magnum/doc/source/user/index.rst
Jake Yip 0b9a4f9783 Add tests for Kubernetes v1.28.9
Also update user documentation

Change-Id: I59c3c98fdef93b2c4fc0f867b2f9c200b23ab705
2024-07-24 19:17:16 +10:00

127 KiB

Magnum User Guide

This guide is intended for users who use Magnum to deploy and manage clusters of hosts for a Container Orchestration Engine. It describes the infrastructure that Magnum creates and how to work with them.

Section 1-3 describe Magnum itself, including an overview, the CLI and Horizon interface. Section 4-9 describe the Container Orchestration Engine (COE) supported along with a guide on how to select one that best meets your needs and how to develop a driver for a new COE. Section 10-15 describe the low level OpenStack infrastructure that is created and managed by Magnum to support the COE's.

  1. Overview
  2. Python Client
  3. Horizon Interface
  4. Cluster Drivers
  5. Heat Stack Templates
  6. Choosing a COE
  7. Native Clients
  8. Kubernetes
  9. Transport Layer Security
  10. Networking
  11. High Availability
  12. Scaling
  13. Storage
  14. Image Management
  15. Notification
  16. Container Monitoring
  17. Kubernetes Post Install Manifest
  18. Kubernetes External Load Balancer
  19. Keystone Authentication and Authorization for Kubernetes
  20. Node Groups
  21. Kubernetes Health Monitoring

Overview

Magnum is an OpenStack API service developed by the OpenStack Containers Team making container orchestration engines (COE) such as Kubernetes available as first class resources in OpenStack.

Magnum uses Heat to orchestrate an OS image which contains Docker and COE and runs that image in either virtual machines or bare metal in a cluster configuration.

Magnum offers complete life-cycle management of COEs in an OpenStack environment, integrated with other OpenStack services for a seamless experience for OpenStack users who wish to run containers in an OpenStack environment.

Following are few salient features of Magnum:

  • Standard API based complete life-cycle management for Container Clusters
  • Multi-tenancy for container clusters
  • Choice of COE: Kubernetes
  • Choice of container cluster deployment model: VM or Bare-metal
  • Keystone-based multi-tenant security and auth management
  • Neutron based multi-tenant network control and isolation
  • Cinder based volume service for containers
  • Integrated with OpenStack: SSO experience for cloud users
  • Secure container cluster access (TLS enabled)

ClusterTemplate

A ClusterTemplate (previously known as BayModel) is a collection of parameters to describe how a cluster can be constructed. Some parameters are relevant to the infrastructure of the cluster, while others are for the particular COE. In a typical workflow, a user would create a ClusterTemplate, then create one or more clusters using the ClusterTemplate. A cloud provider can also define a number of ClusterTemplates and provide them to the users. A ClusterTemplate cannot be updated or deleted if a cluster using this ClusterTemplate still exists.

The definition and usage of the parameters of a ClusterTemplate are as follows. They are loosely grouped as: mandatory, infrastructure, COE specific.

<name>

Name of the ClusterTemplate to create. The name does not have to be unique. If multiple ClusterTemplates have the same name, you will need to use the UUID to select the ClusterTemplate when creating a cluster or updating, deleting a ClusterTemplate. If a name is not specified, a random name will be generated using a string and a number, for example "pi-13-model".

--coe <coe>

Specify the Container Orchestration Engine to use. Supported COE is 'kubernetes'. If your environment has additional cluster drivers installed, refer to the cluster driver documentation for the new COE names. This is a mandatory parameter and there is no default value.

--image <image>

The name or UUID of the base image in Glance to boot the servers for the cluster. The image must have the attribute 'os_distro' defined as appropriate for the cluster driver. For the currently supported images, the os_distro names are:

COE os_distro
Kubernetes fedora-coreos

This is a mandatory parameter and there is no default value. Note that the os_distro attribute is case sensitive.

--keypair <keypair>

The name of the SSH keypair to configure in the cluster servers for ssh access. You will need the key to be able to ssh to the servers in the cluster. The login name is specific to the cluster driver. If keypair is not provided in template it will be required at Cluster create. This value will be overridden by any keypair value that is provided during Cluster create.

--external-network <external-network>

The name or network ID of a Neutron network to provide connectivity to the external internet for the cluster. This network must be an external network, i.e. its attribute 'router:external' must be 'True'. The servers in the cluster will be connected to a private network and Magnum will create a router between this private network and the external network. This will allow the servers to download images, access discovery service, etc, and the containers to install packages, etc. In the opposite direction, floating IP's will be allocated from the external network to provide access from the external internet to servers and the container services hosted in the cluster. This is a mandatory parameter and there is no default value.

--public

Access to a ClusterTemplate is normally limited to the admin, owner or users within the same tenant as the owners. Setting this flag makes the ClusterTemplate public and accessible by other users. The default is not public.

--server-type <server-type>

The servers in the cluster can be VM or baremetal. This parameter selects the type of server to create for the cluster. The default is 'vm'. Possible values are 'vm', 'bm'.

--network-driver <network-driver>

The name of a network driver for providing the networks for the containers. Note that this is different and separate from the Neutron network for the cluster. The operation and networking model are specific to the particular driver; refer to the Networking section for more details. Supported network drivers and the default driver are:

COE Network-Driver Default
Kubernetes flannel, calico flannel

Note that the network driver name is case sensitive.

--volume-driver <volume-driver>

The name of a volume driver for managing the persistent storage for the containers. The functionality supported are specific to the driver. Supported volume drivers and the default driver are:

COE Volume-Driver Default
Kubernetes cinder No Driver

Note that the volume driver name is case sensitive.

--dns-nameserver <dns-nameserver>

The DNS nameserver for the servers and containers in the cluster to use. This is configured in the private Neutron network for the cluster. The default is '8.8.8.8'.

--flavor <flavor>

The nova flavor id for booting the node servers. The default is 'm1.small'. This value can be overridden at cluster creation.

--master-flavor <master-flavor>

The nova flavor id for booting the master or manager servers. The default is 'm1.small'. This value can be overridden at cluster creation.

--http-proxy <http-proxy>

The IP address for a proxy to use when direct http access from the servers to sites on the external internet is blocked. This may happen in certain countries or enterprises, and the proxy allows the servers and containers to access these sites. The format is a URL including a port number. The default is 'None'.

--https-proxy <https-proxy>

The IP address for a proxy to use when direct https access from the servers to sites on the external internet is blocked. This may happen in certain countries or enterprises, and the proxy allows the servers and containers to access these sites. The format is a URL including a port number. The default is 'None'.

--no-proxy <no-proxy>

When a proxy server is used, some sites should not go through the proxy and should be accessed normally. In this case, you can specify these sites as a comma separated list of IP's. The default is 'None'.

--docker-volume-size <docker-volume-size>

If specified, container images will be stored in a cinder volume of the specified size in GB. Each cluster node will have a volume attached of the above size. If not specified, images will be stored in the compute instance's local disk. For the 'devicemapper' storage driver, must specify volume and the minimum value is 3GB. For the 'overlay' and 'overlay2' storage driver, the minimum value is 1GB or None(no volume). This value can be overridden at cluster creation.

--docker-storage-driver <docker-storage-driver>

The name of a driver to manage the storage for the images and the container's writable layer. The default is 'devicemapper'.

--labels <KEY1=VALUE1,KEY2=VALUE2;KEY3=VALUE3...>

Arbitrary labels in the form of key=value pairs. The accepted keys and valid values are defined in the cluster drivers. They are used as a way to pass additional parameters that are specific to a cluster driver. Refer to the subsection on labels for a list of the supported key/value pairs and their usage. The value can be overridden at cluster creation.

--tls-disabled

Transport Layer Security (TLS) is normally enabled to secure the cluster. In some cases, users may want to disable TLS in the cluster, for instance during development or to troubleshoot certain problems. Specifying this parameter will disable TLS so that users can access the COE endpoints without a certificate. The default is TLS enabled.

--registry-enabled

Docker images by default are pulled from the public Docker registry, but in some cases, users may want to use a private registry. This option provides an alternative registry based on the Registry V2: Magnum will create a local registry in the cluster backed by swift to host the images. Refer to Docker Registry 2.0 for more details. The default is to use the public registry.

--master-lb-enabled

Since multiple masters may exist in a cluster, a load balancer is created to provide the API endpoint for the cluster and to direct requests to the masters. In some cases, such as when the LBaaS service is not available, this option can be set to 'false' to create a cluster without the load balancer. In this case, one of the masters will serve as the API endpoint. The default is 'true', i.e. to create the load balancer for the cluster.

Labels

Labels is a general method to specify supplemental parameters that are specific to certain COE or associated with certain options. Their format is key/value pair and their meaning is interpreted by the drivers that uses them. The drivers do validate the key/value pairs. Their usage is explained in details in the appropriate sections, however, since there are many possible labels, the following table provides a summary to help give a clearer picture. The label keys in the table are linked to more details elsewhere in the user guide.

label key label value default
flannel_network_cidr IPv4 CIDR 10.100.0.0/16
flannel_backend
  • udp
  • vxlan
  • host-gw
vxlan
flannel_network_subnetlen size of subnet to assign to node 24
heapster_enabled
  • true
  • false
false
metrics_server_chart_tag see below see below
metrics_server_enabled
  • true
  • false
true
monitoring_enabled
  • true
  • false
false
monitoring_retention_days see below see below
monitoring_retention_size see below see below
monitoring_storage_class_name see below see below
monitoring_interval_seconds see below see below
monitoring_ingress_enabled
  • true
  • false
false
cluster_basic_auth_secret see below see below
cluster_root_domain_name see below see below
prometheus_operator_chart_tag see below see below
prometheus_adapter_enabled
  • true
  • false
true
prometheus_adapter_chart_tag see below see below
prometheus_adapter_configmap (rules CM name) ""
traefik_ingress_controller_tag see below see below
admission_control_list see below see below
prometheus_monitoring (deprecated)
  • true
  • false
false
grafana_admin_passwd (any string) "admin"
hyperkube_prefix see below see below
kube_tag see below see below
cloud_provider_tag see below see below
etcd_tag see below see below
coredns_tag see below see below
flannel_tag see below see below
flannel_cni_tag see below see below
heat_container_agent_tag see below see below
kube_dashboard_enabled
  • true
  • false
true
kube_dashboard_version see below see below
metrics_scraper_tag see below see below
influx_grafana_dashboard_enabled
  • true
  • false
false
docker_volume_type see below see below
boot_volume_size see below see below
boot_volume_type see below see below
etcd_volume_size etcd storage volume size 0
etcd_volume_type see below see below
container_infra_prefix see below ""
availability_zone AZ for the cluster nodes ""
cert_manager_api see below false
ingress_controller see below ""
ingress_controller_role see below "ingress"
octavia_ingress_controller_tag see below see below
nginx_ingress_controller_tag see below see below
nginx_ingress_controller_chart_tag see below see below
kubelet_options extra kubelet args ""
kubeapi_options extra kubeapi args ""
kubescheduler_options extra kubescheduler args ""
kubecontroller_options extra kubecontroller args ""
kubeproxy_options extra kubeproxy args ""
cgroup_driver
  • systemd
  • cgroupfs
"cgroupfs"
cloud_provider_enabled
  • true
  • false
see below
service_cluster_ip_range IPv4 CIDR for k8s service portals 10.254.0.0/16
keystone_auth_enabled see below true
k8s_keystone_auth_tag see below see below
helm_client_url see below see below
helm_client_sha256 see below see below
helm_client_tag see below see below
master_lb_floating_ip_enabled
  • true
  • false
see below
master_lb_allowed_cidrs see below ""
auto_healing_enabled
  • true
  • false
false
auto_healing_controller see below "draino"
magnum_auto_healer_tag see below see below
auto_scaling_enabled
  • true
  • false
false
node_problem_detector_tag see below see below
draino_tag see below see below
autoscaler_tag see below see below
min_node_count see below see below
max_node_count see below see below
npd_enabled
  • true
  • false
true
use_podman
  • true
  • false
see below
selinux_mode
  • enforcing
  • permissive
  • disabled
see below
container_runtime
  • ""
  • containerd
""
containerd_version see below see below
containerd_tarball_url see below see below
containerd_tarball_sha256 see below see below
calico_tag see below see below
calico_ipv4pool see below 10.100.0.0/16
calico_ipv4pool_ipip see below Off
fixed_subnet_cidr see below ""
octavia_provider see below amphora
octavia_lb_algorithm see bellow ROUND_ROBIN
octavia_lb_healthcheck see bellow true

Cluster

A cluster is an instance of the ClusterTemplate of a COE. Magnum deploys a cluster by referring to the attributes defined in the particular ClusterTemplate as well as a few additional parameters for the cluster. Magnum deploys the orchestration templates provided by the cluster driver to create and configure all the necessary infrastructure. When ready, the cluster is a fully operational COE that can host containers.

Infrastructure

The infrastructure of the cluster consists of the resources provided by the various OpenStack services. Existing infrastructure, including infrastructure external to OpenStack, can also be used by the cluster, such as DNS, public network, public discovery service, Docker registry. The actual resources created depends on the COE type and the options specified; therefore you need to refer to the cluster driver documentation of the COE for specific details. For instance, the option '--master-lb-enabled' in the ClusterTemplate will cause a load balancer pool along with the health monitor and floating IP to be created. It is important to distinguish resources in the IaaS level from resources in the PaaS level. For instance, the infrastructure networking in OpenStack IaaS is different and separate from the container networking in Kubernetes PaaS.

Typical infrastructure includes the following.

Servers

The servers host the containers in the cluster and these servers can be VM or bare metal. VM's are provided by Nova. Since multiple VM's are hosted on a physical server, the VM's provide the isolation needed for containers between different tenants running on the same physical server. Bare metal servers are provided by Ironic and are used when peak performance with virtually no overhead is needed for the containers.

Identity

Keystone provides the authentication and authorization for managing the cluster infrastructure.

Network

Networking among the servers is provided by Neutron. Since COE currently are not multi-tenant, isolation for multi-tenancy on the networking level is done by using a private network for each cluster. As a result, containers belonging to one tenant will not be accessible to containers or servers of another tenant. Other networking resources may also be used, such as load balancer and routers. Networking among containers can be provided by Kuryr if needed.

Storage

Cinder provides the block storage that can be used to host the containers and as persistent storage for the containers.

Security

Barbican provides the storage of secrets such as certificates used for Transport Layer Security (TLS) within the cluster.

Life cycle

The set of life cycle operations on the cluster is one of the key value that Magnum provides, enabling clusters to be managed painlessly on OpenStack. The current operations are the basic CRUD operations, but more advanced operations are under discussion in the community and will be implemented as needed.

NOTE The OpenStack resources created for a cluster are fully accessible to the cluster owner. Care should be taken when modifying or reusing these resources to avoid impacting Magnum operations in unexpected manners. For instance, if you launch your own Nova instance on the cluster private network, Magnum would not be aware of this instance. Therefore, the cluster-delete operation will fail because Magnum would not delete the extra Nova instance and the private Neutron network cannot be removed while a Nova instance is still attached.

NOTE Currently Heat nested templates are used to create the resources; therefore if an error occurs, you can troubleshoot through Heat. For more help on Heat stack troubleshooting, refer to the magnum_troubleshooting_guide.

Create

The 'cluster-create' command deploys a cluster, for example:

openstack coe cluster create mycluster \
                  --cluster-template mytemplate \
                  --node-count 8 \
                  --master-count 3

The 'cluster-create' operation is asynchronous; therefore you can initiate another 'cluster-create' operation while the current cluster is being created. If the cluster fails to be created, the infrastructure created so far may be retained or deleted depending on the particular orchestration engine. As a common practice, a failed cluster is retained during development for troubleshooting, but they are automatically deleted in production. The current cluster drivers use Heat templates and the resources of a failed 'cluster-create' are retained.

The definition and usage of the parameters for 'cluster-create' are as follows:

<name>

Name of the cluster to create. If a name is not specified, a random name will be generated using a string and a number, for example "gamma-7-cluster".

--cluster-template <cluster-template>

The ID or name of the ClusterTemplate to use. This is a mandatory parameter. Once a ClusterTemplate is used to create a cluster, it cannot be deleted or modified until all clusters that use the ClusterTemplate have been deleted.

--keypair <keypair>

The name of the SSH keypair to configure in the cluster servers for ssh access. You will need the key to be able to ssh to the servers in the cluster. The login name is specific to the cluster driver. If keypair is not provided it will attempt to use the value in the ClusterTemplate. If the ClusterTemplate is also missing a keypair value then an error will be returned. The keypair value provided here will override the keypair value from the ClusterTemplate.

--node-count <node-count>

The number of servers that will serve as node in the cluster. The default is 1.

--master-count <master-count>

The number of servers that will serve as master for the cluster. The default is 1. Set to more than 1 master to enable High Availability. If the option '--master-lb-enabled' is specified in the ClusterTemplate, the master servers will be placed in a load balancer pool.

--discovery-url <discovery-url>

The custom discovery url for node discovery. This is used by the COE to discover the servers that have been created to host the containers. The actual discovery mechanism varies with the COE. In some cases, Magnum fills in the server info in the discovery service. In other cases, if the discovery-url is not specified, Magnum will use the public discovery service at:

https://discovery.etcd.io

In this case, Magnum will generate a unique url here for each cluster and store the info for the servers.

--timeout <timeout>

The timeout for cluster creation in minutes. The value expected is a positive integer and the default is 60 minutes. If the timeout is reached during cluster-create, the operation will be aborted and the cluster status will be set to 'CREATE_FAILED'.

--master-lb-enabled

Indicates whether created clusters should have a load balancer for master nodes or not.

List

The 'cluster-list' command lists all the clusters that belong to the tenant, for example:

openstack coe cluster list

Show

The 'cluster-show' command prints all the details of a cluster, for example:

openstack coe cluster show mycluster

The properties include those not specified by users that have been assigned default values and properties from new resources that have been created for the cluster.

Update

A cluster can be modified using the 'cluster-update' command, for example:

openstack coe cluster update mycluster replace node_count=8

The parameters are positional and their definition and usage are as follows.

<cluster>

This is the first parameter, specifying the UUID or name of the cluster to update.

<op>

This is the second parameter, specifying the desired change to be made to the cluster attributes. The allowed changes are 'add', 'replace' and 'remove'.

<attribute=value>

This is the third parameter, specifying the targeted attributes in the cluster as a list separated by blank space. To add or replace an attribute, you need to specify the value for the attribute. To remove an attribute, you only need to specify the name of the attribute. Currently the only attribute that can be replaced or removed is 'node_count'. The attributes 'name', 'master_count' and 'discovery_url' cannot be replaced or delete. The table below summarizes the possible change to a cluster.

Attribute add replace remove
node_count no add/remove nodes in default-worker nodegroup. reset to default of 1
master_count no no

no

name no no

no

discovery_url no no

no

The 'cluster-update' operation cannot be initiated when another operation is in progress.

NOTE: The attribute names in cluster-update are slightly different from the corresponding names in the cluster-create command: the dash '-' is replaced by an underscore '_'. For instance, 'node-count' in cluster-create is 'node_count' in cluster-update.

Scale

Scaling a cluster means adding servers to or removing servers from the cluster. Currently, this is done through the 'cluster-update' operation by modifying the node-count attribute, for example:

openstack coe cluster update mycluster replace node_count=2

When some nodes are removed, Magnum will attempt to find nodes with no containers to remove. If some nodes with containers must be removed, Magnum will log a warning message.

Delete

The 'cluster-delete' operation removes the cluster by deleting all resources such as servers, network, storage; for example:

openstack coe cluster delete mycluster

The only parameter for the cluster-delete command is the ID or name of the cluster to delete. Multiple clusters can be specified, separated by a blank space.

If the operation fails, there may be some remaining resources that have not been deleted yet. In this case, you can troubleshoot through Heat. If the templates are deleted manually in Heat, you can delete the cluster in Magnum to clean up the cluster from Magnum database.

The 'cluster-delete' operation can be initiated when another operation is still in progress.

Python Client

Installation

Follow the instructions in the OpenStack Installation Guide to enable the repositories for your distribution:

Install using distribution packages for RHEL/CentOS/Fedora:

$ sudo yum install python-magnumclient

Install using distribution packages for Ubuntu/Debian:

$ sudo apt-get install python-magnumclient

Install using distribution packages for openSUSE and SUSE Enterprise Linux:

$ sudo zypper install python3-magnumclient

Verifying installation

Execute the openstack coe cluster list command to confirm that the client is installed and in the system path:

$ openstack coe cluster list

Using the command-line client

Refer to the OpenStack Command-Line Interface Reference for a full list of the commands supported by the openstack coe command-line client.

Horizon Interface

Magnum provides a Horizon plugin so that users can access the Container Infrastructure Management service through the OpenStack browser-based graphical UI. The plugin is available from magnum-ui. It is not installed by default in the standard Horizon service, but you can follow the instruction for installing a Horizon plugin.

In Horizon, the container infrastructure panel is part of the 'Project' view and it currently supports the following operations:

  • View list of cluster templates
  • View details of a cluster template
  • Create a cluster template
  • Delete a cluster template
  • View list of clusters
  • View details of a cluster
  • Create a cluster
  • Delete a cluster
  • Get the Certificate Authority for a cluster
  • Sign a user key and obtain a signed certificate for accessing the secured COE API endpoint in a cluster.

Other operations are not yet supported and the CLI should be used for these.

Following is the screenshot of the Horizon view showing the list of cluster templates.

image

Following is the screenshot of the Horizon view showing the details of a cluster template.

image

Following is the screenshot of the dialog to create a new cluster.

image

Cluster Drivers

A cluster driver is a collection of python code, heat templates, scripts, images, and documents for a particular COE on a particular distro. Magnum presents the concept of ClusterTemplates and clusters. The implementation for a particular cluster type is provided by the cluster driver. In other words, the cluster driver provisions and manages the infrastructure for the COE. Magnum includes default drivers for the following COE and distro pairs:

COE distro
Kubernetes Fedora CoreOS

Magnum is designed to accommodate new cluster drivers to support custom COE's and this section describes how a new cluster driver can be constructed and enabled in Magnum.

Directory structure

Magnum expects the components to be organized in the following directory structure under the directory 'drivers':

COE_Distro/
   image/
   templates/
   api.py
   driver.py
   monitor.py
   scale.py
   template_def.py
   version.py

The minimum required components are:

driver.py

Python code that implements the controller operations for the particular COE. The driver must implement: Currently supported: cluster_create, cluster_update, cluster_delete.

templates

A directory of orchestration templates for managing the lifecycle of clusters, including creation, configuration, update, and deletion. Currently only Heat templates are supported, but in the future other orchestration mechanism such as Ansible may be supported.

template_def.py

Python code that maps the parameters from the ClusterTemplate to the input parameters for the orchestration and invokes the orchestration in the templates directory.

version.py

Tracks the latest version of the driver in this directory. This is defined by a version attribute and is represented in the form of 1.0.0. It should also include a Driver attribute with descriptive name such as k8s_fedora_coreos.

The remaining components are optional:

image

Instructions for obtaining or building an image suitable for the COE.

api.py

Python code to interface with the COE.

monitor.py

Python code to monitor the resource utilization of the cluster.

scale.py

Python code to scale the cluster by adding or removing nodes.

Sample cluster driver

To help developers in creating new COE drivers, a minimal cluster driver is provided as an example. The 'docker' cluster driver will simply deploy a single VM running Ubuntu with the latest Docker version installed. It is not a true cluster, but the simplicity will help to illustrate the key concepts.

To be filled in

Installing a cluster driver

To be filled in

Heat Stack Templates

Choosing a COE

Choosing which COE to use depends on what tools you want to use to manage your containers once you start your app.

Kubernetes offers an attractive YAML file description of a pod, which is a grouping of containers that run together as part of a distributed application. This file format allows you to model your application deployment using a declarative style. It has support for auto scaling and fault recovery, as well as features that allow for sophisticated software deployments, including canary deploys and blue/green deploys. Kubernetes is very popular, especially for web applications.

Finding the right COE for your workload is up to you, but Magnum offers you a choice to select among the prevailing leading options. Once you decide, see the next sections for examples of how to create a cluster with your desired COE.

Native Clients

Magnum preserves the native user experience with a COE and does not provide a separate API or client. This means you will need to use the native client for the particular cluster type to interface with the clusters. In the typical case, there are two clients to consider:

COE level

This is the orchestration or management level such as Kubernetes its frameworks.

Container level

This is the low level container operation. Currently it is Docker for all clusters.

The clients can be CLI and/or browser-based. You will need to refer to the documentation for the specific native client and appropriate version for details, but following are some pointers for reference.

Kubernetes CLI is the tool 'kubectl', which can be simply copied from a node in the cluster or downloaded from the Kubernetes release. For instance, if the cluster is running Kubernetes release 1.2.0, the binary for 'kubectl' can be downloaded as and set up locally as follows:

curl -O https://storage.googleapis.com/kubernetes-release/release/v1.2.0/bin/linux/amd64/kubectl
chmod +x kubectl
sudo mv kubectl /usr/local/bin/kubectl

Kubernetes also provides a browser UI. If the cluster has the Kubernetes Dashboard running; it can be accessed using:

eval $(openstack coe cluster config <cluster-name>)
kubectl proxy

The browser can be accessed at http://localhost:8001/ui

Depending on the client requirement, you may need to use a version of the client that matches the version in the cluster. To determine the version of the COE and container, use the command 'cluster-show' and look for the attribute coe_version and container_version:

openstack coe cluster show k8s-cluster
+--------------------+------------------------------------------------------------+
| Property           | Value                                                      |
+--------------------+------------------------------------------------------------+
| status             | CREATE_COMPLETE                                            |
| uuid               | 04952c60-a338-437f-a7e7-d016d1d00e65                       |
| stack_id           | b7bf72ce-b08e-4768-8201-e63a99346898                       |
| status_reason      | Stack CREATE completed successfully                        |
| created_at         | 2016-07-25T23:14:06+00:00                                  |
| updated_at         | 2016-07-25T23:14:10+00:00                                  |
| create_timeout     | 60                                                         |
| coe_version        | v1.2.0                                                     |
| api_address        | https://192.168.19.86:6443                                 |
| cluster_template_id| da2825a0-6d09-4208-b39e-b2db666f1118                       |
| master_addresses   | ['192.168.19.87']                                          |
| node_count         | 1                                                          |
| node_addresses     | ['192.168.19.88']                                          |
| master_count       | 1                                                          |
| container_version  | 1.9.1                                                      |
| discovery_url      | https://discovery.etcd.io/3b7fb09733429d16679484673ba3bfd5 |
| name               | k8s-cluster                                                |
+--------------------+------------------------------------------------------------+

Kubernetes

Kubernetes uses a range of terminology that we refer to in this guide. We define these common terms in the Glossary for your reference.

When Magnum deploys a Kubernetes cluster, it uses parameters defined in the ClusterTemplate and specified on the cluster-create command, for example:

openstack coe cluster template create k8s-cluster-template \
                           --image fedora-coreos-latest \
                           --keypair testkey \
                           --external-network public \
                           --dns-nameserver 8.8.8.8 \
                           --flavor m1.small \
                           --docker-volume-size 5 \
                           --network-driver flannel \
                           --coe kubernetes

openstack coe cluster create k8s-cluster \
                      --cluster-template k8s-cluster-template \
                      --master-count 3 \
                      --node-count 8

Refer to the ClusterTemplate and Cluster sections for the full list of parameters. Following are further details relevant to a Kubernetes cluster:

Number of masters (master-count)

Specified in the cluster-create command to indicate how many servers will run as master in the cluster. Having more than one will provide high availability. The masters will be in a load balancer pool and the virtual IP address (VIP) of the load balancer will serve as the Kubernetes API endpoint. For external access, a floating IP associated with this VIP is available and this is the endpoint shown for Kubernetes in the 'cluster-show' command.

Number of nodes (node-count)

Specified in the cluster-create command to indicate how many servers will run as node in the cluster to host the users' pods. The nodes are registered in Kubernetes using the Nova instance name.

Network driver (network-driver)

Specified in the ClusterTemplate to select the network driver. The supported and default network driver is 'flannel', an overlay network providing a flat network for all pods. Refer to the Networking section for more details.

Volume driver (volume-driver)

Specified in the ClusterTemplate to select the volume driver. The supported volume driver is 'cinder', allowing Cinder volumes to be mounted in containers for use as persistent storage. Data written to these volumes will persist after the container exits and can be accessed again from other containers, while data written to the union file system hosting the container will be deleted. Refer to the Storage section for more details.

Storage driver (docker-storage-driver)

Specified in the ClusterTemplate to select the Docker storage driver. The default is 'devicemapper'. Refer to the Storage section for more details.

NOTE: For Fedora CoreOS driver, devicemapper is not supported.

Image (image)

Specified in the ClusterTemplate to indicate the image to boot the servers. The image binary is loaded in Glance with the attribute 'os_distro = fedora-coreos'. Current supported images is Fedora CoreOS (download from Fedora CoreOS )

TLS (tls-disabled)

Transport Layer Security is enabled by default, so you need a key and signed certificate to access the Kubernetes API and CLI. Magnum handles its own key and certificate when interfacing with the Kubernetes cluster. In development mode, TLS can be disabled. Refer to the 'Transport Layer Security'_ section for more details.

What runs on the servers

The servers for Kubernetes master host containers in the 'kube-system' name space to run the Kubernetes proxy, scheduler and controller manager. The masters will not host users' pods. Kubernetes API server, docker daemon, etcd and flannel run as systemd services. The servers for Kubernetes node also host a container in the 'kube-system' name space to run the Kubernetes proxy, while Kubernetes kubelet, docker daemon and flannel run as systemd services.

Log into the servers

You can log into the master servers using the login 'fedora' and the keypair specified in the ClusterTemplate.

In addition to the common attributes in the ClusterTemplate, you can specify the following attributes that are specific to Kubernetes by using the labels attribute.

_admission_control_list

This label corresponds to Kubernetes parameter for the API server '--admission-control'. For more details, refer to the Admission Controllers. The default value corresponds to the one recommended in this doc for our current Kubernetes version.

_boot_volume_size

This label overrides the default_boot_volume_size of instances which is useful if your flavors are boot from volume only. The default value is 0, meaning that cluster instances will not boot from volume.

_boot_volume_type

This label overrides the default_boot_volume_type of instances which is useful if your flavors are boot from volume only. The default value is '', meaning that Magnum will randomly select a Cinder volume type from all available options.

_etcd_volume_size

This label sets the size of a volume holding the etcd storage data. The default value is 0, meaning the etcd data is not persisted (no volume).

_etcd_volume_type

This label overrides the default_etcd_volume_type holding the etcd storage data. The default value is '', meaning that Magnum will randomly select a Cinder volume type from all available options.

_container_infra_prefix

Prefix of all container images used in the cluster (kubernetes components, coredns, kubernetes-dashboard, node-exporter). For example, kubernetes-apiserver is pulled from docker.io/openstackmagnum/kubernetes-apiserver, with this label it can be changed to myregistry.example.com/mycloud/kubernetes-apiserver. Similarly, all other components used in the cluster will be prefixed with this label, which assumes an operator has cloned all expected images in myregistry.example.com/mycloud.

Images that must be mirrored:

  • docker.io/coredns/coredns:1.3.1
  • quay.io/coreos/etcd:v3.4.6
  • docker.io/k8scloudprovider/k8s-keystone-auth:v1.18.0
  • docker.io/k8scloudprovider/openstack-cloud-controller-manager:v1.18.0
  • gcr.io/google_containers/pause:3.1

Images that might be needed when 'use_podman' is 'false':

  • docker.io/openstackmagnum/kubernetes-apiserver
  • docker.io/openstackmagnum/kubernetes-controller-manager
  • docker.io/openstackmagnum/kubernetes-kubelet
  • docker.io/openstackmagnum/kubernetes-proxy
  • docker.io/openstackmagnum/kubernetes-scheduler

Images that might be needed:

  • k8s.gcr.io/hyperkube:v1.18.2
  • docker.io/grafana/grafana:5.1.5
  • docker.io/prom/node-exporter:latest
  • docker.io/prom/prometheus:latest
  • docker.io/traefik:v1.7.28
  • gcr.io/google_containers/kubernetes-dashboard-amd64:v1.5.1
  • gcr.io/google_containers/metrics-server-amd64:v0.3.6
  • k8s.gcr.io/node-problem-detector:v0.6.2
  • docker.io/planetlabs/draino:abf028a
  • docker.io/openstackmagnum/cluster-autoscaler:v1.18.1
  • quay.io/calico/cni:v3.13.1
  • quay.io/calico/pod2daemon-flexvol:v3.13.1
  • quay.io/calico/kube-controllers:v3.13.1
  • quay.io/calico/node:v3.13.1
  • quay.io/coreos/flannel-cni:v0.3.0
  • quay.io/coreos/flannel:v0.12.0-amd64

Images that might be needed if 'monitoring_enabled' is 'true':

  • quay.io/prometheus/alertmanager:v0.20.0
  • docker.io/squareup/ghostunnel:v1.5.2
  • docker.io/jettech/kube-webhook-certgen:v1.0.0
  • quay.io/coreos/prometheus-operator:v0.37.0
  • quay.io/coreos/configmap-reload:v0.0.1
  • quay.io/coreos/prometheus-config-reloader:v0.37.0
  • quay.io/prometheus/prometheus:v2.15.2

Images that might be needed if 'cinder_csi_enabled' is 'true':

  • docker.io/k8scloudprovider/cinder-csi-plugin:v1.18.0
  • quay.io/k8scsi/csi-attacher:v2.0.0
  • quay.io/k8scsi/csi-provisioner:v1.4.0
  • quay.io/k8scsi/csi-snapshotter:v1.2.2
  • quay.io/k8scsi/csi-resizer:v0.3.0
  • quay.io/k8scsi/csi-node-driver-registrar:v1.1.0
_hyperkube_prefix

This label allows users to specify a custom prefix for Hyperkube container source since official Hyperkube images have been discontinued for kube_tag greater than 1.18.x. If you wish you use 1.19.x onwards, you may want to use unofficial sources like docker.io/rancher/, ghcr.io/openstackmagnum/ or your own container registry. If container_infra_prefix label is defined, it still takes precedence over this label. Default: docker.io/rancher/

_kube_tag

This label allows users to select a specific Kubernetes release based on its container tag for Fedora CoreOS image. If unset, the current Magnum version's default Kubernetes release is installed. Stein default: v1.11.6 Train default: v1.15.7 Ussuri default: v1.18.2 Victoria default: v1.18.16 Yoga default: v1.23.3-rancher1

_heapster_enabled

heapster_enabled is used to enable disable the installation of heapster. Ussuri default: false Train default: true

_cloud_provider_tag

This label allows users to override the default openstack-cloud-controller-manager container image tag. Refer to openstack-cloud-controller-manager page for available tags. Stein default: v0.2.0 Train default: v1.15.0 Ussuri default: v1.18.0

_etcd_tag

This label allows users to select a specific etcd version, based on its container tag. If unset, the current Magnum version's a default etcd version. Stein default: v3.2.7 Train default: 3.2.26 Ussuri default: v3.4.6

_coredns_tag

This label allows users to select a specific coredns version, based on its container tag. If unset, the current Magnum version's a default etcd version. Stein default: 1.3.1 Train default: 1.3.1 Ussuri default: 1.6.6

_flannel_tag

This label allows users to select a specific flannel version, based on its container tag:

  • =v0.15.1 <https://quay.io/repository/coreos/flannel?tab=tags
  • >=v0.20.2

If unset, the default version will be used.

_flannel_cni_tag

This label allows users to select a specific flannel_cni version, based on its container tag. This container adds the cni plugins in the host under /opt/cni/bin. If unset, the current Magnum version's a default flannel version. Stein default: v0.3.0 Train default: v0.3.0 Ussuri default: v0.3.0

_heat_container_agent_tag

This label allows users to select a specific heat_container_agent version, based on its container tag. Train-default: train-stable-3 Ussuri-default: ussuri-stable-1 Victoria-default: victoria-stable-1 Wallaby-default: wallaby-stable-1

_kube_dashboard_enabled

This label triggers the deployment of the kubernetes dashboard. The default value is 1, meaning it will be enabled.

_cert_manager_api

This label enables the kubernetes certificate manager api.

_kubelet_options

This label can hold any additional options to be passed to the kubelet. For more details, refer to the kubelet admin guide. By default no additional options are passed.

_kubeproxy_options

This label can hold any additional options to be passed to the kube proxy. For more details, refer to the kube proxy admin guide. By default no additional options are passed.

_kubecontroller_options

This label can hold any additional options to be passed to the kube controller manager. For more details, refer to the kube controller manager admin guide. By default no additional options are passed.

_kubeapi_options

This label can hold any additional options to be passed to the kube api server. For more details, refer to the kube api admin guide. By default no additional options are passed.

_kubescheduler_options

This label can hold any additional options to be passed to the kube scheduler. For more details, refer to the kube scheduler admin guide. By default no additional options are passed.

_influx_grafana_dashboard_enabled

The kubernetes dashboard comes with heapster enabled. If this label is set, an influxdb and grafana instance will be deployed, heapster will push data to influx and grafana will project them.

_cgroup_driver

This label tells kubelet which Cgroup driver to use. Ideally this should be identical to the Cgroup driver that Docker has been started with.

_cloud_provider_enabled

Add 'cloud_provider_enabled' label for the k8s_fedora_atomic driver. Defaults to the value of 'cluster_user_trust' (default: 'false' unless explicitly set to 'true' in magnum.conf due to CVE-2016-7404). Consequently, 'cloud_provider_enabled' label cannot be overridden to 'true' when 'cluster_user_trust' resolves to 'false'. For specific kubernetes versions, if 'cinder' is selected as a 'volume_driver', it is implied that the cloud provider will be enabled since they are combined.

_cinder_csi_enabled

When 'true', out-of-tree Cinder CSI driver will be enabled. Requires 'cinder' to be selected as a 'volume_driver' and consequently also requires label 'cloud_provider_enabled' to be 'true' (see 'cloud_provider_enabled' section). Ussuri default: false Victoria default: true

_cinder_csi_plugin_tag

This label allows users to override the default cinder-csi-plugin container image tag. Refer to cinder-csi-plugin page for available tags. Train default: v1.16.0 Ussuri default: v1.18.0 Yoga default: v1.23.0

_csi_attacher_tag

This label allows users to override the default container tag for CSI attacher. For additional tags, refer to CSI attacher page. Ussuri-default: v2.0.0 Yoga-default: v3.3.0

_csi_provisioner_tag

This label allows users to override the default container tag for CSI provisioner. For additional tags, refer to CSI provisioner page. Ussuri-default: v1.4.0 Yoga-default: v3.0.0

_csi_snapshotter_tag

This label allows users to override the default container tag for CSI snapshotter. For additional tags, refer to CSI snapshotter page. Ussuri-default: v1.2.2 Yoga-default: v4.2.1

_csi_resizer_tag

This label allows users to override the default container tag for CSI resizer. For additional tags, refer to CSI resizer page. Ussuri-default: v0.3.0 Yoga-default: v1.3.0

_csi_node_driver_registrar_tag

This label allows users to override the default container tag for CSI node driver registrar. For additional tags, refer to CSI node driver registrar page. Ussuri-default: v1.1.0 Yoga-default: v2.4.0

-csi_liveness_probe_tag

This label allows users to override the default container tag for CSI liveness probe. Yoga-default: v2.5.0

_keystone_auth_enabled

If this label is set to True, Kubernetes will support use Keystone for authorization and authentication.

_k8s_keystone_auth_tag

This label allows users to override the default k8s-keystone-auth container image tag. Refer to k8s-keystone-auth page for available tags. Stein default: v1.13.0 Train default: v1.14.0 Ussuri default: v1.18.0

_helm_client_url

URL of the helm client binary. Default: ''

_helm_client_sha256

SHA256 checksum of the helm client binary. Ussuri default: 018f9908cb950701a5d59e757653a790c66d8eda288625dbb185354ca6f41f6b

_helm_client_tag

This label allows users to override the default container tag for Helm client. For additional tags, refer to Helm client page. Ussuri default: v3.2.1

_master_lb_floating_ip_enabled

Controls if Magnum allocates floating IP for the load balancer of master nodes. This label only takes effect when the template property master_lb_enabled is set. If not specified, the default value is the same as template property floating_ip_enabled.

_master_lb_allowed_cidrs

A CIDR list which can be used to control the access for the load balancer of master nodes. The input format is comma delimited list. For example, 192.168.0.0/16,10.0.0.0/24. Default: "" (which opens to 0.0.0.0/0)

_auto_healing_enabled

If set to true, auto healing feature will be enabled. Defaults to false.

_auto_healing_controller

This label sets the auto-healing service to be used. Currently draino and magnum-auto-healer are supported. The default is draino. For more details, see draino doc and magnum-auto-healer doc.

_draino_tag

This label allows users to select a specific Draino version.

_magnum_auto_healer_tag

This label allows users to override the default magnum-auto-healer container image tag. Refer to magnum-auto-healer page for available tags. Stein default: v1.15.0 Train default: v1.15.0 Ussuri default: v1.18.0

_auto_scaling_enabled

If set to true, auto scaling feature will be enabled. Default: false.

_autoscaler_tag

This label allows users to override the default cluster-autoscaler container image tag. Refer to cluster-autoscaler page for available tags. Stein default: v1.0 Train default: v1.0 Ussuri default: v1.18.1

_npd_enabled

Set Node Problem Detector service enabled or disabled. Default: true

_node_problem_detector_tag

This label allows users to select a specific Node Problem Detector version.

_min_node_count

The minmium node count of the cluster when doing auto scaling or auto healing. Default: 1

_max_node_count

The maxmium node count of the cluster when doing auto scaling or auto healing.

_use_podman

Choose whether system containers etcd, kubernetes and the heat-agent will be installed with podman or atomic. This label is relevant for k8s_fedora drivers.

k8s_fedora_atomic_v1 defaults to use_podman=false, meaning atomic will be used pulling containers from docker.io/openstackmagnum. use_podman=true is accepted as well, which will pull containers by k8s.gcr.io.

k8s_fedora_coreos_v1 defaults and accepts only use_podman=true.

Note that, to use kubernetes version greater or equal to v1.16.0 with the k8s_fedora_atomic_v1 driver, you need to set use_podman=true. This is necessary since v1.16 dropped the --containerized flag in kubelet. https://github.com/kubernetes/kubernetes/pull/80043/files

_selinux_mode

Choose SELinux mode between enforcing, permissive and disabled. This label is currently only relevant for k8s_fedora drivers.

k8s_fedora_atomic_v1 driver defaults to selinux_mode=permissive because this was the only way atomic containers were able to start Kubernetes services. On the other hand, if the opt-in use_podman=true label is supplied, selinux_mode=enforcing is supported. Note that if selinux_mode=disabled is chosen, this only takes full effect once the instances are manually rebooted but they will be set to permissive mode in the meantime.

k8s_fedora_coreos_v1 driver defaults to selinux_mode=enforcing.

_container_runtime

The container runtime to use. Empty value means, use docker from the host. Since ussuri, apart from empty (host-docker), containerd is also an option.

_containerd_version

The containerd version to use as released in https://github.com/containerd/containerd/releases and https://storage.googleapis.com/cri-containerd-release/ Victoria default: 1.4.4 Ussuri default: 1.2.8

_containerd_tarball_url

Url with the tarball of containerd's binaries.

_containerd_tarball_sha256

sha256 of the tarball fetched with containerd_tarball_url or from https://github.com/containerd/containerd/releases.

_kube_dashboard_version

Default version of Kubernetes dashboard. Train default: v1.8.3 Ussuri default: v2.0.0

_metrics_scraper_tag

The version of metrics-scraper used by kubernetes dashboard. Ussuri default: v1.0.4

_fixed_subnet_cidr

CIDR of the fixed subnet created by Magnum when a user has not specified an existing fixed_subnet during cluster creation. Ussuri default: 10.0.0.0/24

_octavia_provider

Octavia provider driver to be used for creating load balancers.

_octavia_lb_algorithm

Octavia Octavia lb algorithm to use for LoadBalancer type service Default: ROUND_ROBIN

_octavia_lb_healthcheck

If true, enable Octavia load balancer healthcheck Default: true

Supported versions

The supported (tested) versions of Kubernetes and Operating Systems are:

Release kube_tag os distro and version
19.0.0 (Dalmatian) v1.28.9-rancher1 fedora-coreos-38.20230806.3.0
18.0.0 (Caracal) v1.27.8-rancher2 fedora-coreos-38.20230806.3.0
17.0.0 (Bobcat) v1.26.8-rancher1 fedora-coreos-38.20230806.3.0
16.0.0 (Antelope) v1.23.3-rancher1 fedora-coreos-35.20220116.3.0
15.0.0 (Zed) v1.23.3-rancher1 fedora-coreos-35.20220116.3.0
14.0.0 (Yoga) v1.23.3-rancher1 fedora-coreos-35.20220116.3.0
13.0.0 (Xena) v1.21.x fedora-coreos-31.20200323.3.2
12.0.0 (Wallaby) v1.21.x fedora-coreos-31.20200323.3.2
11.1.1 (Victoria) v1.21.x fedora-coreos-31.20200323.3.2

Note: It is important to try to use the exact image version tested. Sometimes Fedora updates packages within the same major version, so Magnum may not work if it is expecting different software versions. e.g.

  • fedora-coreos-35.20220116.3.0 - containerd 1.5
  • fedora-coreos-35.20220424.3.0 - containerd 1.6

Due to config file differences between containerd 1.5 and 1.6, a newer version of fcos 35 will not work without patches.

Supported labels

The tested labels for each release is as follow

  • Dalmatian

    kube_tag=v1.28.9-rancher1,container_runtime=containerd,containerd_version=1.6.31,containerd_tarball_sha256=75afb9b9674ff509ae670ef3ab944ffcdece8ea9f7d92c42307693efa7b6109d,cloud_provider_tag=v1.27.3,cinder_csi_plugin_tag=v1.27.3,k8s_keystone_auth_tag=v1.27.3,magnum_auto_healer_tag=v1.27.3,octavia_ingress_controller_tag=v1.27.3,calico_tag=v3.26.4

    kube_tag=v1.27.8-rancher2,container_runtime=containerd,containerd_version=1.6.31,containerd_tarball_sha256=75afb9b9674ff509ae670ef3ab944ffcdece8ea9f7d92c42307693efa7b6109d,cloud_provider_tag=v1.27.3,cinder_csi_plugin_tag=v1.27.3,k8s_keystone_auth_tag=v1.27.3,magnum_auto_healer_tag=v1.27.3,octavia_ingress_controller_tag=v1.27.3,calico_tag=v3.26.4

  • Caracal

    kube_tag=v1.27.8-rancher2,container_runtime=containerd,containerd_version=1.6.28,containerd_tarball_sha256=f70736e52d61e5ad225f4fd21643b5ca1220013ab8b6c380434caeefb572da9b,cloud_provider_tag=v1.27.3,cinder_csi_plugin_tag=v1.27.3,k8s_keystone_auth_tag=v1.27.3,magnum_auto_healer_tag=v1.27.3,octavia_ingress_controller_tag=v1.27.3,calico_tag=v3.26.4

  • Bobcat

    kube_tag=v1.25.9-rancher1,flannel_tag=v0.21.5,master_lb_floating_ip_enabled=true,cinder_csi_enabled=true,ingress_controller=octavia,container_runtime=containerd,containerd_version=1.6.20,containerd_tarball_sha256=1d86b534c7bba51b78a7eeb1b67dd2ac6c0edeb01c034cc5f590d5ccd824b416,cloud_provider_tag=v1.25.5,cinder_csi_plugin_tag=v1.25.5,k8s_keystone_auth_tag=v1.25.5,octavia_ingress_controller_tag=v1.25.5,coredns_tag=1.10.1,csi_snapshotter_tag=v6.2.1,csi_attacher_tag=v4.2.0,csi_resizer_tag=v1.7.0,csi_provisioner_tag=v3.4.1,csi_node_driver_registrar_tag=v2.8.0

    kube_tag=v1.26.8-rancher1,flannel_tag=v0.21.5,master_lb_floating_ip_enabled=true,cinder_csi_enabled=true,ingress_controller=octavia,container_runtime=containerd,containerd_version=1.6.20,containerd_tarball_sha256=1d86b534c7bba51b78a7eeb1b67dd2ac6c0edeb01c034cc5f590d5ccd824b416,cloud_provider_tag=v1.26.3,cinder_csi_plugin_tag=v1.26.3,k8s_keystone_auth_tag=v1.26.3,octavia_ingress_controller_tag=v1.26.3,coredns_tag=1.10.1,csi_snapshotter_tag=v6.2.1,csi_attacher_tag=v4.2.0,csi_resizer_tag=v1.7.0,csi_provisioner_tag=v3.4.1,csi_node_driver_registrar_tag=v2.8.0

  • Antelope

    kube_tag=v1.23.8-rancher1,flannel_tag=v0.18.1,master_lb_floating_ip_enabled=true,cinder_csi_enabled=true,ingress_controller=octavia,container_runtime=containerd,containerd_version=1.6.6,containerd_tarball_sha256=a64568c8ce792dd73859ce5f336d5485fcbceab15dc3e06d5d1bc1c3353fa20f,cloud_provider_tag=v1.23.4,cinder_csi_plugin_tag=v1.23.4,k8s_keystone_auth_tag=v1.23.4,magnum_auto_healer_tag=v1.23.4,octavia_ingress_controller_tag=v1.23.4,autoscaler_tag=v1.23.0,coredns_tag=1.9.3,csi_snapshotter_tag=v4.2.1,csi_attacher_tag=v3.3.0,csi_resizer_tag=v1.3.0,csi_provisioner_tag=v3.0.0,csi_node_driver_registrar_tag=v2.4.0

Images

The supported images can be downloaded from the following locations

External load balancer for services

All Kubernetes pods and services created in the cluster are assigned IP addresses on a private container network so they can access each other and the external internet. However, these IP addresses are not accessible from an external network.

To publish a service endpoint externally so that the service can be accessed from the external network, Kubernetes provides the external load balancer feature. This is done by simply specifying in the service manifest the attribute "type: LoadBalancer". Magnum enables and configures the Kubernetes plugin for OpenStack so that it can interface with Neutron and manage the necessary networking resources.

When the service is created, Kubernetes will add an external load balancer in front of the service so that the service will have an external IP address in addition to the internal IP address on the container network. The service endpoint can then be accessed with this external IP address. Kubernetes handles all the life cycle operations when pods are modified behind the service and when the service is deleted.

Refer to the Kubernetes External Load Balancer section for more details.

Ingress Controller

In addition to the LoadBalancer described above, Kubernetes can also be configured with an Ingress Controller. Ingress can provide load balancing, SSL termination and name-based virtual hosting.

Magnum allows selecting one of multiple controller options via the 'ingress_controller' label. Check the Kubernetes documentation to define your own Ingress resources.

Traefik: Traefik's pods by default expose port 80 and 443 for http(s) traffic on the nodes they are running. In kubernetes cluster, these ports are closed by default. Cluster administrator needs to add a rule in the worker nodes security group. For example:

openstack security group rule create <SECURITY_GROUP> \
  --protocol tcp \
  --dst-port 80:80
openstack security group rule create <SECURITY_GROUP> \
  --protocol tcp \
  --dst-port 443:443
_ingress_controller

This label sets the Ingress Controller to be used. Currently 'traefik', 'nginx' and 'octavia' are supported. The default is '', meaning no Ingress Controller is configured. For more details about octavia-ingress-controller please refer to cloud-provider-openstack document

_ingress_controller_role

This label defines the role nodes should have to run an instance of the Ingress Controller. This gives operators full control on which nodes should be running an instance of the controller, and should be set in multiple nodes for availability. Default is 'ingress'. An example of setting this in a Kubernetes node would be:

kubectl label node <node-name> role=ingress

This label is not used for octavia-ingress-controller.

_octavia_ingress_controller_tag

The image tag for octavia-ingress-controller. Train-default: v1.15.0

_nginx_ingress_controller_tag

The image tag for nginx-ingress-controller. Stein-default: 0.23.0 Train-default: 0.26.1 Ussuru-default: 0.26.1 Victoria-default: 0.32.0

_nginx_ingress_controller_chart_tag

The chart version for nginx-ingress-controller. Train-default: v1.24.7 Ussuru-default: v1.24.7 Victoria-default: v1.36.3

_traefik_ingress_controller_tag

The image tag for traefik_ingress_controller_tag. Stein-default: v1.7.10

DNS

CoreDNS is a critical service in Kubernetes cluster for service discovery. To get high availability for CoreDNS pod for Kubernetes cluster, now Magnum supports the autoscaling of CoreDNS using cluster-proportional-autoscaler. With cluster-proportional-autoscaler, the replicas of CoreDNS pod will be autoscaled based on the nodes and cores in the clsuter to prevent single point failure.

The scaling parameters and data points are provided via a ConfigMap to the autoscaler and it refreshes its parameters table every poll interval to be up to date with the latest desired scaling parameters. Using ConfigMap means user can do on-the-fly changes(including control mode) without rebuilding or restarting the scaler containers/pods. Please refer Autoscale the DNS Service in a Cluster for more info.

Keystone authN and authZ

Now cloud-provider-openstack provides a good webhook between OpenStack Keystone and Kubernetes, so that user can do authorization and authentication with a Keystone user/role against the Kubernetes cluster. If label keystone-auth-enabled is set True, then user can use their OpenStack credentials and roles to access resources in Kubernetes.

Assume you have already got the configs with command eval $(openstack coe cluster config <cluster ID>), then to configure the kubectl client, the following commands are needed:

  1. Run kubectl config set-credentials openstackuser --auth-provider=openstack
  2. Run kubectl config set-context --cluster=<your cluster name> --user=openstackuser openstackuser@kubernetes
  3. Run kubectl config use-context openstackuser@kubernetes to activate the context

NOTE: Please make sure the version of kubectl is 1.8+ and make sure OS_DOMAIN_NAME is included in the rc file.

Now try kubectl get pods, you should be able to see response from Kubernetes based on current user's role.

Please refer the doc of k8s-keystone-auth in cloud-provider-openstack for more information.

Transport Layer Security

Magnum uses TLS to secure communication between a cluster's services and the outside world. TLS is a complex subject, and many guides on it exist already. This guide will not attempt to fully describe TLS, but instead will only cover the necessary steps to get a client set up to talk to a cluster with TLS. A more in-depth guide on TLS can be found in the OpenSSL Cookbook by Ivan Ristić.

TLS is employed at 3 points in a cluster:

  1. By Magnum to communicate with the cluster API endpoint
  2. By the cluster worker nodes to communicate with the master nodes
  3. By the end-user when they use the native client libraries to interact with the cluster. This applies to both a CLI or a program that uses a client for the particular cluster. Each client needs a valid certificate to authenticate and communicate with a cluster.

The first two cases are implemented internally by Magnum and are not exposed to the users, while the last case involves the users and is described in more details below.

Deploying a secure cluster

Current TLS support is summarized below:

COE TLS support
Kubernetes yes

For cluster type with TLS support, e.g. Kubernetes, TLS is enabled by default. To disable TLS in Magnum, you can specify the parameter '--tls-disabled' in the ClusterTemplate. Please note it is not recommended to disable TLS due to security reasons.

In the following example, Kubernetes is used to illustrate a secure cluster, but the steps are similar for other cluster types that have TLS support.

First, create a ClusterTemplate; by default TLS is enabled in Magnum, therefore it does not need to be specified via a parameter:

openstack coe cluster template create secure-kubernetes \
                           --keypair default \
                           --external-network public \
                           --image fedora-coreos-latest \
                           --dns-nameserver 8.8.8.8 \
                           --flavor m1.small \
                           --docker-volume-size 3 \
                           --coe kubernetes \
                           --network-driver flannel

+-----------------------+--------------------------------------+
| Property              | Value                                |
+-----------------------+--------------------------------------+
| insecure_registry     | None                                 |
| http_proxy            | None                                 |
| updated_at            | None                                 |
| master_flavor_id      | None                                 |
| uuid                  | 5519b24a-621c-413c-832f-c30424528b31 |
| no_proxy              | None                                 |
| https_proxy           | None                                 |
| tls_disabled          | False                                |
| keypair_id            | time4funkey                          |
| public                | False                                |
| labels                | {}                                   |
| docker_volume_size    | 5                                    |
| server_type           | vm                                   |
| external_network_id   | public                               |
| cluster_distro        | fedora-coreos                        |
| image_id              | fedora-coreos-latest                 |
| volume_driver         | None                                 |
| registry_enabled      | False                                |
| docker_storage_driver | devicemapper                         |
| apiserver_port        | None                                 |
| name                  | secure-kubernetes                    |
| created_at            | 2016-07-25T23:09:50+00:00            |
| network_driver        | flannel                              |
| fixed_network         | None                                 |
| coe                   | kubernetes                           |
| flavor_id             | m1.small                             |
| dns_nameserver        | 8.8.8.8                              |
+-----------------------+--------------------------------------+

Now create a cluster. Use the ClusterTemplate name as a template for cluster creation:

openstack coe cluster create secure-k8s-cluster \
                      --cluster-template secure-kubernetes \
                      --node-count 1

+--------------------+------------------------------------------------------------+
| Property           | Value                                                      |
+--------------------+------------------------------------------------------------+
| status             | CREATE_IN_PROGRESS                                         |
| uuid               | 3968ffd5-678d-4555-9737-35f191340fda                       |
| stack_id           | c96b66dd-2109-4ae2-b510-b3428f1e8761                       |
| status_reason      | None                                                       |
| created_at         | 2016-07-25T23:14:06+00:00                                  |
| updated_at         | None                                                       |
| create_timeout     | 0                                                          |
| api_address        | None                                                       |
| coe_version        | -                                                          |
| cluster_template_id| 5519b24a-621c-413c-832f-c30424528b31                       |
| master_addresses   | None                                                       |
| node_count         | 1                                                          |
| node_addresses     | None                                                       |
| master_count       | 1                                                          |
| container_version  | -                                                          |
| discovery_url      | https://discovery.etcd.io/ba52a8178e7364d43a323ee4387cf28e |
| name               | secure-k8s-cluster                                          |
+--------------------+------------------------------------------------------------+

Now run cluster-show command to get the details of the cluster and verify that the api_address is 'https':

openstack coe cluster show secure-k8scluster
+--------------------+------------------------------------------------------------+
| Property           | Value                                                      |
+--------------------+------------------------------------------------------------+
| status             | CREATE_COMPLETE                                            |
| uuid               | 04952c60-a338-437f-a7e7-d016d1d00e65                       |
| stack_id           | b7bf72ce-b08e-4768-8201-e63a99346898                       |
| status_reason      | Stack CREATE completed successfully                        |
| created_at         | 2016-07-25T23:14:06+00:00                                  |
| updated_at         | 2016-07-25T23:14:10+00:00                                  |
| create_timeout     | 60                                                         |
| coe_version        | v1.2.0                                                     |
| api_address        | https://192.168.19.86:6443                                 |
| cluster_template_id| da2825a0-6d09-4208-b39e-b2db666f1118                       |
| master_addresses   | ['192.168.19.87']                                          |
| node_count         | 1                                                          |
| node_addresses     | ['192.168.19.88']                                          |
| master_count       | 1                                                          |
| container_version  | 1.9.1                                                      |
| discovery_url      | https://discovery.etcd.io/3b7fb09733429d16679484673ba3bfd5 |
| name               | secure-k8s-cluster                                          |
+--------------------+------------------------------------------------------------+

You can see the api_address contains https in the URL, showing that the Kubernetes services are configured securely with SSL certificates and now any communication to kube-apiserver will be over https.

Interfacing with a secure cluster

To communicate with the API endpoint of a secure cluster, you will need so supply 3 SSL artifacts:

  1. Your client key
  2. A certificate for your client key that has been signed by a Certificate Authority (CA)
  3. The certificate of the CA

There are two ways to obtain these 3 artifacts.

Automated

Magnum provides the command 'cluster-config' to help the user in setting up the environment and artifacts for TLS, for example:

openstack coe cluster config kubernetes-cluster --dir myclusterconfig

This will display the necessary environment variables, which you can add to your environment:

export DOCKER_HOST=tcp://172.24.4.5:2376
export DOCKER_CERT_PATH=myclusterconfig
export DOCKER_TLS_VERIFY=True

And the artifacts are placed in the directory specified:

ca.pem
cert.pem
key.pem

You can now use the native client to interact with the COE. The variables and artifacts are unique to the cluster.

The parameters for 'coe cluster config' are as follows:

--dir <dirname>

Directory to save the certificate and config files.

--force

Overwrite existing files in the directory specified.

Manual

You can create the key and certificates manually using the following steps.

Client Key

Your personal private key is essentially a cryptographically generated string of bytes. It should be protected in the same manner as a password. To generate an RSA key, you can use the 'genrsa' command of the 'openssl' tool:

openssl genrsa -out key.pem 4096

This command generates a 4096 byte RSA key at key.pem.

Signed Certificate

To authenticate your key, you need to have it signed by a CA. First generate the Certificate Signing Request (CSR). The CSR will be used by Magnum to generate a signed certificate that you will use to communicate with the cluster. To generate a CSR, openssl requires a config file that specifies a few values. Using the example template below, you can fill in the 'CN' value with your name and save it as client.conf:

$ cat > client.conf << END
[req]
distinguished_name = req_distinguished_name
req_extensions     = req_ext
prompt = no
[req_distinguished_name]
CN = Your Name
[req_ext]
extendedKeyUsage = clientAuth
END

For RBAC enabled kubernetes clusters you need to use the name admin and system:masters as Organization (O=):

$ cat > client.conf << END
[req]
distinguished_name = req_distinguished_name
req_extensions     = req_ext
prompt = no
[req_distinguished_name]
CN = admin
O = system:masters
OU=OpenStack/Magnum
C=US
ST=TX
L=Austin
[req_ext]
extendedKeyUsage = clientAuth
END

Once you have client.conf, you can run the openssl 'req' command to generate the CSR:

openssl req -new -days 365 \
    -config client.conf \
    -key key.pem \
    -out client.csr

Now that you have your client CSR, you can use the Magnum CLI to send it off to Magnum to get it signed:

openstack coe ca sign secure-k8s-cluster client.csr > cert.pem
Certificate Authority

The final artifact you need to retrieve is the CA certificate for the cluster. This is used by your native client to ensure you are only communicating with hosts that Magnum set up:

openstack coe ca show secure-k8s-cluster > ca.pem
Rotate Certificate

To rotate the CA certificate for a cluster and invalidate all user certificates, you can use the following command:

openstack coe ca rotate secure-k8s-cluster

Please note that now the CA rotate function is only supported by Fedora CoreOS driver.

User Examples

Here are some examples for using the CLI on a secure Kubernetes cluster. You can perform all the TLS set up automatically by:

eval $(openstack coe cluster config <cluster-name>)

Or you can perform the manual steps as described above and specify the TLS options on the CLI. The SSL artifacts are assumed to be saved in local files as follows:

- key.pem: your SSL key
- cert.pem: signed certificate
- ca.pem: certificate for cluster CA

For Kubernetes, you need to get 'kubectl', a kubernetes CLI tool, to communicate with the cluster:

curl -O https://storage.googleapis.com/kubernetes-release/release/v1.2.0/bin/linux/amd64/kubectl
chmod +x kubectl
sudo mv kubectl /usr/local/bin/kubectl

Now let's run some 'kubectl' commands to check the secure communication. If you used 'cluster-config', then you can simply run the 'kubectl' command without having to specify the TLS options since they have been defined in the environment:

kubectl version
Client Version: version.Info{Major:"1", Minor:"0", GitVersion:"v1.2.0", GitCommit:"cffae0523cfa80ddf917aba69f08508b91f603d5", GitTreeState:"clean"}
Server Version: version.Info{Major:"1", Minor:"0", GitVersion:"v1.2.0", GitCommit:"cffae0523cfa80ddf917aba69f08508b91f603d5", GitTreeState:"clean"}

You can specify the TLS options manually as follows:

KUBERNETES_URL=$(openstack coe cluster show secure-k8s-cluster |
                 awk '/ api_address /{print $4}')
kubectl version --certificate-authority=ca.pem \
                --client-key=key.pem \
                --client-certificate=cert.pem -s $KUBERNETES_URL

kubectl create -f redis-master.yaml --certificate-authority=ca.pem \
                                    --client-key=key.pem \
                                    --client-certificate=cert.pem -s $KUBERNETES_URL

pods/test2

kubectl get pods --certificate-authority=ca.pem \
                 --client-key=key.pem \
                 --client-certificate=cert.pem -s $KUBERNETES_URL
NAME           READY     STATUS    RESTARTS   AGE
redis-master   2/2       Running   0          1m

Beside using the environment variables, you can also configure 'kubectl' to remember the TLS options:

kubectl config set-cluster secure-k8s-cluster --server=${KUBERNETES_URL} \
    --certificate-authority=${PWD}/ca.pem
kubectl config set-credentials client --certificate-authority=${PWD}/ca.pem \
    --client-key=${PWD}/key.pem --client-certificate=${PWD}/cert.pem
kubectl config set-context secure-k8scluster --cluster=secure-k8scluster --user=client
kubectl config use-context secure-k8scluster

Then you can use 'kubectl' commands without the certificates:

kubectl get pods
NAME           READY     STATUS    RESTARTS   AGE
redis-master   2/2       Running   0          1m

Access to Kubernetes User Interface:

curl -L ${KUBERNETES_URL}/ui --cacert ca.pem --key key.pem \
    --cert cert.pem

You may also set up 'kubectl' proxy which will use your client certificates to allow you to browse to a local address to use the UI without installing a certificate in your browser:

kubectl proxy --api-prefix=/ --certificate-authority=ca.pem --client-key=key.pem \
              --client-certificate=cert.pem -s $KUBERNETES_URL

You can then open http://localhost:8001/ui in your browser.

The examples for Docker are similar. With 'cluster-config' set up, you can just run docker commands without TLS options. To specify the TLS options manually:

docker -H tcp://192.168.19.86:2376 --tlsverify \
       --tlscacert ca.pem \
       --tlskey key.pem \
       --tlscert cert.pem \
       info

Storing the certificates

Magnum generates and maintains a certificate for each cluster so that it can also communicate securely with the cluster. As a result, it is necessary to store the certificates in a secure manner. Magnum provides the following methods for storing the certificates and this is configured in /etc/magnum/magnum.conf in the section [certificates] with the parameter 'cert_manager_type'.

  1. Barbican: Barbican is a service in OpenStack for storing secrets. It is used by Magnum to store the certificates when cert_manager_type is configured as:

    cert_manager_type = barbican

    This is the recommended configuration for a production environment. Magnum will interface with Barbican to store and retrieve certificates, delegating the task of securing the certificates to Barbican.

  2. Magnum database: In some cases, a user may want an alternative to storing the certificates that does not require Barbican. This can be a development environment, or a private cloud that has been secured by other means. Magnum can store the certificates in its own database; this is done with the configuration:

    cert_manager_type = x509keypair

    This storage mode is only as secure as the controller server that hosts the database for the OpenStack services.

  3. Local store: As another alternative that does not require Barbican, Magnum can simply store the certificates on the local host filesystem where the conductor is running, using the configuration:

    cert_manager_type = local

    Note that this mode is only supported when there is a single Magnum conductor running since the certificates are stored locally. The 'local' mode is not recommended for a production environment.

For the nodes, the certificates for communicating with the masters are stored locally and the nodes are assumed to be secured.

Networking

There are two components that make up the networking in a cluster.

  1. The Neutron infrastructure for the cluster: this includes the private network, subnet, ports, routers, load balancers, etc.
  2. The networking model presented to the containers: this is what the containers see in communicating with each other and to the external world. Typically this consists of a driver deployed on each node.

The two components are deployed and managed separately. The Neutron infrastructure is the integration with OpenStack; therefore, it is stable and more or less similar across different COE types. The networking model, on the other hand, is specific to the COE type and is still under active development in the various COE communities, for example, Docker libnetwork and Kubernetes Container Networking. As a result, the implementation for the networking models is evolving and new models are likely to be introduced in the future.

For the Neutron infrastructure, the following configuration can be set in the ClusterTemplate:

external-network

The external Neutron network ID to connect to this cluster. This is used to connect the cluster to the external internet, allowing the nodes in the cluster to access external URL for discovery, image download, etc. If not specified, the default value is "public" and this is valid for a typical devstack.

fixed-network

The Neutron network to use as the private network for the cluster nodes. If not specified, a new Neutron private network will be created.

dns-nameserver

The DNS nameserver to use for this cluster. This is an IP address for the server and it is used to configure the Neutron subnet of the cluster (dns_nameservers). If not specified, the default DNS is 8.8.8.8, the publicly available DNS.

http-proxy, https-proxy, no-proxy

The proxy for the nodes in the cluster, to be used when the cluster is behind a firewall and containers cannot access URL's on the external internet directly. For the parameter http-proxy and https-proxy, the value to provide is a URL and it will be set in the environment variable HTTP_PROXY and HTTPS_PROXY respectively in the nodes. For the parameter no-proxy, the value to provide is an IP or list of IP's separated by comma. Likewise, the value will be set in the environment variable NO_PROXY in the nodes.

For the networking model to the container, the following configuration can be set in the ClusterTemplate:

network-driver

The network driver name for instantiating container networks. Currently, the following network drivers are supported:

Driver Kubernetes
Flannel supported
Calico supported

If not specified, the default driver is Flannel for Kubernetes.

Particular network driver may require its own set of parameters for configuration, and these parameters are specified through the labels in the ClusterTemplate. Labels are arbitrary key=value pairs.

When Flannel is specified as the network driver, the following optional labels can be added:

_flannel_network_cidr

IPv4 network in CIDR format to use for the entire Flannel network. If not specified, the default is 10.100.0.0/16.

_flannel_network_subnetlen

The size of the subnet allocated to each host. If not specified, the default is 24.

_flannel_backend

The type of backend for Flannel. Possible values are udp, vxlan, host-gw. If not specified, the default is vxlan. Selecting the best backend depends on your networking. Generally, udp is the most generally supported backend since there is little requirement on the network, but it typically offers the lowest performance. The vxlan backend performs better, but requires vxlan support in the kernel so the image used to provision the nodes needs to include this support. The host-gw backend offers the best performance since it does not actually encapsulate messages, but it requires all the nodes to be on the same L2 network. The private Neutron network that Magnum creates does meet this requirement; therefore if the parameter fixed_network is not specified in the ClusterTemplate, host-gw is the best choice for the Flannel backend.

When Calico is specified as the network driver, the following optional labels can be added:

_calico_ipv4pool

IPv4 network in CIDR format which is the IP pool, from which Pod IPs will be chosen. If not specified, the default is 10.100.0.0/16. Stein default: 192.168.0.0/16 Train default: 192.168.0.0/16 Ussuri default: 10.100.0.0/16

_calico_ipv4pool_ipip

IPIP Mode to use for the IPv4 POOL created at start up. Ussuri default: Off

_calico_tag

Tag of the calico containers used to provision the calico node Stein default: v2.6.7 Train default: v3.3.6 Ussuri default: v3.13.1 Victoria default: v3.13.1 Wallaby default: v3.13.1

Besides, the Calico network driver needs kube_tag with v1.9.3 or later, because Calico needs extra mounts for the kubelet container. See commit of atomic-system-containers for more information.

NOTE: We have seen some issues using systemd as cgroup-driver with Calico together, so we highly recommend to use cgroupfs as the cgroup-driver for Calico.

Network for VMs

Every cluster has its own private network which is created along with the cluster. All the cluster nodes also get a floating ip on the external network. This approach works by default, but can be expensive in terms of complexity and cost (public Ipv4). To reduce this expense, the following methods can be used:

  1. Create private networks but do not assign floating IPs With this approach the cluster will be inaccessible from the outside. The user can add a floating ip to access it, but the certificates will not work.
  2. Create a private network and a LoadBalancer for the master node(s) There are two type of loadbalancers in magnum, one for the api and one for the services running on the nodes. For kubernetes LoadBalancer service type see: Kubernetes External Load Balancer. Not recommended when using only a single master node as it will add 2 amphora vms: one for the kube API and another for etcd thus being more expensive.

All the above can also work by passing an existing private network instead of creating a new one using --fixed-network and --fixed-subnet.

_Flannel

When using flannel, the backend should be 'host-gw' if performance is a requirement, 'udp' is too slow and 'vxlan' creates one more overlay network on top of the existing neutron network. On the other hand, in a flat network one should use 'vxlan' for network isolation.

_Calico

Calico allows users to setup network policies in kubernetes policies for network isolation.

High Availability

Support for highly available clusters is a work in progress, the goal being to enable clusters spanning multiple availability zones.

As of today you can specify one single availability zone for you cluster.

_availability_zone

The availability zone where the cluster nodes should be deployed. If not specified, the default is None.

Scaling

Performance tuning for periodic task

Magnum's periodic task performs a stack-get operation on the Heat stack underlying each of its clusters. If you have a large amount of clusters this can create considerable load on the Heat API. To reduce that load you can configure Magnum to perform one global stack-list per periodic task instead of one per cluster. This is disabled by default, both from the Heat and Magnum side since it causes a security issue, though: any user in any tenant holding the admin role can perform a global stack-list operation if Heat is configured to allow it for Magnum. If you want to enable it nonetheless, proceed as follows:

  1. Set periodic_global_stack_list in magnum.conf to True (False by default).

  2. Update heat policy to allow magnum list stacks. To this end, edit your heat policy file, usually etc/heat/policy.yaml``:

    ...
    stacks:global_index: "rule:context_is_admin"

    Now restart heat.

Containers and nodes

Scaling containers and nodes refers to increasing or decreasing allocated system resources. Scaling is a broad topic and involves many dimensions. In the context of Magnum in this guide, we consider the following issues:

  • Scaling containers and scaling cluster nodes (infrastructure)
  • Manual and automatic scaling

Since this is an active area of development, a complete solution covering all issues does not exist yet, but partial solutions are emerging.

Scaling containers involves managing the number of instances of the container by replicating or deleting instances. This can be used to respond to change in the workload being supported by the application; in this case, it is typically driven by certain metrics relevant to the application such as response time, etc. Other use cases include rolling upgrade, where a new version of a service can gradually be scaled up while the older version is gradually scaled down. Scaling containers is supported at the COE level and is specific to each COE as well as the version of the COE. You will need to refer to the documentation for the proper COE version for full details, but following are some pointers for reference.

For Kubernetes, pods are scaled manually by setting the count in the replication controller. Kubernetes version 1.3 and later also supports autoscaling.

Scaling the cluster nodes involves managing the number of nodes in the cluster by adding more nodes or removing nodes. There is no direct correlation between the number of nodes and the number of containers that can be hosted since the resources consumed (memory, CPU, etc) depend on the containers. However, if a certain resource is exhausted in the cluster, adding more nodes would add more resources for hosting more containers. As part of the infrastructure management, Magnum supports manual scaling through the attribute 'node_count' in the cluster, so you can scale the cluster simply by changing this attribute:

openstack coe cluster update mycluster replace node_count=2

Refer to the section Scale lifecycle operation for more details.

Adding nodes to a cluster is straightforward: Magnum deploys additional VMs or baremetal servers through the heat templates and invokes the COE-specific mechanism for registering the new nodes to update the available resources in the cluster. Afterward, it is up to the COE or user to re-balance the workload by launching new container instances or re-launching dead instances on the new nodes.

Removing nodes from a cluster requires some more care to ensure continuous operation of the containers since the nodes being removed may be actively hosting some containers. Magnum performs a simple heuristic that is specific to the COE to find the best node candidates for removal, as follows:

Kubernetes

Magnum scans the pods in the namespace 'Default' to determine the nodes that are not hosting any (empty nodes). If the number of nodes to be removed is equal or less than the number of these empty nodes, these nodes will be removed from the cluster. If the number of nodes to be removed is larger than the number of empty nodes, a warning message will be sent to the Magnum log and the empty nodes along with additional nodes will be removed from the cluster. The additional nodes are selected randomly and the pods running on them will be deleted without warning. For this reason, a good practice is to manage the pods through the replication controller so that the deleted pods will be relaunched elsewhere in the cluster. Note also that even when only the empty nodes are removed, there is no guarantee that no pod will be deleted because there is no locking to ensure that Kubernetes will not launch new pods on these nodes after Magnum has scanned the pods.

Currently, scaling containers and scaling cluster nodes are handled separately, but in many use cases, there are interactions between the two operations. For instance, scaling up the containers may exhaust the available resources in the cluster, thereby requiring scaling up the cluster nodes as well. Many complex issues are involved in managing this interaction. A presentation at the OpenStack Tokyo Summit 2015 covered some of these issues along with some early proposals, Exploring Magnum and Senlin integration for autoscaling containers <https://www.openstack.org/summit/tokyo-2015/videos/presentation/ exploring-magnum-and-senlin-integration-for-autoscaling-containers>. This remains an active area of discussion and research.

Storage

Currently Cinder provides the block storage to the containers, and the storage is made available in two ways: as ephemeral storage and as persistent storage.

Ephemeral storage

The filesystem for the container consists of multiple layers from the image and a top layer that holds the modification made by the container. This top layer requires storage space and the storage is configured in the Docker daemon through a number of storage options. When the container is removed, the storage allocated to the particular container is also deleted.

Magnum can manage the containers' filesystem in two ways, storing them on the local disk of the compute instances or in a separate Cinder block volume for each node in the cluster, mounts it to the node and configures it to be used as ephemeral storage. Users can specify the size of the Cinder volume with the ClusterTemplate attribute 'docker-volume-size'. Currently the block size is fixed at cluster creation time, but future lifecycle operations may allow modifying the block size during the life of the cluster.

_docker_volume_type

For drivers that support additional volumes for container storage, a label named 'docker_volume_type' is exposed so that users can select different cinder volume types for their volumes. The default volume must be set in 'default_docker_volume_type' in the 'cinder' section of magnum.conf, an obvious value is the default volume type set in cinder.conf of your cinder deployment . Please note, that docker_volume_type refers to a cinder volume type and it is unrelated to docker or kubernetes volumes.

Both local disk and the Cinder block storage can be used with a number of Docker storage drivers available.

  • 'devicemapper': When used with a dedicated Cinder volume it is configured using direct-lvm and offers very good performance. If it's used with the compute instance's local disk uses a loopback device offering poor performance and it's not recommended for production environments. Using the 'devicemapper' driver does allow the use of SELinux.
  • 'overlay' When used with a dedicated Cinder volume offers as good or better performance than devicemapper. If used on the local disk of the compute instance (especially with high IOPS drives) you can get significant performance gains. However, for kernel versions less than 4.9, SELinux must be disabled inside the containers resulting in worse container isolation, although it still runs in enforcing mode on the cluster compute instances.
  • 'overlay2' is the preferred storage driver, for all currently supported Linux distributions, and requires no extra configuration. When possible, overlay2 is the recommended storage driver. When installing Docker for the first time, overlay2 is used by default.

Persistent storage

In some use cases, data read/written by a container needs to persist so that it can be accessed later. To persist the data, a Cinder volume with a filesystem on it can be mounted on a host and be made available to the container, then be unmounted when the container exits.

Kubernetes allows a previously created Cinder block to be mounted to a pod and this is done by specifying the block ID in the pod YAML file. When the pod is scheduled on a node, Kubernetes will interface with Cinder to request the volume to be mounted on this node, then Kubernetes will launch the Docker container with the proper options to make the filesystem on the Cinder volume accessible to the container in the pod. When the pod exits, Kubernetes will again send a request to Cinder to unmount the volume's filesystem, making it available to be mounted on other nodes.

Magnum supports these features to use Cinder as persistent storage using the ClusterTemplate attribute 'volume-driver' and the support matrix for the COE types is summarized as follows:

Driver Kubernetes
cinder supported

Following are some examples for using Cinder as persistent storage.

Using Cinder in Kubernetes

NOTE: This feature requires Kubernetes version 1.5.0 or above. The public Fedora image from Atomic currently meets this requirement.

  1. Create the ClusterTemplate.

    Specify 'cinder' as the volume-driver for Kubernetes:

    openstack coe cluster template create k8s-cluster-template \
                               --image fedora-23-atomic-7 \
                               --keypair testkey \
                               --external-network public \
                               --dns-nameserver 8.8.8.8 \
                               --flavor m1.small \
                               --docker-volume-size 5 \
                               --network-driver flannel \
                               --coe kubernetes \
                               --volume-driver cinder
  2. Create the cluster:

    openstack coe cluster create k8s-cluster \
                          --cluster-template k8s-cluster-template \
                          --node-count 1

Kubernetes is now ready to use Cinder for persistent storage. Following is an example illustrating how Cinder is used in a pod.

  1. Create the cinder volume:

    cinder create --display-name=test-repo 1
    
    ID=$(cinder create --display-name=test-repo 1 | awk -F'|' '$2~/^[[:space:]]*id/ {print $3}')

    The command will generate the volume with a ID. The volume ID will be specified in Step 2.

  2. Create a pod in this cluster and mount this cinder volume to the pod. Create a file (e.g nginx-cinder.yaml) describing the pod:

    cat > nginx-cinder.yaml << END
    apiVersion: v1
    kind: Pod
    metadata:
      name: aws-web
    spec:
      containers:
        - name: web
          image: nginx
          ports:
            - name: web
              containerPort: 80
              hostPort: 8081
              protocol: TCP
          volumeMounts:
            - name: html-volume
              mountPath: "/usr/share/nginx/html"
      volumes:
        - name: html-volume
          cinder:
            # Enter the volume ID below
            volumeID: $ID
            fsType: ext4
    END

NOTE: The Cinder volume ID needs to be configured in the YAML file so the existing Cinder volume can be mounted in a pod by specifying the volume ID in the pod manifest as follows:

volumes:
- name: html-volume
  cinder:
    volumeID: $ID
    fsType: ext4
  1. Create the pod by the normal Kubernetes interface:

    kubectl create -f nginx-cinder.yaml

You can start a shell in the container to check that the mountPath exists, and on an OpenStack client you can run the command 'cinder list' to verify that the cinder volume status is 'in-use'.

Image Management

When a COE is deployed, an image from Glance is used to boot the nodes in the cluster and then the software will be configured and started on the nodes to bring up the full cluster. An image is based on a particular distro such as Fedora, Ubuntu, etc, and is prebuilt with the software specific to the COE such as Kubernetes. The image is tightly coupled with the following in Magnum:

  1. Heat templates to orchestrate the configuration.
  2. Template definition to map ClusterTemplate parameters to Heat template parameters.
  3. Set of scripts to configure software.

Collectively, they constitute the driver for a particular COE and a particular distro; therefore, developing a new image needs to be done in conjunction with developing these other components. Image can be built by various methods such as diskimagebuilder, or in some case, a distro image can be used directly. A number of drivers and the associated images is supported in Magnum as reference implementation. In this section, we focus mainly on the supported images.

All images must include support for cloud-init and the heat software configuration utility:

  • os-collect-config
  • os-refresh-config
  • os-apply-config
  • heat-config
  • heat-config-script

Additional software are described as follows.

Kubernetes on Fedora CoreOS

Fedoara CoreOS publishes a stock OpenStack image that is being used to deploy Kubernetes.

The following software are managed as systemd services:

  • kube-apiserver
  • kube-controller-manager
  • kube-scheduler
  • kube-proxy
  • kubelet
  • docker
  • etcd

The login user for this image is core.

Notification

Magnum provides notifications about usage data so that 3rd party applications can use the data for auditing, billing, monitoring, or quota purposes. This document describes the current inclusions and exclusions for Magnum notifications.

Magnum uses Cloud Auditing Data Federation (CADF) Notification as its notification format for better support of auditing, details about CADF are documented below.

Auditing with CADF

Magnum uses the PyCADF library to emit CADF notifications, these events adhere to the DMTF CADF specification. This standard provides auditing capabilities for compliance with security, operational, and business processes and supports normalized and categorized event data for federation and aggregation.

Below table describes the event model components and semantics for each component:

model component CADF Definition
OBSERVER

The RESOURCE that generates the CADF Event Record based on its observation (directly or indirectly) of the Actual Event.

INITIATOR

The RESOURCE that initiated, originated, or instigated the event's ACTION, according to the OBSERVER.

ACTION

The operation or activity the INITIATOR has performed, has attempted to perform or has pending against the event's TARGET, according to the OBSERVER.

TARGET

The RESOURCE against which the ACTION of a CADF Event Record was performed, attempted, or is pending, according to the OBSERVER.

OUTCOME

The result or status of the ACTION against the TARGET, according to the OBSERVER.

The payload portion of a CADF Notification is a CADF event, which is represented as a JSON dictionary. For example:

{
    "typeURI": "http://schemas.dmtf.org/cloud/audit/1.0/event",
    "initiator": {
        "typeURI": "service/security/account/user",
        "host": {
            "agent": "curl/7.22.0(x86_64-pc-linux-gnu)",
            "address": "127.0.0.1"
        },
        "id": "<initiator_id>"
    },
    "target": {
        "typeURI": "<target_uri>",
        "id": "openstack:1c2fc591-facb-4479-a327-520dade1ea15"
    },
    "observer": {
        "typeURI": "service/security",
        "id": "openstack:3d4a50a9-2b59-438b-bf19-c231f9c7625a"
    },
    "eventType": "activity",
    "eventTime": "2014-02-14T01:20:47.932842+00:00",
    "action": "<action>",
    "outcome": "success",
    "id": "openstack:f5352d7b-bee6-4c22-8213-450e7b646e9f",
}

Where the following are defined:

  • <initiator_id>: ID of the user that performed the operation
  • <target_uri>: CADF specific target URI, (i.e.: data/security/project)
  • <action>: The action being performed, typically: <operation>. <resource_type>

Additionally there may be extra keys present depending on the operation being performed, these will be discussed below.

Note, the eventType property of the CADF payload is different from the event_type property of a notifications. The former (eventType) is a CADF keyword which designates the type of event that is being measured, this can be: activity, monitor or control. Whereas the latter (event_type) is described in previous sections as: magnum.<resource_type>.<operation>

Supported Events

The following table displays the corresponding relationship between resource types and operations.

resource type supported operations typeURI
cluster

create, update, delete

service/magnum/cluster

Example Notification - Cluster Create

The following is an example of a notification that is sent when a cluster is created. This example can be applied for any create, update or delete event that is seen in the table above. The <action> and typeURI fields will be change.

{
    "event_type": "magnum.cluster.created",
    "message_id": "0156ee79-b35f-4cef-ac37-d4a85f231c69",
    "payload": {
        "typeURI": "http://schemas.dmtf.org/cloud/audit/1.0/event",
        "initiator": {
            "typeURI": "service/security/account/user",
            "id": "c9f76d3c31e142af9291de2935bde98a",
            "user_id": "0156ee79-b35f-4cef-ac37-d4a85f231c69",
            "project_id": "3d4a50a9-2b59-438b-bf19-c231f9c7625a"
        },
        "target": {
            "typeURI": "service/magnum/cluster",
            "id": "openstack:1c2fc591-facb-4479-a327-520dade1ea15"
        },
        "observer": {
            "typeURI": "service/magnum/cluster",
            "id": "openstack:3d4a50a9-2b59-438b-bf19-c231f9c7625a"
        },
        "eventType": "activity",
        "eventTime": "2015-05-20T01:20:47.932842+00:00",
        "action": "create",
        "outcome": "success",
        "id": "openstack:f5352d7b-bee6-4c22-8213-450e7b646e9f",
        "resource_info": "671da331c47d4e29bb6ea1d270154ec3"
    }
    "priority": "INFO",
    "publisher_id": "magnum.host1234",
    "timestamp": "2016-05-20 15:03:45.960280"
}

Container Monitoring

As of this moment, monitoring is only supported for Kubernetes clusters. For details, please refer to the monitoring document.

Kubernetes Post Install Manifest

A new config option post_install_manifest_url under [kubernetes] section has been added to support installing cloud provider/vendor specific manifest after provisioning the k8s cluster. It's an URL pointing to the manifest file. For example, cloud admin can set their specific StorageClass into this file, then it will be automatically setup after the cluster is created by end user.

NOTE: The URL must be reachable from the master nodes when creating the cluster.

Kubernetes External Load Balancer

Keystone Authentication and Authorization for Kubernetes

Node Groups

Kubernetes Health Monitoring