipmi_target_channel``: The destination channel for bridged
|
|
requests. Required only if ``ipmi_bridging`` is set to *single* or *dual*.
|
|
|
|
Double bridge specific options:
|
|
|
|
- ``ipmi_transit_address``: The transit address for bridged
|
|
requests. Required only if ``ipmi_bridging`` is set to *dual*.
|
|
- ``ipmi_transit_channel``: The transit channel for bridged
|
|
requests. Required only if ``ipmi_bridging`` is set to *dual*.
|
|
|
|
|
|
The parameter ``ipmi_bridging`` should specify the type of bridging
|
|
required: *single* or *dual* to access the bare metal node. If the
|
|
parameter is not specified, the default value will be set to *no*.
|
|
|
|
The ``ironic node-update`` command can be used to set the required
|
|
bridging information to the Ironic node enrolled with the IPMItool
|
|
driver. For example:
|
|
|
|
* Single Bridging::
|
|
|
|
ironic node-update add <UUID or name> driver_info/ipmi_local_address=<address>
|
|
driver_info/ipmi_bridging=single driver_info/ipmi_target_channel=<channel>
|
|
driver_info/ipmi_target_address=<target address>
|
|
|
|
* Double Bridging::
|
|
|
|
ironic node-update add <UUID or name> driver_info/ipmi_local_address=<address>
|
|
driver_info/ipmi_bridging=dual driver_info/ipmi_transit_channel=<transit channel>
|
|
driver_info/ipmi_transit_address=<transit address> driver_info/ipmi_target_channel=<target channel>
|
|
driver_info/ipmi_target_address=<target address>
|
|
|
|
Changing the version of the IPMI protocol
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
The IPMItool driver works with the versions *2.0* and *1.5* of the
|
|
IPMI protocol. By default, the version *2.0* is used.
|
|
|
|
In order to change the IPMI protocol version in the bare metal node,
|
|
the following option needs to be set to the node's ``driver_info`` field:
|
|
|
|
- ``ipmi_protocol_version``: The version of the IPMI protocol; default
|
|
is *2.0*. Supported values are *1.5* or *2.0*.
|
|
|
|
The ``ironic node-update`` command can be used to set the desired
|
|
protocol version::
|
|
|
|
ironic node-update add <UUID or name> driver_info/ipmi_protocol_version=<version>
|
|
|
|
.. warning::
|
|
The version *1.5* of the IPMI protocol does not support encryption. So
|
|
it's very recommended that the version *2.0* is used.
|
|
|
|
.. TODO(lucasagomes): Write about privilege level
|
|
.. TODO(lucasagomes): Write about force boot device
|