Yuanbin.Chen 5b5d53319c Update doc title format

Change-Id: Idd06ad6fc05bddc6dc84ee0924645beac66db72e
Signed-off-by: Yuanbin.Chen <cybing4@gmail.com>

2018-03-01 14:27:13 +08:00

8.7 KiB

Raw Blame History

Kuryr Kubernetes Ingress integration design

Purpose

The purpose of this document is to present how Kubernetes Ingress controller is supported by the kuryr integration.

Overview

A Kubernetes Ingress¹ is used to give services externally-reachable URLs, load balance traffic, terminate SSL, offer name based virtual hosting, and more. Each Ingress consists of a name, service identifier, and (optionally) security configuration.

A Kubernetes Ingress Controller² is an entity that watches the apiserver's /ingress resources for updates. Its job is to satisfy requests for Ingresses.

Proposed Solution

The suggested solution is based on extension of the kuryr-kubernetes controller handlers functionality to support kubernetes Ingress resources. This extension should watch kubernetes Ingresses resources, and the Service/Endpoints that Ingress is pointing to. The Ingress and Service/Endpoints controller handlers are responsible for updating the L7 rules in a L7 router's database.

A L7 router is a logical entity responsible for L7 routing based on L7 rules database, when an HTTP packet hits the L7 router, the L7 router uses its rules database to determine the endpoint destination (based on the fields content in HTTP header, e.g: HOST_NAME). Kuryr will use neutron LBaaS L7 policy capability³ to perform the L7 routing task.

SW architecture:

The following scheme describes the SW modules that provides Ingress controller capability in Kuryr Kubernetes context:

The Ingress controller functionality will be composed of the following software modules:

L7 Router
Ingress Handler
Extension to Service/Endpoints Handler
L7 Router Driver

Each one of this modules is detailed described below.

Ingress resource creation

The kuryr-kubernetes controller will create the L7 router, and both Ingress and Service/Endpoints handlers should update the L7 rules database of the L7 router.

The next diagram illustrates creation of Ingress resource in kuryr-kubernetes ingress controller SW :

The L7 Router

In Kuryr context, a L7 router is actually an externally reachable loadbalancer with L7 capabilities. For achieving external connectivity the L7 router is attached to a floating IP (allocated from 'external_svc_subnet').

The following parameters should be configured in kuryr.conf file to enable L7 Router:

[neutron_defaults]
external_svc_subnet=external_subnet_id
l7_router_ip=<floating_ip> (e.g: 172.24.4.13)
[kubernetes]
enable_ingress = True

In case L7 router is enabled in kuryr.conf, the kuryr-kubernetes controller should create it only if it doesn't exist. The L7 Router should notify the Health Manager upon any failure that could lead to L7 Router's malfunctionality.

The DNS should be configured to point external traffic to L7 Router's FIP.

The next diagram illustrates data flow from external user to L7 router:

Ingress Handler

The Ingress Handler watches the apiserver's for updates to the Ingress resources and should satisfy requests for Ingresses. Each Ingress being translated to a L7 policy in L7 router, and the rules on the Ingress become L7 (URL) mapping rules in that L7 policy. The L7 policy is configured to forward the filtered traffic to a LBaaS Pool. The LBaaS pool represents an Service/Endpoints resource, and it's the Service/Endpoints handler responsibility to attach all the Service/Endpoints members to this pool. Since the Service/Endpoints resource is not aware of changes in Ingress objects pointing to it, the Ingress handler should trigger this notification, the notification will be implemented using annotation.

Service/Endpoints Handler

The Service/Endpoints handler should be extended to support the flows involving Ingress resources. The Service/Endpoints handler should add/delete all its members to/from the LBaaS pool mentioned above, in case an Ingress is pointing this Service/Endpoints as its destination.

The L7 router driver

The L7 router, Ingress handler and Service/Endpoints handler will call the L7 router driver services to create the L7 routing entities chain. The L7 router driver will rely on neutron LBaaS functionality.

Note: Neutron LBaaS L7 functions are implemented only for the OCTAVIA provider, in case L7 routing is required the Neutron LBaaS provider must be configured to be OCTAVIA.

A diagram describing both L7 router and user loadbalancer Neutron LBaaS entities is given below:

The blue components are created/released by the L7 router.
The green components are created/released by Ingress handler.
The red components are created/released by Service/Endpoints handler.

Use cases examples

This section describe in details the following scenarios:

Create Ingress, create Service/Endpoints.

Create Service/Endpoints, create Ingress, delete Ingress.

Create Ingress, create Service/Endpoints:
- Ingress is created under namespace 'mynamespace'
  - Ingress details :
```
apiVersion: extensions/v1beta1
kind: Ingress
metadata:
name: test
spec:
rules:
- host: www.example.com
    http:
    paths:
    - backend:
        serviceName: s1
        servicePort: 80
```
  - Since its the first Ingress pointing to this Service, the Ingress handler will create LBaaS pool (attached to L7 router)- named 'mynamespace_s1'.
  - The Ingress handler will create a L7 rule and L7 policy, the L7 policy direct its filtered traffic towards 'mynamespace_s1' pool.
- Service/Endpoints is created under namespace 'mynamespace'
  - name: s1
  - The Service/Endpoints handler will create user loadbalancer, listeners, pools and members.
  - The Service/Endpoints handler will check for pool named 'mynamespace_s1' and will add its members to this pool.
Create Service/Endpoints, create Ingress, delete Ingress:
- Service/Endpoints is created under namespace 'mynamespace'
  - name: s1
  - The Service/Endpoints handler will create user loadbalancer, listeners, pools and members.
  - Since no pool named 'mynamespace_s1' exist in L7 router, no operation is required.
- Ingress is created with same details as described in above yaml file.
  - Since its the first Ingress pointing to this Service, the Ingress handler will create LBaaS pool (attached to L7 router) named 'mynamespace_s1'.
  - The Ingress handler will create a L7 rule and L7 policy, the L7 policy configured to direct its filtered traffic towards 'mynamespace_s1' pool.
  - The last step from Ingress handler will be to notify (using annotation) s1 Service/Endpoints.
  - As a result to the Ingress notification, the Service/Endpoints handler will be called. The Service/Endpoints handler will update the members information attached to 'mynamespace_s1' pool.
- Ingress is deleted
  - Ingress handler will first delete L7 rule and L7 policy.
  - In case no other L7 policy is pointing 'mynamespace_s1', the Ingress handler will delete 'mynamespace_s1' pool's members and the pool itself. The last step from Ingress handler will be to notify s1 Service/Endpoints.
  - As a result to the Ingress handler notification, the Service/Endpoints handler will set its internal state to 'no Ingress is pointing' state.

8.7 KiB Raw Blame History