Pierre Riteau 1ee19568b0 Add support for configuring Cumulus switches with NCLU

This extends the physical network configuration in Kayobe to configure
Cumulus physical switches using the nclu Ansible module.

Change-Id: I960027ead301c5793a0ada1959a23549a71bdbfb

2020-03-03 20:46:32 +00:00

2.4 KiB

Raw Blame History

NCLU Switch

This role configures Cumulus switches using the nclu Ansible module. It provides a fairly minimal abstraction of the configuration interface provided by the nclu module, allowing for application of arbitrary switch configuration options.

Requirements

The switches should be configured to allow SSH access.

Role Variables

nclu_switch_config is a list of NCLU commands to apply to the switch, and defaults to an empty list. Commands must be formatted without the net prefix, which is added by the nclu module before execution on the switch.

nclu_switch_interface_config contains interface configuration. It is a dict mapping switch interface names to configuration dicts. Interfaces can be switch physical interfaces, but also special interfaces such as bridges or bonds. Each dict may contain the following items:

description - a description to apply to the interface.
config - a list of per-interface configuration, each applied with a net add <type> <interface-name> prefix.
type - type of interface, e.g. bond or bridge. If this field is absent, the interface keyword is used.

Dependencies

None

Example Playbook

The following playbook configures hosts in the nclu-switches group. It applies global configuration to configure a BGP AS and add two EBGP neighbors using BGP Unnumbered, enables two host interfaces with jumbo frames, and attaches them to a traditional bridge called bridge1 configured with an IP address.

---
- name: Ensure Cumulus switches are configured with NCLU
  hosts: nclu-switches
  gather_facts: no
  roles:
    - role: nclu-switch
      nclu_switch_config:
        - "add bgp autonomous-system 65000"
        - "add bgp neighbor swp51 interface remote-as external"
        - "add bgp neighbor swp52 interface remote-as external"
      nclu_switch_interface_config:
        swp1:
          description: server1
          config:
            - "mtu 9000"
        swp2:
          description: server2
          config:
            - "mtu 9000"
        bridge1:
          type: bridge
          config:
            - "ip address 10.100.100.1/24"
            - "ports swp1"
            - "ports swp2"

Author Information

Pierre Riteau (pierre@stackhpc.com)

2.4 KiB Raw Blame History