kolla/doc/image-building.rst

Building Container Images

The kolla-build command is responsible for building Docker images.

Note

When developing Kolla it can be useful to build images using files located in a local copy of Kolla. Use the tools/build.py script instead of kolla-build command in all below instructions.

Generating kolla-build.conf

Install tox and generate the build configuration. The build configuration is designed to hold advanced customizations when building containers.

Create kolla-build.conf using the following steps.

pip install tox
tox -e genconfig

The location of the generated configuration file is etc/kolla/kolla-build.conf, it can also be copied to /etc/kolla. The default location is one of /etc/kolla/kolla-build.conf or etc/kolla/kolla-build.conf.

Guide

In general, images are built like this:

kolla-build

By default, the above command would build all images based on CentOS image.

The operator can change the base distro with the -b option:

kolla-build -b ubuntu

There are following distros available for building images:

• centos
• oraclelinux
• ubuntu

Warning

Fedora images are deprecated since Newton and will be removed in the future.

It is possible to build only a subset of images by specifying them on the command line:

kolla-build keystone

In this case, the build script builds all images whose name contains the keystone string along with their dependencies.

Multiple names may be specified on the command line:

kolla-build keystone nova

The set of images built can be defined as a profile in the profiles section of kolla-build.conf. Later, profile can be specified by --profile CLI argument or profile option in kolla-build.conf. Kolla provides some pre-defined profiles:

• infra infrastructure-related images
• main core OpenStack images
• aux auxiliary images such as trove, magnum, ironic
• default minimal set of images for a working deploy

For example, due to Magnum requires Heat, following profile can be add to profiles section in kolla-build.conf :

magnum = magnum,heat

These images can be built using command line :

kolla-build --profile magnum

Or put following line to DEFAULT section in kolla-build.conf :

profile = magnum

kolla-build uses kolla as default Docker namespace. This is controlled with the -n command line option. To push images to a Dockerhub repository named mykollarepo:

kolla-build -n mykollarepo --push

To push images to a local registry<deploy_a_registry>, use --registry flag:

kolla-build --registry 172.22.2.81:5000 --push

The build configuration can be customized using a config file, the default location being one of /etc/kolla/kolla-build.conf or etc/kolla/kolla-build.conf. This file can be generated using the following command:

tox -e genconfig

Build OpenStack from source

When building images, there are two methods of the OpenStack install. One is binary. Another is source. The binary means that OpenStack will be installed from apt/yum. And the source means that OpenStack will be installed from source code. The default method of the OpenStack install is binary. It can be changed to source using the -t option:

kolla-build -t source

The locations of OpenStack source code are written in etc/kolla/kolla-build.conf. Now the source type supports url, git, and local. The location of the local source type can point to either a directory containing the source code or to a tarball of the source. The local source type permits to make the best use of the Docker cache.

etc/kolla/kolla-build.conf looks like:

[glance-base]
type = url
location = http://tarballs.openstack.org/glance/glance-master.tar.gz

[keystone]
type = git
location = https://git.openstack.org/openstack/keystone
reference = stable/mitaka

[heat-base]
type = local
location = /home/kolla/src/heat

[ironic-base]
type = local
location = /tmp/ironic.tar.gz

To build RHEL containers, it is necessary to include registration with RHN of the container runtime operating system. To obtain a RHN username/password/pool id, contact Red Hat. Use a template's header block overrides file, add the following:

RUN subscription-manager register --user=<user-name> \
--password=<password> && subscription-manager attach --pool <pool-id>

Dockerfile Customisation

As of the Newton release, the kolla-build tool provides a Jinja2 based mechanism which allows operators to customise the Dockerfiles used to generate Kolla images.

This offers a lot of flexibility on how images are built, e.g. installing extra packages as part of the build, tweaking settings, installing plugins, and numerous other capabilities. Some of these examples are described in more detail below.

Generic Customisation

Anywhere the line {% block ... %} appears may be modified. The Kolla community have added blocks throughout the Dockerfiles where we think they will be useful, however, operators are free to submit more if the ones provided are inadequate.

The following is an example of how an operator would modify the setup steps within the Horizon Dockerfile.

First, create a file to contain the customisations, e.g. template-overrides.j2. In this place the following:

{% extends parent_template %}

# Horizon
{% block horizon_redhat_binary_setup %}
RUN useradd --user-group myuser
{% endblock %}

Then rebuild the horizon image, passing the --template-override argument:

kolla-build --template-override template-overrides.j2 horizon

Note

The above example will replace all contents from the original block. Hence in many cases one may want to copy the original contents of the block before making changes.

More specific functionality such as removing/appending entries is available for packages, described in the next section.

Package Customisation

Packages installed as part of a container build can be overridden, appended to, and deleted. Taking the Horizon example, the following packages are installed as part of a binary install type build:

• openstack-dashboard
• httpd
• mod_wsgi
• mod_ssl
• gettext

To add a package to this list, say, iproute, first create a file, e.g. template-overrides.j2. In this place the following:

{% extends parent_template %}

# Horizon
{% set horizon_packages_append = ['iproute'] %}

Then rebuild the horizon image, passing the --template-override argument:

kolla-build --template-override template-overrides.j2 horizon

Alternatively template_override can be set in kolla-build.conf.

The append suffix in the above example carries special significance. It indicates the operation taken on the package list. The following is a complete list of operations available:

override

Replace the default packages with a custom list.

append

Add a package to the default list.

remove

Remove a package from the default list.

Using a different base image

Base-image can be specified by argument --base-image. For example:

kolla-build --base-image registry.access.redhat.com/rhel7/rhel --base rhel

Plugin Functionality

The Dockerfile customisation mechanism is also useful for adding/installing plugins to services. An example of this is Neutron's third party L2 drivers.

The bottom of each Dockerfile contains two blocks, image_name_footer, and footer. The image_name_footer is intended for image specific modifications, while the footer can be used to apply a common set of modifications to every Dockerfile.

For example, to add the networking-cisco plugin to the neutron_server image, add the following to the template-override file:

{% extends parent_template %}

{% block neutron_server_footer %}
RUN git clone https://git.openstack.org/openstack/networking-cisco \
    && pip --no-cache-dir install networking-cisco
{% endblock %}

Astute readers may notice there is one problem with this however. Assuming nothing else in the Dockerfile changes for a period of time, the above RUN statement will be cached by Docker, meaning new commits added to the Git repository may be missed on subsequent builds. To solve this the Kolla build tool also supports cloning additional repositories at build time, which will be automatically made available to the build, within an archive named plugins-archive.

Note

The following is available for source build types only.

To use this, add a section to /etc/kolla/kolla-build.conf in the following format:

[<image>-plugin-<plugin-name>]

Where <image> is the image that the plugin should be installed into, and <plugin-name> is the chosen plugin identifier.

Continuing with the above example, add the following to /etc/kolla/kolla-build.conf:

[neutron-server-plugin-networking-cisco]
type = git
location = https://git.openstack.org/openstack/networking-cisco
reference = master

The build will clone the repository, resulting in the following archive structure:

plugins-archive.tar
|__ plugins
    |__networking-cisco

The template now becomes:

{% block neutron_server_footer %}
ADD plugins-archive /
pip --no-cache-dir install /plugins/*
{% endblock %}

Additions Functionality

The Dockerfile customisation mechanism is also useful for adding/installing additions into images. An example of this is adding your jenkins job build metadata (say formatted into a jenkins.json file) into the image.

The bottom of each Dockerfile contains two blocks, image_name_footer, and footer. The image_name_footer is intended for image specific modifications, while the footer can be used to apply a common set of modifications to every Dockerfile.

For example, to add the jenkins.json additions to the neutron_server image, add the following to the template-override file:

{% extends parent_template %}

{% block neutron_server_footer %}
RUN cp /additions/jenkins/jenkins.json /jenkins.json
{% endblock %}

Astute readers may notice there is one problem with this however. Assuming nothing else in the Dockerfile changes for a period of time, the above RUN statement will be cached by Docker, meaning new commits added to the Git repository may be missed on subsequent builds. To solve this the Kolla build tool also supports cloning additional repositories at build time, which will be automatically made available to the build, within an archive named additions-archive.

Note

The following is available for source build types only.

To use this, add a section to /etc/kolla/kolla-build.conf in the following format:

[<image>-additions-<additions-name>]

Where <image> is the image that the plugin should be installed into, and <additions-name> is the chosen additions identifier.

Continuing with the above example, add the following to /etc/kolla/kolla-build.conf:

[neutron-server-jenkins]
type = local
location = /path/to/your/jenkins/data

The build will copy the directory, resulting in the following archive structure:

additions-archive.tar
|__ additions
    |__jenkins

The template now becomes:

{% block neutron_server_footer %}
ADD additions-archive /
RUN cp /additions/jenkins/jenkins.json /jenkins.json
{% endblock %}

Custom Repos

Red Hat

The build method allows the operator to build containers from custom repos. The repos are accepted as a list of comma separated values and can be in the form of .repo, .rpm, or a url. See examples below.

Update rpm_setup_config in /etc/kolla/kolla-build.conf:

rpm_setup_config = https://trunk.rdoproject.org/centos7/currrent/delorean.repo,https://trunk.rdoproject.org/centos7/delorean-deps.repo

If specifying a .repo file, each .repo file will need to exist in the same directory as the base Dockerfile (kolla/docker/base):

rpm_setup_config = epel.repo,delorean.repo,delorean-deps.repo

Ubuntu

For Debian based images, additional apt sources may be added to the build as follows:

apt_sources_list = custom.list

Known issues

1. Can't build base image because Docker fails to install systemd or httpd.

   There are some issues between Docker and AUFS. The simple workaround to avoid the issue is that add -s devicemapper or -s btrfs to DOCKER_OPTS. Get more information about the issue from the Docker bug tracker and how to configure Docker with BTRFS back end.

2. Mirrors are unreliable.

   Some of the mirrors Kolla uses can be unreliable. As a result occasionally some containers fail to build. To rectify build problems, the build tool will automatically attempt three retries of a build operation if the first one fails. The retry count is modified with the --retries option.

Kolla-ansible with Local Registry

To make kolla-ansible pull images from a local registry, set "docker_registry" to "172.22.2.81:5000" in "/etc/kolla/globals.yml". Make sure Docker is allowed to pull images from insecure registry. See Docker Insecure Registry Config <deploy_a_registry>.

Building behind a proxy

We can insert http_proxy settings into the images to fetch packages during build, and then unset them at the end to avoid having them carry through to the environment of the final images. Note however, it's not possible to drop the info completely using this method; it will still be visible in the layers of the image.

To set the proxy settings, we can add this to the template's header block:

ENV http_proxy=https://evil.corp.proxy:80
ENV https_proxy=https://evil.corp.proxy:80

To unset the proxy settings, we can add this to the template's footer block:

ENV http_proxy=""
ENV https_proxy=""

Besides this configuration options, the script will automatically read these environment variables. If the host system proxy parameters match the ones going to be used, no other input parameters will be needed. These are the variables that will be picked up from the user env:

HTTP_PROXY, http_proxy, HTTPS_PROXY, https_proxy, FTP_PROXY,
ftp_proxy, NO_PROXY, no_proxy

Also these variables could be overwritten using --build-args, which have precedence.