Miscellaneous update Catch up on reviewers' comments from previous bay patch and update for new changes/features in Magnum. Partially implements: blueprint user-guide Change-Id: I2729bbca8c72950e7ae7eb2917b1b3c008b6d2f8
90 KiB
Magnum User Guide
This guide is intended for users who use Magnum to deploy and manage clusters of hosts for a Container Orchestration Engine. It describes the infrastructure that Magnum creates and how to work with them.
Section 1-3 describe Magnum itself, including an overview, the CLI and Horizon interface. Section 4-9 describe the Container Orchestration Engine (COE) supported along with a guide on how to select one that best meets your needs and how to develop a driver for a new COE. Section 10-15 describe the low level OpenStack infrastructure that is created and managed by Magnum to support the COE's.
Contents
- Overview
- Python Client
- Horizon Interface
- Bay Drivers
- Choosing a COE
- Native clients
- Kubernetes
- Swarm
- Mesos
- Transport Layer Security
- Networking
- High Availability
- Scaling
- Storage
- Image Management
- Notification
Terminology
- Bay
-
A bay is the construct in which Magnum launches container orchestration engines. After a bay has been created the user is able to add containers to it either directly, or in the case of the Kubernetes container orchestration engine within pods - a logical construct specific to that implementation. A bay is created based on a baymodel.
- Baymodel
-
A baymodel in Magnum is roughly equivalent to a flavor in Nova. It acts as a template that defines options such as the container orchestration engine, keypair and image for use when Magnum is creating bays using the given baymodel.
- Container Orchestration Engine (COE)
-
A container orchestration engine manages the lifecycle of one or more containers, logically represented in Magnum as a bay. Magnum supports a number of container orchestration engines, each with their own pros and cons, including Docker Swarm, Kubernetes, and Mesos.
Overview
To be filled in
Magnum rationale, concept, compelling features
BayModel
A baymodel is a collection of parameters to describe how a bay can be constructed. Some parameters are relevant to the infrastructure of the bay, while others are for the particular COE. In a typical workflow, a user would create a baymodel, then create one or more bays using the baymodel. A cloud provider can also define a number of baymodels and provide them to the users. A baymodel cannot be updated or deleted if a bay using this baymodel still exists.
The definition and usage of the parameters of a baymodel are as follows. They are loosely grouped as: mandatory, infrastructure, COE specific.
- --coe <coe>
-
Specify the Container Orchestration Engine to use. Supported COE's include 'kubernetes', 'swarm', 'mesos'. If your environment has additional bay drivers installed, refer to the bay driver documentation for the new COE names. This is a mandatory parameter and there is no default value.
- --image-id <image-id>
-
The name or UUID of the base image in Glance to boot the servers for the bay. The image must have the attribute 'os-distro' defined as appropriate for the bay driver. For the currently supported images, the os-distro names are:
COE os-distro Kubernetes Fedora-atomic, CoreOS Swarm Fedora-atomic Mesos Ubuntu
This is a mandatory parameter and there is no default value.
- --keypair-id <keypair-id>
-
The name or UUID of the SSH keypair to configure in the bay servers for ssh access. You will need the key to be able to ssh to the servers in the bay. The login name is specific to the bay driver. This is a mandatory parameter and there is no default value.
- --external-network-id <external-network-id>
-
The name or network ID of a Neutron network to provide connectivity to the external internet for the bay. This network must be an external network, i.e. its attribute 'router:external' must be 'True'. The servers in the bay will be connected to a private network and Magnum will create a router between this private network and the external network. This will allow the servers to download images, access discovery service, etc, and the containers to install packages, etc. In the opposite direction, floating IP's will be allocated from the external network to provide access from the external internet to servers and the container services hosted in the bay. This is a mandatory parameter and there is no default value.
- --name <name>
-
Name of the baymodel to create. The name does not have to be unique. If multiple baymodels have the same name, you will need to use the UUID to select the baymodel when creating a bay or updating, deleting a baymodel. If a name is not specified, a random name will be generated using a string and a number, for example "pi-13-model".
- --public
-
Access to a baymodel is normally limited to the admin, owner or users within the same tenant as the owners. Setting this flag makes the baymodel public and accessible by other users. The default is not public.
- --server-type <server-type>
-
The servers in the bay can be VM or baremetal. This parameter selects the type of server to create for the bay. The default is 'vm' and currently this is the only supported server type.
- --network-driver <network-driver>
-
The name of a network driver for providing the networks for the containers. Note that this is different and separate from the Neutron network for the bay. The operation and networking model are specific to the particular driver; refer to the Networking section for more details. Supported network drivers and the default driver are:
COE Network-Driver Default Kubernetes Flannel Flannel Swarm Docker, Flannel Flannel Mesos Docker Docker - --volume-driver <volume-driver>
-
The name of a volume driver for managing the persistent storage for the containers. The functionality supported are specific to the driver. Supported volume drivers and the default driver are:
COE Volume-Driver Default Kubernetes Cinder No Driver Swarm Rexray No Driver Mesos Rexray No Driver - --dns-nameserver <dns-nameserver>
-
The DNS nameserver for the servers and containers in the bay to use. This is configured in the private Neutron network for the bay. The default is '8.8.8.8'.
- --flavor-id <flavor-id>
-
The nova flavor id for booting the node servers. The default is 'm1.small'.
- --master-flavor-id <master-flavor-id>
-
The nova flavor id for booting the master or manager servers. The default is 'm1.small'.
- --http-proxy <http-proxy>
-
The IP address for a proxy to use when direct http access from the servers to sites on the external internet is blocked. This may happen in certain countries or enterprises, and the proxy allows the servers and containers to access these sites. The format is a URL including a port number. The default is 'None'.
- --https-proxy <https-proxy>
-
The IP address for a proxy to use when direct https access from the servers to sites on the external internet is blocked. This may happen in certain countries or enterprises, and the proxy allows the servers and containers to access these sites. The format is a URL including a port number. The default is 'None'.
- --no-proxy <no-proxy>
-
When a proxy server is used, some sites should not go through the proxy and should be accessed normally. In this case, you can specify these sites as a comma separated list of IP's. The default is 'None'.
- --docker-volume-size <docker-volume-size>
-
The size in GB for the local storage on each server for the Docker daemon to cache the images and host the containers. Cinder volumes provide the storage. The default is 25 GB. For the 'devicemapper' storage driver, the minimum value is 3GB. For the 'overlay' storage driver, the minimum value is 1GB.
- --docker-storage-driver <docker-storage-driver>
-
The name of a driver to manage the storage for the images and the container's writable layer. The supported drivers are 'devicemapper' and 'overlay'. The default is 'devicemapper'.
- --labels <KEY1=VALUE1,KEY2=VALUE2;KEY3=VALUE3...>
-
Arbitrary labels in the form of key=value pairs. The accepted keys and valid values are defined in the bay drivers. They are used as a way to pass additional parameters that are specific to a bay driver. Refer to the subsection on labels for a list of the supported key/value pairs and their usage.
- --tls-disabled
-
Transport Layer Security (TLS) is normally enabled to secure the bay. In some cases, users may want to disable TLS in the bay, for instance during development or to troubleshoot certain problems. Specifying this parameter will disable TLS so that users can access the COE endpoints without a certificate. The default is TLS enabled.
- --registry-enabled
-
Docker images by default are pulled from the public Docker registry, but in some cases, users may want to use a private registry. This option provides an alternative registry based on the Registry V2: Magnum will create a local registry in the bay backed by swift to host the images. Refer to Docker Registry 2.0 for more details. The default is to use the public registry.
- --master-lb-enabled
-
Since multiple masters may exist in a bay, a load balancer is created to provide the API endpoint for the bay and to direct requests to the masters. In some cases, such as when the LBaaS service is not available, this option can be set to 'false' to create a bay without the load balancer. In this case, one of the masters will serve as the API endpoint. The default is 'true', i.e. to create the load balancer for the bay.
Labels
To be filled in
Bay
A bay is an instance of the baymodel of a COE. Magnum deploys a bay by referring to the attributes defined in the particular baymodel as well as a few additional parameters for the bay. Magnum deploys the orchestration templates provided by the bay driver to create and configure all the necessary infrastructure. When ready, the bay is a fully operational COE that can host containers.
Infrastructure
The infrastructure of the bay consists of the resources provided by the various OpenStack services. Existing infrastructure, including infrastructure external to OpenStack, can also be used by the bay, such as DNS, public network, public discovery service, Docker registry. The actual resources created depends on the COE type and the options specified; therefore you need to refer to the bay driver documentation of the COE for specific details. For instance, the option '--master-lb-enabled' in the baymodel will cause a load balancer pool along with the health monitor and floating IP to be created. It is important to distinguish resources in the IaaS level from resources in the PaaS level. For instance, the infrastructure networking in OpenStack IaaS is different and separate from the container networking in Kubernetes or Swarm PaaS.
Typical infrastructure includes the following.
- Servers
-
The servers host the containers in the bay and these servers can be VM or bare metal. VM's are provided by Nova. Since multiple VM's are hosted on a physical server, the VM's provide the isolation needed for containers between different tenants running on the same physical server. Bare metal servers are provided by Ironic and are used when peak performance with virtually no overhead is needed for the containers.
- Identity
-
Keystone provides the authentication and authorization for managing the bay infrastructure.
- Network
-
Networking among the servers is provided by Neutron. Since COE currently are not multi-tenant, isolation for multi-tenancy on the networking level is done by using a private network for each bay. As a result, containers belonging to one tenant will not be accessible to containers or servers of another tenant. Other networking resources may also be used, such as load balancer and routers. Networking among containers can be provided by Kuryr if needed.
- Storage
-
Cinder provides the block storage that is used for both hosting the containers as well as persistent storage for the containers.
- Security
-
Barbican provides the storage of secrets such as certificates used in the bay Transport Layer Security (TLS).
Life cycle
The set of life cycle operations on the bay is one of the key value that Magnum provides, enabling bays to be managed painlessly on OpenStack. The current operations are the basic CRUD operations, but more advanced operations are under discussion in the community and will be implemented as needed.
NOTE The OpenStack resources created for a bay are fully accessible to the bay owner. Care should be taken when modifying or reusing these resources to avoid impacting Magnum operations in unexpected manners. For instance, if you launch your own Nova instance on the bay private network, Magnum would not be aware of this instance. Therefore, the bay-delete operation will fail because Magnum would not delete the extra Nova instance and the private Neutron network cannot be removed while a Nova instance is still attached.
NOTE Currently Heat nested templates are used to create the resources; therefore if an error occurs, you can troubleshoot through Heat. For more help on Heat stack troubleshooting, refer to the Troubleshooting Guide.
Create
The 'bay-create' command deploys a bay, for example:
magnum bay-create --name mybay \
--baymodel mymodel \
--node-count 8 \
--master-count 3
The 'bay-create' operation is asynchronous; therefore you can initiate another 'bay-create' operation while the current bay is being created. If the bay fails to be created, the infrastructure created so far may be retained or deleted depending on the particular orchestration engine. As a common practice, a failed bay is retained during development for troubleshooting, but they are automatically deleted in production. The current bay drivers use Heat templates and the resources of a failed 'bay-create' are retained.
The definition and usage of the parameters for 'bay-create' are as follows:
- --baymodel <baymodel>
-
The ID or name of the baymodel to use. This is a mandatory parameter. Once a baymodel is used to create a bay, it cannot be deleted or modified until all bays that use the baymodel have been deleted.
- --name <name>
-
Name of the bay to create. If a name is not specified, a random name will be generated using a string and a number, for example "gamma-7-bay".
- --node-count <node-count>
-
The number of servers that will serve as node in the bay. The default is 1.
- --master-count <master-count>
-
The number of servers that will serve as master for the bay. The default is 1. Set to more than 1 master to enable High Availability. If the option '--master-lb-enabled' is specified in the baymodel, the master servers will be placed in a load balancer pool.
- --discovery-url <discovery-url>
-
The custom discovery url for node discovery. This is used by the COE to discover the servers that have been created to host the containers. The actual discovery mechanism varies with the COE. In some cases, Magnum fills in the server info in the discovery service. In other cases, if the discovery-url is not specified, Magnum will use the public discovery service at:
https://discovery.etcd.io
In this case, Magnum will generate a unique url here for each bay and store the info for the servers.
- --timeout <timeout>
-
The timeout for bay creation in minutes. The value expected is a positive integer and the default is 60 minutes. If the timeout is reached during bay-create, the operation will be aborted and the bay status will be set to 'CREATE_FAILED'.
List
The 'bay-list' command lists all the bays that belong to the tenant, for example:
magnum bay-list
Show
The 'bay-show' command prints all the details of a bay, for example:
magnum bay-show mybay
The properties include those not specified by users that have been assigned default values and properties from new resources that have been created for the bay.
Update
A bay can be modified using the 'bay-update' command, for example:
magnum bay-update mybay replace node_count=8
The parameters are positional and their definition and usage are as follows.
- <bay>
-
This is the first parameter, specifying the UUID or name of the bay to update.
- <op>
-
This is the second parameter, specifying the desired change to be made to the bay attributes. The allowed changes are 'add', 'replace' and 'remove'.
- <attribute=value>
-
This is the third parameter, specifying the targeted attributes in the bay as a list separated by blank space. To add or replace an attribute, you need to specify the value for the attribute. To remove an attribute, you only need to specify the name of the attribute. Currently the only attribute that can be replaced or removed is 'node_count'. The attributes 'name', 'master_count' and 'discovery_url' cannot be replaced or delete. The table below summarizes the possible change to a bay.
Attribute add replace remove node_count no add/remove nodes reset to default of 1 master_count no no no
name no no no
discovery_url no no no
The 'bay-update' operation cannot be initiated when another operation is in progress.
NOTE: The attribute names in bay-update are slightly different from the corresponding names in the bay-create command: the dash '-' is replaced by an underscore '_'. For instance, 'node-count' in bay-create is 'node_count' in bay-update.
Scale
Scaling a bay means adding servers to or removing servers from the bay. Currently, this is done through the 'bay-update' operation by modifying the node-count attribute, for example:
magnum bay-update mybay replace node_count=2
When some nodes are removed, Magnum will attempt to find nodes with no containers to remove. If some nodes with containers must be removed, Magnum will log a warning message.
Delete
The 'bay-delete' operation removes the bay by deleting all resources such as servers, network, storage; for example:
magnum bay-delete mybay
The only parameter for the bay-delete command is the ID or name of the bay to delete. Multiple bays can be specified, separated by a blank space.
If the operation fails, there may be some remaining resources that have not been deleted yet. In this case, you can troubleshoot through Heat. If the templates are deleted manually in Heat, you can delete the bay in Magnum to clean up the bay from Magnum database.
The 'bay-delete' operation can be initiated when another operation is still in progress.
Python Client
Installation
Follow the instructions in the OpenStack Installation Guide to enable the repositories for your distribution:
Install using distribution packages for RHEL/CentOS/Fedora:
$ sudo yum install python-magnumclient
Install using distribution packages for Ubuntu/Debian:
$ sudo apt-get install python-magnumclient
Install using distribution packages for OpenSuSE and SuSE Enterprise Linux:
$ sudo zypper install python-magnumclient
Verifying installation
Execute the magnum command with the --version argument to confirm that the client is installed and in the system path:
$ magnum --version
1.1.0
Note that the version returned may differ from the above, 1.1.0 was the latest available version at the time of writing.
Using the command-line client
Refer to the OpenStack Command-Line Interface Reference for a full list of the commands supported by the magnum command-line client.
Horizon Interface
To be filled in with screenshots
Bay Drivers
A bay driver is a collection of python code, heat templates, scripts, images, and documents for a particular COE on a particular distro. Magnum presents the concept of baymodels and bays. The implementation for a particular bay type is provided by the bay driver. In other words, the bay driver provisions and manages the infrastructure for the COE. Magnum includes default drivers for the following COE and distro pairs:
COE | distro |
---|---|
Kubernetes | Fedora Atomic |
Kubernetes | CoreOS |
Swarm | Fedora Atomic |
Mesos | Ubuntu |
Magnum is designed to accommodate new bay drivers to support custom COE's and this section describes how a new bay driver can be constructed and enabled in Magnum.
Directory structure
Magnum expects the components to be organized in the following directory structure under the directory 'drivers':
COE_Distro/
image/
templates/
api.py
driver.py
monitor.py
scale.py
template_def.py
version.py
The minimum required components are:
- driver.py
-
Python code that implements the controller operations for the particular COE. The driver must implement: Currently supported:
bay_create
,bay_update
,bay_delete
. - templates
-
A directory of orchestration templates for managing the lifecycle of bays, including creation, configuration, update, and deletion. Currently only Heat templates are supported, but in the future other orchestration mechanism such as Ansible may be supported.
- template_def.py
-
Python code that maps the parameters from the baymodel to the input parameters for the orchestration and invokes the orchestration in the templates directory.
- version.py
-
Tracks the latest version of the driver in this directory. This is defined by a
version
attribute and is represented in the form of1.0.0
. It should also include aDriver
attribute with descriptive name such asfedora_swarm_atomic
.
The remaining components are optional:
- image
-
Instructions for obtaining or building an image suitable for the COE.
- api.py
-
Python code to interface with the COE.
- monitor.py
-
Python code to monitor the resource utilization of the bay.
- scale.py
-
Python code to scale the bay by adding or removing nodes.
Sample bay driver
To help developers in creating new COE drivers, a minimal bay driver is provided as an example. The 'docker' bay driver will simply deploy a single VM running Ubuntu with the latest Docker version installed. It is not a true cluster, but the simplicity will help to illustrate the key concepts.
To be filled in
Installing a bay driver
To be filled in
Choosing a COE
Magnum supports a variety of COE options, and allows more to be added over time as they gain popularity. As an operator, you may choose to support the full variety of options, or you may want to offer a subset of the available choices. Given multiple choices, your users can run one or more bays, and each may use a different COE. For example, I might have multiple bays that use Kubernetes, and just one bay that uses Swarm. All of these bays can run concurrently, even though they use different COE software.
Choosing which COE to use depends on what tools you want to use to manage your containers once you start your app. If you want to use the Docker tools, you may want to use the Swarm bay type. Swarm will spread your containers across the various nodes in your bay automatically. It does not monitor the health of your containers, so it can't restart them for you if they stop. It will not automatically scale your app for you (as of Swarm version 1.2.2). You may view this as a plus. If you prefer to manage your application yourself, you might prefer swarm over the other COE options.
Kubernetes (as of v1.2) is more sophisticated than Swarm (as of v1.2.2). It offers an attractive YAML file description of a pod, which is a grouping of containers that run together as part of a distributed application. This file format allows you to model your application deployment using a declarative style. It has support for auto scaling and fault recovery, as well as features that allow for sophisticated software deployments, including canary deploys and blue/green deploys. Kubernetes is very popular, especially for web applications.
Apache Mesos is a COE that has been around longer than Kubernetes or Swarm. It allows for a variety of different frameworks to be used along with it, including Marathon, Aurora, Chronos, Hadoop, and a number of others.
The Apache Mesos framework design can be used to run alternate COE software directly on Mesos. Although this approach is not widely used yet, it may soon be possible to run Mesos with Kubernetes and Swarm as frameworks, allowing you to share the resources of a bay between multiple different COEs. Until this option matures, we encourage Magnum users to create multiple bays, and use the COE in each bay that best fits the anticipated workload.
Finding the right COE for your workload is up to you, but Magnum offers you a choice to select among the prevailing leading options. Once you decide, see the next sections for examples of how to create a bay with your desired COE.
Native clients
To be filled in
Kubernetes
Kubernetes uses a range of terminology that we refer to in this guide. We define these common terms for your reference:
- Pod
-
When using the Kubernetes container orchestration engine, a pod is the smallest deployable unit that can be created and managed. A pod is a co-located group of application containers that run with a shared context. When using Magnum, pods are created and managed within bays. Refer to the pods section in the Kubernetes User Guide for more information.
- Replication controller
-
A replication controller is used to ensure that at any given time a certain number of replicas of a pod are running. Pods are automatically created and deleted by the replication controller as necessary based on a template to ensure that the defined number of replicas exist. Refer to the replication controller section in the Kubernetes User Guide for more information.
- Service
-
A service is an additional layer of abstraction provided by the Kubernetes container orchestration engine which defines a logical set of pods and a policy for accessing them. This is useful because pods are created and deleted by a replication controller, for example, other pods needing to discover them can do so via the service abstraction. Refer to the services section in the Kubernetes User Guide for more information.
When Magnum deploys a Kubernetes bay, it uses parameters defined in the baymodel and specified on the bay-create command, for example:
magnum baymodel-create --name k8sbaymodel \
--image-id fedora-atomic-latest \
--keypair-id testkey \
--external-network-id public \
--dns-nameserver 8.8.8.8 \
--flavor-id m1.small \
--docker-volume-size 5 \
--network-driver flannel \
--coe kubernetes
magnum bay-create --name k8sbay \
--baymodel k8sbaymodel \
--master-count 3 \
--node-count 8
Refer to the Baymodel and Bay sections for the full list of parameters. Following are further details relevant to a Kubernetes bay:
- Number of masters (master-count)
-
Specified in the bay-create command to indicate how many servers will run as master in the bay. Having more than one will provide high availability. The masters will be in a load balancer pool and the virtual IP address (VIP) of the load balancer will serve as the Kubernetes API endpoint. For external access, a floating IP associated with this VIP is available and this is the endpoint shown for Kubernetes in the 'bay-show' command.
- Number of nodes (node-count)
-
Specified in the bay-create command to indicate how many servers will run as node in the bay to host the users' pods. The nodes are registered in Kubernetes using the Nova instance name.
- Network driver (network-driver)
-
Specified in the baymodel to select the network driver. The supported and default network driver is 'flannel', an overlay network providing a flat network for all pods. Refer to the Networking section for more details.
- Volume driver (volume-driver)
-
Specified in the baymodel to select the volume driver. The supported volume driver is 'cinder', allowing Cinder volumes to be mounted in containers for use as persistent storage. Data written to these volumes will persist after the container exits and can be accessed again from other containers, while data written to the union file system hosting the container will be deleted. Refer to the Storage section for more details.
- Storage driver (docker-storage-driver)
-
Specified in the baymodel to select the Docker storage driver. The supported storage drivers are 'devicemapper' and 'overlay', with 'devicemapper' being the default. You may get better performance with the overlay driver depending on your use patterns, with the requirement that SELinux must be disabled inside the containers, although it still runs in enforcing mode on the bay servers. Magnum will create a Cinder volume for each node, mount it on the node and configure it as a logical volume named 'docker'. The Docker daemon will run the selected device driver to manage this logical volume and host the container writable layer there. Refer to the Storage section for more details.
- Image (image-id)
-
Specified in the baymodel to indicate the image to boot the servers. The image binary is loaded in Glance with the attribute 'os_distro = fedora-atomic'. Current supported images are Fedora Atomic (download from Fedora ) and CoreOS (download from CoreOS )
- TLS (tls-disabled)
-
Transport Layer Security is enabled by default, so you need a key and signed certificate to access the Kubernetes API and CLI. Magnum handles its own key and certificate when interfacing with the Kubernetes bay. In development mode, TLS can be disabled. Refer to the 'Transport Layer Security'_ section for more details.
- What runs on the servers
-
The servers for Kubernetes master host containers in the 'kube-system' name space to run the Kubernetes proxy, scheduler and controller manager. The masters will not host users' pods. Kubernetes API server, docker daemon, etcd and flannel run as systemd services. The servers for Kubernetes node also host a container in the 'kube-system' name space to run the Kubernetes proxy, while Kubernetes kubelet, docker daemon and flannel run as systemd services.
- Log into the servers
-
You can log into the master servers using the login 'fedora' and the keypair specified in the baymodel.
External load balancer for services
All Kubernetes pods and services created in the bay are assigned IP addresses on a private container network so they can access each other and the external internet. However, these IP addresses are not accessible from an external network.
To publish a service endpoint externally so that the service can be accessed from the external network, Kubernetes provides the external load balancer feature. This is done by simply specifying in the service manifest the attribute "type: LoadBalancer". Magnum enables and configures the Kubernetes plugin for OpenStack so that it can interface with Neutron and manage the necessary networking resources.
When the service is created, Kubernetes will add an external load balancer in front of the service so that the service will have an external IP address in addition to the internal IP address on the container network. The service endpoint can then be accessed with this external IP address. Kubernetes handles all the life cycle operations when pods are modified behind the service and when the service is deleted.
Refer to the document Kubernetes external load balancer for more details.
Swarm
A Swarm bay is a pool of servers running Docker daemon that is managed as a single Docker host. One or more Swarm managers accepts the standard Docker API and manage this pool of servers. Magnum deploys a Swarm bay using parameters defined in the baymodel and specified on the 'bay-create' command, for example:
magnum baymodel-create --name swarmbaymodel \
--image-id fedora-atomic-latest \
--keypair-id testkey \
--external-network-id public \
--dns-nameserver 8.8.8.8 \
--flavor-id m1.small \
--docker-volume-size 5 \
--coe swarm
magnum bay-create --name swarmbay \
--baymodel swarmbaymodel \
--master-count 3 \
--node-count 8
Refer to the Baymodel and Bay sections for the full list of parameters. Following are further details relevant to Swarm:
- What runs on the servers
-
There are two types of servers in the Swarm bay: managers and nodes. The Docker daemon runs on all servers. On the servers for manager, the Swarm manager is run as a Docker container on port 2376 and this is initiated by the systemd service swarm-manager. Etcd is also run on the manager servers for discovery of the node servers in the bay. On the servers for node, the Swarm agent is run as a Docker container on port 2375 and this is initiated by the systemd service swarm-agent. On start up, the agents will register themselves in etcd and the managers will discover the new node to manage.
- Number of managers (master-count)
-
Specified in the bay-create command to indicate how many servers will run as managers in the bay. Having more than one will provide high availability. The managers will be in a load balancer pool and the load balancer virtual IP address (VIP) will serve as the Swarm API endpoint. A floating IP associated with the load balancer VIP will serve as the external Swarm API endpoint. The managers accept the standard Docker API and perform the corresponding operation on the servers in the pool. For instance, when a new container is created, the managers will select one of the servers based on some strategy and schedule the containers there.
- Number of nodes (node-count)
-
Specified in the bay-create command to indicate how many servers will run as nodes in the bay to host your Docker containers. These servers will register themselves in etcd for discovery by the managers, and interact with the managers. Docker daemon is run locally to host containers from users.
- Network driver (network-driver)
-
Specified in the baymodel to select the network driver. The supported drivers are 'docker' and 'flannel', with 'docker' as the default. With the 'docker' driver, containers are connected to the 'docker0' bridge on each node and are assigned local IP address. With the 'flannel' driver, containers are connected to a flat overlay network and are assigned IP address by Flannel. Refer to the Networking section for more details.
- Volume driver (volume-driver)
-
Specified in the baymodel to select the volume driver to provide persistent storage for containers. The supported volume driver is 'rexray'. The default is no volume driver. When 'rexray' or other volume driver is deployed, you can use the Docker 'volume' command to create, mount, unmount, delete volumes in containers. Cinder block storage is used as the backend to support this feature. Refer to the Storage section for more details.
- Storage driver (docker-storage-driver)
-
Specified in the baymodel to select the Docker storage driver. The supported storage driver are 'devicemapper' and 'overlay', with 'devicemapper' being the default. You may get better performance with the 'overlay' driver depending on your use patterns, with the requirement that SELinux must be disabled inside the containers, although it still runs in enforcing mode on the bay servers. Magnum will create a Cinder volume for each node and attach it as a device. Then depending on the driver, additional configuration is performed to make the volume available to the particular driver. For instance, 'devicemapper' uses LVM; therefore Magnum will create physical volume and logical volume using the attached device. Refer to the Storage section for more details.
- Image (image-id)
-
Specified in the baymodel to indicate the image to boot the servers for the Swarm manager and node. The image binary is loaded in Glance with the attribute 'os_distro = fedora-atomic'. Current supported image is Fedora Atomic (download from Fedora )
- TLS (tls-disabled)
-
Transport Layer Security is enabled by default to secure the Swarm API for access by both the users and Magnum. You will need a key and a signed certificate to access the Swarm API and CLI. Magnum handles its own key and certificate when interfacing with the Swarm bay. In development mode, TLS can be disabled. Refer to the 'Transport Layer Security'_ section for details on how to create your key and have Magnum sign your certificate.
- Log into the servers
-
You can log into the manager and node servers with the account 'fedora' and the keypair specified in the baymodel.
Mesos
A Mesos bay consists of a pool of servers running as Mesos agents, managed by a set of servers running as Mesos masters. Mesos manages the resources from the agents but does not itself deploy containers. Instead, one of more Mesos frameworks running on the Mesos bay would accept user requests on their own endpoint, using their particular API. These frameworks would then negotiate the resources with Mesos and the containers are deployed on the servers where the resources are offered.
Magnum deploys a Mesos bay using parameters defined in the baymodel and specified on the 'bay-create' command, for example:
magnum baymodel-create --name mesosbaymodel \
--image-id ubuntu-mesos \
--keypair-id testkey \
--external-network-id public \
--dns-nameserver 8.8.8.8 \
--flavor-id m1.small \
--coe mesos
magnum bay-create --name mesosbay \
--baymodel mesosbaymodel \
--master-count 3 \
--node-count 8
Refer to the Baymodel and Bay sections for the full list of parameters. Following are further details relevant to Mesos:
- What runs on the servers
-
There are two types of servers in the Mesos bay: masters and agents. The Docker daemon runs on all servers. On the servers for master, the Mesos master is run as a process on port 5050 and this is initiated by the upstart service 'mesos-master'. Zookeeper is also run on the master servers, initiated by the upstart service 'zookeeper'. Zookeeper is used by the master servers for electing the leader among the masters, and by the agent servers and frameworks to determine the current leader. The framework Marathon is run as a process on port 8080 on the master servers, initiated by the upstart service 'marathon'. On the servers for agent, the Mesos agent is run as a process initiated by the upstart service 'mesos-agent'.
- Number of master (master-count)
-
Specified in the bay-create command to indicate how many servers will run as masters in the bay. Having more than one will provide high availability. If the load balancer option is specified, the masters will be in a load balancer pool and the load balancer virtual IP address (VIP) will serve as the Mesos API endpoint. A floating IP associated with the load balancer VIP will serve as the external Mesos API endpoint.
- Number of agents (node-count)
-
Specified in the bay-create command to indicate how many servers will run as Mesos agent in the bay. Docker daemon is run locally to host containers from users. The agents report their available resources to the master and accept request from the master to deploy tasks from the frameworks. In this case, the tasks will be to run Docker containers.
- Network driver (network-driver)
-
Specified in the baymodel to select the network driver. Currently 'docker' is the only supported driver: containers are connected to the 'docker0' bridge on each node and are assigned local IP address. Refer to the Networking section for more details.
- Volume driver (volume-driver)
-
Specified in the baymodel to select the volume driver to provide persistent storage for containers. The supported volume driver is 'rexray'. The default is no volume driver. When 'rexray' or other volume driver is deployed, you can use the Docker 'volume' command to create, mount, unmount, delete volumes in containers. Cinder block storage is used as the backend to support this feature. Refer to the Storage section for more details.
- Storage driver (docker-storage-driver)
-
This is currently not supported for Mesos.
Image (image-id)
Specified in the baymodel to indicate the image to boot the servers for the Mesos master and agent. The image binary is loaded in Glance with the attribute 'os_distro = ubuntu'. You can download the ready-built image, or you can create the image as described below in the Building Mesos image section.
- TLS (tls-disabled)
-
Transport Layer Security is currently not implemented yet for Mesos.
- Log into the servers
-
You can log into the manager and node servers with the account 'ubuntu' and the keypair specified in the baymodel.
Building Mesos image
The boot image for Mesos bay is an Ubuntu 14.04 base image with the following middleware pre-installed:
docker
zookeeper
mesos
marathon
The bay driver provides two ways to create this image, as follows.
Diskimage-builder
To run the diskimage-builder tool manually, use the provided elements. Following are the typical steps to use the diskimage-builder tool on an Ubuntu server:
$ sudo apt-get update
$ sudo apt-get install git qemu-utils python-pip
$ git clone https://git.openstack.org/openstack/magnum
$ git clone https://git.openstack.org/openstack/diskimage-builder.git
$ git clone https://git.openstack.org/openstack/dib-utils.git
$ git clone https://git.openstack.org/openstack/tripleo-image-elements.git
$ git clone https://git.openstack.org/openstack/heat-templates.git
$ export PATH="${PWD}/dib-utils/bin:$PATH"
$ export ELEMENTS_PATH=tripleo-image-elements/elements:heat-templates/hot/software-config/elements:magnum/magnum/drivers/mesos_ubuntu_v1/image/mesos
$ export DIB_RELEASE=trusty
$ diskimage-builder/bin/disk-image-create ubuntu vm docker mesos \
os-collect-config os-refresh-config os-apply-config \
heat-config heat-config-script \
-o ubuntu-14.04.3-mesos-0.25.0.qcow2
Dockerfile
To build the image as above but within a Docker container, use the provided Dockerfile. The output image will be saved as '/tmp/ubuntu-mesos.qcow2'. Following are the typical steps to run a Docker container to build the image:
$ git clone https://git.openstack.org/openstack/magnum
$ cd magnum/magnum/drivers/mesos_ubuntu_v1/image
$ sudo docker build -t magnum/mesos-builder .
$ sudo docker run -v /tmp:/output --rm -ti --privileged magnum/mesos-builder
...
Image file /output/ubuntu-mesos.qcow2 created...
Using Marathon
Marathon is a Mesos framework for long running applications. Docker containers can be deployed via Marathon's REST API. To get the endpoint for Marathon, run the bay-show command and look for the property 'api_address'. Marathon's endpoint is port 8080 on this IP address, so the web console can be accessed at:
http://<api_address>:8080/
Refer to Marathon documentation for details on running applications.
For example, you can 'post' a JSON app description to
http://<api_address>:8080/apps
to deploy a Docker
container:
$ cat > app.json << END
{
"container": {
"type": "DOCKER",
"docker": {
"image": "libmesos/ubuntu"
}
},
"id": "ubuntu",
"instances": 1,
"cpus": 0.5,
"mem": 512,
"uris": [],
"cmd": "while sleep 10; do date -u +%T; done"
}
END
$ API_ADDRESS=$(magnum bay-show mesosbay | awk '/ api_address /{print $4}')
$ curl -X POST -H "Content-Type: application/json" \
http://${API_ADDRESS}:8080/v2/apps -d@app.json
Transport Layer Security
Magnum uses TLS to secure communication between a bay's services and the outside world. TLS is a complex subject, and many guides on it exist already. This guide will not attempt to fully describe TLS, but instead will only cover the necessary steps to get a client set up to talk to a Bay with TLS. A more in-depth guide on TLS can be found in the OpenSSL Cookbook by Ivan Ristić.
TLS is employed at 3 points in a bay:
- By Magnum to communicate with the bay API endpoint
- By the bay worker nodes to communicate with the master nodes
- By the end-user when they use the native client libraries to interact with the Bay. This applies to both a CLI or a program that uses a client for the particular bay. Each client needs a valid certificate to authenticate and communicate with a Bay.
The first two cases are implemented internally by Magnum and are not exposed to the users, while the last case involves the users and is described in more details below.
Deploying a secure bay
Current TLS support is summarized below:
COE | TLS support |
---|---|
Kubernetes | yes |
Swarm | yes |
Mesos | no |
For bay type with TLS support, e.g. Kubernetes and Swarm, TLS is enabled by default. To disable TLS in Magnum, you can specify the parameter '--tls-disabled' in the baymodel. Please note it is not recommended to disable TLS due to security reasons.
In the following example, Kubernetes is used to illustrate a secure bay, but the steps are similar for other bay types that have TLS support.
First, create a baymodel; by default TLS is enabled in Magnum, therefore it does not need to be specified via a parameter:
magnum baymodel-create --name secure-kubernetes \
--keypair-id default \
--external-network-id public \
--image-id fedora-atomic-latest \
--dns-nameserver 8.8.8.8 \
--flavor-id m1.small \
--docker-volume-size 3 \
--coe kubernetes \
--network-driver flannel
+-----------------------+--------------------------------------+
| Property | Value |
+-----------------------+--------------------------------------+
| insecure_registry | None |
| http_proxy | None |
| updated_at | None |
| master_flavor_id | None |
| uuid | 5519b24a-621c-413c-832f-c30424528b31 |
| no_proxy | None |
| https_proxy | None |
| tls_disabled | False |
| keypair_id | time4funkey |
| public | False |
| labels | {} |
| docker_volume_size | 5 |
| server_type | vm |
| external_network_id | public |
| cluster_distro | fedora-atomic |
| image_id | fedora-atomic-latest |
| volume_driver | None |
| registry_enabled | False |
| docker_storage_driver | devicemapper |
| apiserver_port | None |
| name | secure-kubernetes |
| created_at | 2016-07-25T23:09:50+00:00 |
| network_driver | flannel |
| fixed_network | None |
| coe | kubernetes |
| flavor_id | m1.small |
| dns_nameserver | 8.8.8.8 |
+-----------------------+--------------------------------------+
Now create a bay. Use the baymodel name as a template for bay creation:
magnum bay-create --name secure-k8sbay \
--baymodel secure-kubernetes \
--node-count 1
+--------------------+------------------------------------------------------------+
| Property | Value |
+--------------------+------------------------------------------------------------+
| status | CREATE_IN_PROGRESS |
| uuid | 3968ffd5-678d-4555-9737-35f191340fda |
| stack_id | c96b66dd-2109-4ae2-b510-b3428f1e8761 |
| status_reason | None |
| created_at | 2016-07-25T23:14:06+00:00 |
| updated_at | None |
| bay_create_timeout | 0 |
| api_address | None |
| baymodel_id | 5519b24a-621c-413c-832f-c30424528b31 |
| master_addresses | None |
| node_count | 1 |
| node_addresses | None |
| master_count | 1 |
| discovery_url | https://discovery.etcd.io/ba52a8178e7364d43a323ee4387cf28e |
| name | secure-k8sbay |
+--------------------+------------------------------------------------------------+
Now run bay-show command to get the details of the bay and verify that the api_address is 'https':
magnum bay-show secure-k8sbay
+--------------------+------------------------------------------------------------+
| Property | Value |
+--------------------+------------------------------------------------------------+
| status | CREATE_COMPLETE |
| uuid | 04952c60-a338-437f-a7e7-d016d1d00e65 |
| stack_id | b7bf72ce-b08e-4768-8201-e63a99346898 |
| status_reason | Stack CREATE completed successfully |
| created_at | 2016-07-25T23:14:06+00:00 |
| updated_at | 2016-07-25T23:14:10+00:00 |
| bay_create_timeout | 60 |
| api_address | https://192.168.19.86:6443 |
| baymodel_id | da2825a0-6d09-4208-b39e-b2db666f1118 |
| master_addresses | ['192.168.19.87'] |
| node_count | 1 |
| node_addresses | ['192.168.19.88'] |
| master_count | 1 |
| discovery_url | https://discovery.etcd.io/3b7fb09733429d16679484673ba3bfd5 |
| name | secure-k8sbay |
+--------------------+------------------------------------------------------------+
You can see the api_address contains https in the URL, showing that the Kubernetes services are configured securely with SSL certificates and now any communication to kube-apiserver will be over https.
Interfacing with a secure bay
To communicate with the API endpoint of a secure bay, you will need so supply 3 SSL artifacts:
- Your client key
- A certificate for your client key that has been signed by a Certificate Authority (CA)
- The certificate of the CA
There are two ways to obtain these 3 artifacts.
Automated
Magnum provides the command 'bay-config' to help the user in setting up the environment and artifacts for TLS, for example:
magnum bay-config swarmbay --dir mybayconfig
This will display the necessary environment variables, which you can add to your environment:
export DOCKER_HOST=tcp://172.24.4.5:2376
export DOCKER_CERT_PATH=mybayconfig
export DOCKER_TLS_VERIFY=True
And the artifacts are placed in the directory specified:
ca.pem
cert.pem
key.pem
You can now use the native client to interact with the COE. The variables and artifacts are unique to the bay.
The parameters for 'bay-config' are as follows:
- --dir <dirname>
-
Directory to save the certificate and config files.
- --force
-
Overwrite existing files in the directory specified.
Manual
You can create the key and certificates manually using the following steps.
- Client Key
-
Your personal private key is essentially a cryptographically generated string of bytes. It should be protected in the same manner as a password. To generate an RSA key, you can use the 'genrsa' command of the 'openssl' tool:
openssl genrsa -out key.pem 4096
This command generates a 4096 byte RSA key at key.pem.
- Signed Certificate
-
To authenticate your key, you need to have it signed by a CA. First generate the Certificate Signing Request (CSR). The CSR will be used by Magnum to generate a signed certificate that you will use to communicate with the Bay. To generate a CSR, openssl requires a config file that specifies a few values. Using the example template below, you can fill in the 'CN' value with your name and save it as client.conf:
$ cat > client.conf << END [req] distinguished_name = req_distinguished_name req_extensions = req_ext prompt = no [req_distinguished_name] CN = Your Name [req_ext] extendedKeyUsage = clientAuth END
Once you have client.conf, you can run the openssl 'req' command to generate the CSR:
openssl req -new -days 365 \ -config client.conf \ -key key.pem \ -out client.csr
Now that you have your client CSR, you can use the Magnum CLI to send it off to Magnum to get it signed:
magnum ca-sign --bay secure-k8sbay --csr client.csr > cert.pem
- Certificate Authority
-
The final artifact you need to retrieve is the CA certificate for the bay. This is used by your native client to ensure you are only communicating with hosts that Magnum set up:
magnum ca-show --bay secure-k8sbay > ca.pem
User Examples
Here are some examples for using the CLI on a secure Kubernetes and Swarm bay. You can perform all the TLS set up automatically by:
eval $(magnum bay-config <bay-name>)
Or you can perform the manual steps as described above and specify the TLS options on the CLI. The SSL artifacts are assumed to be saved in local files as follows:
- key.pem: your SSL key
- cert.pem: signed certificate
- ca.pem: certificate for bay CA
For Kubernetes, you need to get 'kubectl', a kubernetes CLI tool, to communicate with the bay:
wget https://github.com/kubernetes/kubernetes/releases/download/v1.2.0/kubernetes.tar.gz
tar -xzvf kubernetes.tar.gz
sudo cp -a kubernetes/platforms/linux/amd64/kubectl /usr/bin/kubectl
Now let's run some 'kubectl' commands to check the secure communication. If you used 'bay-config', then you can simply run the 'kubectl' command without having to specify the TLS options since they have been defined in the environment:
kubectl version
Client Version: version.Info{Major:"1", Minor:"0", GitVersion:"v1.2.0", GitCommit:"cffae0523cfa80ddf917aba69f08508b91f603d5", GitTreeState:"clean"}
Server Version: version.Info{Major:"1", Minor:"0", GitVersion:"v1.2.0", GitCommit:"cffae0523cfa80ddf917aba69f08508b91f603d5", GitTreeState:"clean"}
You can specify the TLS options manually as follows:
KUBERNETES_URL=$(magnum bay-show secure-k8sbay |
awk '/ api_address /{print $4}')
kubectl version --certificate-authority=ca.pem \
--client-key=key.pem \
--client-certificate=cert.pem -s $KUBERNETES_URL
kubectl create -f redis-master.yaml --certificate-authority=ca.pem \
--client-key=key.pem \
--client-certificate=cert.pem -s $KUBERNETES_URL
pods/test2
kubectl get pods --certificate-authority=ca.pem \
--client-key=key.pem \
--client-certificate=cert.pem -s $KUBERNETES_URL
NAME READY STATUS RESTARTS AGE
redis-master 2/2 Running 0 1m
Beside using the environment variables, you can also configure 'kubectl' to remember the TLS options:
kubectl config set-cluster secure-k8sbay --server=${KUBERNETES_URL} \
--certificate-authority=${PWD}/ca.pem
kubectl config set-credentials client --certificate-authority=${PWD}/ca.pem \
--client-key=${PWD}/key.pem --client-certificate=${PWD}/cert.pem
kubectl config set-context secure-k8sbay --cluster=secure-k8sbay --user=client
kubectl config use-context secure-k8sbay
Then you can use 'kubectl' commands without the certificates:
kubectl get pods
NAME READY STATUS RESTARTS AGE
redis-master 2/2 Running 0 1m
Access to Kubernetes User Interface:
curl -L ${KUBERNETES_URL}/ui --cacert ca.pem --key key.pem \
--cert cert.pem
You may also set up 'kubectl' proxy which will use your client certificates to allow you to browse to a local address to use the UI without installing a certificate in your browser:
kubectl proxy --api-prefix=/ --certificate-authority=ca.pem --client-key=key.pem \
--client-certificate=cert.pem -s $KUBERNETES_URL
You can then open http://localhost:8001/ui in your browser.
The examples for Docker are similar. With 'bay-config' set up, you can just run docker commands without TLS options. To specify the TLS options manually:
docker -H tcp://192.168.19.86:2376 --tlsverify \
--tlscacert ca.pem \
--tlskey key.pem \
--tlscert cert.pem \
info
Storing the certificates
Magnum generates and maintains a certificate for each bay so that it can also communicate securely with the bay. As a result, it is necessary to store the certificates in a secure manner. Magnum provides the following methods for storing the certificates and this is configured in /etc/magnum/magnum.conf in the section [certificates] with the parameter 'cert_manager_type'.
Barbican: Barbican is a service in OpenStack for storing secrets. It is used by Magnum to store the certificates when cert_manager_type is configured as:
cert_manager_type = barbican
This is the recommended configuration for a production environment. Magnum will interface with Barbican to store and retrieve certificates, delegating the task of securing the certificates to Barbican.
Magnum database: In some cases, a user may want an alternative to storing the certificates that does not require Barbican. This can be a development environment, or a private cloud that has been secured by other means. Magnum can store the certificates in its own database; this is done with the configuration:
cert_manager_type = x509keypair
This storage mode is only as secure as the controller server that hosts the database for the OpenStack services.
Local store: As another alternative that does not require Barbican, Magnum can simply store the certificates on the local host filesystem where the conductor is running, using the configuration:
cert_manager_type = local
Note that this mode is only supported when there is a single Magnum conductor running since the certificates are stored locally. The 'local' mode is not recommended for a production environment.
For the nodes, the certificates for communicating with the masters are stored locally and the nodes are assumed to be secured.
Networking
There are two components that make up the networking in a cluster.
- The Neutron infrastructure for the cluster: this includes the private network, subnet, ports, routers, load balancers, etc.
- The networking model presented to the containers: this is what the containers see in communicating with each other and to the external world. Typically this consists of a driver deployed on each node.
The two components are deployed and managed separately. The Neutron infrastructure is the integration with OpenStack; therefore, it is stable and more or less similar across different COE types. The networking model, on the other hand, is specific to the COE type and is still under active development in the various COE communities, for example, Docker libnetwork and Kubernetes Container Networking. As a result, the implementation for the networking models is evolving and new models are likely to be introduced in the future.
For the Neutron infrastructure, the following configuration can be set in the baymodel:
- external-network-id
-
The external Neutron network ID to connect to this bay. This is used to connect the cluster to the external internet, allowing the nodes in the bay to access external URL for discovery, image download, etc. If not specified, the default value is "public" and this is valid for a typical devstack.
- fixed-network
-
The Neutron network to use as the private network for the bay nodes. If not specified, a new Neutron private network will be created.
- dns-nameserver
-
The DNS nameserver to use for this bay. This is an IP address for the server and it is used to configure the Neutron subnet of the cluster (dns_nameservers). If not specified, the default DNS is 8.8.8.8, the publicly available DNS.
- http-proxy, https-proxy, no-proxy
-
The proxy for the nodes in the bay, to be used when the cluster is behind a firewall and containers cannot access URL's on the external internet directly. For the parameter http-proxy and https-proxy, the value to provide is a URL and it will be set in the environment variable HTTP_PROXY and HTTPS_PROXY respectively in the nodes. For the parameter no-proxy, the value to provide is an IP or list of IP's separated by comma. Likewise, the value will be set in the environment variable NO_PROXY in the nodes.
For the networking model to the container, the following configuration can be set in the baymodel:
- network-driver
-
The network driver name for instantiating container networks. Currently, the following network drivers are supported:
Driver Kubernetes Swarm Mesos Flannel supported supported unsupported Docker unsupported supported supported If not specified, the default driver is Flannel for Kubernetes, and Docker for Swarm and Mesos.
Particular network driver may require its own set of parameters for configuration, and these parameters are specified through the labels in the baymodel. Labels are arbitrary key=value pairs.
When Flannel is specified as the network driver, the following optional labels can be added:
- flannel_network_cidr
-
IPv4 network in CIDR format to use for the entire Flannel network. If not specified, the default is 10.100.0.0/16.
- flannel_network_subnetlen
-
The size of the subnet allocated to each host. If not specified, the default is 24.
- flannel_backend
-
The type of backend for Flannel. Possible values are udp, vxlan, host-gw. If not specified, the default is udp. Selecting the best backend depends on your networking. Generally, udp is the most generally supported backend since there is little requirement on the network, but it typically offers the lowest performance. The vxlan backend performs better, but requires vxlan support in the kernel so the image used to provision the nodes needs to include this support. The host-gw backend offers the best performance since it does not actually encapsulate messages, but it requires all the nodes to be on the same L2 network. The private Neutron network that Magnum creates does meet this requirement; therefore if the parameter fixed_network is not specified in the baymodel, host-gw is the best choice for the Flannel backend.
High Availability
To be filled in
Scaling
Performance tuning for periodic task
Magnum's periodic task performs a stack-get operation on the Heat stack underlying each of its bays. If you have a large amount of bays this can create considerable load on the Heat API. To reduce that load you can configure Magnum to perform one global stack-list per periodic task instead instead of one per bay. This is disabled by default, both from the Heat and Magnum side since it causes a security issue, though: any user in any tenant holding the admin role can perform a global stack-list operation if Heat is configured to allow it for Magnum. If you want to enable it nonetheless, proceed as follows:
Set periodic_global_stack_list in magnum.conf to True (False by default).
Update heat policy to allow magnum list stacks. To this end, edit your heat policy file, usually etc/heat/policy.json``:
... stacks:global_index: "rule:context_is_admin",
Now restart heat.
To be filled in Include auto scaling
Storage
Currently Cinder provides the block storage to the containers, and the storage is made available in two ways: as ephemeral storage and as persistent storage.
Ephemeral storage
The filesystem for the container consists of multiple layers from the image and a top layer that holds the modification made by the container. This top layer requires storage space and the storage is configured in the Docker daemon through a number of storage options. When the container is removed, the storage allocated to the particular container is also deleted.
To manage this space in a flexible manner independent of the Nova instance flavor, Magnum creates a separate Cinder block volume for each node in the bay, mounts it to the node and configures it to be used as ephemeral storage. Users can specify the size of the Cinder volume with the baymodel attribute 'docker-volume-size'. The default size is 5GB. Currently the block size is fixed at bay creation time, but future lifecycle operations may allow modifying the block size during the life of the bay.
To use the Cinder block storage, there is a number of Docker storage drivers available. Only 'devicemapper' is supported as the storage driver but other drivers such as 'OverlayFS' are being considered. There are important trade-off between the choices for the storage drivers that should be considered. For instance, 'OperlayFS' may offer better performance, but it may not support the filesystem metadata needed to use SELinux, which is required to support strong isolation between containers running in the same bay. Using the 'devicemapper' driver does allow the use of SELinux.
Persistent storage
In some use cases, data read/written by a container needs to persist so that it can be accessed later. To persist the data, a Cinder volume with a filesystem on it can be mounted on a host and be made available to the container, then be unmounted when the container exits.
Docker provides the 'volume' feature for this purpose: the user invokes the 'volume create' command, specifying a particular volume driver to perform the actual work. Then this volume can be mounted when a container is created. A number of third-party volume drivers support OpenStack Cinder as the backend, for example Rexray and Flocker. Magnum currently supports Rexray as the volume driver for Swarm and Mesos. Other drivers are being considered.
Kubernetes allows a previously created Cinder block to be mounted to a pod and this is done by specifying the block ID in the pod yaml file. When the pod is scheduled on a node, Kubernetes will interface with Cinder to request the volume to be mounted on this node, then Kubernetes will launch the Docker container with the proper options to make the filesystem on the Cinder volume accessible to the container in the pod. When the pod exits, Kubernetes will again send a request to Cinder to unmount the volume's filesystem, making it available to be mounted on other nodes.
Magnum supports these features to use Cinder as persistent storage using the baymodel attribute 'volume-driver' and the support matrix for the COE types is summarized as follows:
Driver | Kubernetes | Swarm | Mesos |
---|---|---|---|
cinder | supported | unsupported | unsupported |
rexray | unsupported | supported | supported |
Following are some examples for using Cinder as persistent storage.
Using Cinder in Kubernetes
NOTE: This feature requires Kubernetes version 1.1.1 or above and Docker version 1.8.3 or above. The public Fedora image from Atomic currently meets this requirement.
NOTE: The following steps are a temporary workaround, and Magnum's development team is working on a long term solution to automate these steps.
Create the baymodel.
Specify 'cinder' as the volume-driver for Kubernetes:
magnum baymodel-create --name k8sbaymodel \ --image-id fedora-23-atomic-7 \ --keypair-id testkey \ --external-network-id public \ --dns-nameserver 8.8.8.8 \ --flavor-id m1.small \ --docker-volume-size 5 \ --network-driver flannel \ --coe kubernetes \ --volume-driver cinder
Create the bay:
magnum bay-create --name k8sbay --baymodel k8sbaymodel --node-count 1
Configure kubelet.
To allow Kubernetes to interface with Cinder, log into each minion node of your bay and perform step 4 through 6:
sudo vi /etc/kubernetes/kubelet
Comment out the line:
#KUBELET_ARGS=--config=/etc/kubernetes/manifests --cadvisor-port=4194
Uncomment the line:
#KUBELET_ARGS="--config=/etc/kubernetes/manifests --cadvisor-port=4194 --cloud-provider=openstack --cloud-config=/etc/kubernetes/kube_openstack_config"
Enter OpenStack user credential:
sudo vi /etc/kubernetes/kube_openstack_config
The username, tenant-name and region entries have been filled in with the Keystone values of the user who created the bay. Enter the password of this user on the entry for password:
password=ChangeMe
Restart Kubernetes services:
sudo systemctl restart kubelet
On restart, the new configuration enables the Kubernetes cloud provider plugin for OpenStack, along with the necessary credential for kubelet to authenticate with Keystone and to make request to OpenStack services.
Install nsenter:
sudo docker run -v /usr/local/bin:/target jpetazzo/nsenter
The nsenter utility is used by Kubernetes to run new processes within existing kernel namespaces. This allows the kubelet agent to manage storage for pods.
Kubernetes is now ready to use Cinder for persistent storage. Following is an example illustrating how Cinder is used in a pod.
Create the cinder volume:
cinder create --display-name=test-repo 1 ID=$(cinder create --display-name=test-repo 1 | awk -F'|' '$2~/^[[:space:]]*id/ {print $3}')
The command will generate the volume with a ID. The volume ID will be specified in Step 2.
Create a pod in this bay and mount this cinder volume to the pod. Create a file (e.g nginx-cinder.yaml) describing the pod:
cat > nginx-cinder.yaml << END apiVersion: v1 kind: Pod metadata: name: aws-web spec: containers: - name: web image: nginx ports: - name: web containerPort: 80 hostPort: 8081 protocol: TCP volumeMounts: - name: html-volume mountPath: "/usr/share/nginx/html" volumes: - name: html-volume cinder: # Enter the volume ID below volumeID: $ID fsType: ext4 END
NOTE: The Cinder volume ID needs to be configured in the yaml file so the existing Cinder volume can be mounted in a pod by specifying the volume ID in the pod manifest as follows:
volumes:
- name: html-volume
cinder:
volumeID: $ID
fsType: ext4
Create the pod by the normal Kubernetes interface:
kubectl create -f nginx-cinder.yaml
You can start a shell in the container to check that the mountPath exists, and on an OpenStack client you can run the command 'cinder list' to verify that the cinder volume status is 'in-use'.
Using Cinder in Swarm
To be filled in
Using Cinder in Mesos
Create the baymodel.
Specify 'rexray' as the volume-driver for Mesos. As an option, you can specify in a label the attributes 'rexray_preempt' to enable any host to take control of a volume regardless if other hosts are using the volume. If this is set to false, the driver will ensure data safety by locking the volume:
magnum baymodel-create --name mesosbaymodel \ --image-id ubuntu-mesos \ --keypair-id testkey \ --external-network-id public \ --dns-nameserver 8.8.8.8 \ --master-flavor-id m1.magnum \ --docker-volume-size 4 \ --tls-disabled \ --flavor-id m1.magnum \ --coe mesos \ --volume-driver rexray \ --labels rexray-preempt=true
Create the Mesos bay:
magnum bay-create --name mesosbay --baymodel mesosbaymodel --node-count 1
Create the cinder volume and configure this bay:
cinder create --display-name=redisdata 1
Create the following file :
cat > mesos.json << END { "id": "redis", "container": { "docker": { "image": "redis", "network": "BRIDGE", "portMappings": [ { "containerPort": 80, "hostPort": 0, "protocol": "tcp"} ], "parameters": [ { "key": "volume-driver", "value": "rexray" }, { "key": "volume", "value": "redisdata:/data" } ] } }, "cpus": 0.2, "mem": 32.0, "instances": 1 } END
NOTE: When the Mesos bay is created using this baymodel, the Mesos bay will be configured so that a filesystem on an existing cinder volume can be mounted in a container by configuring the parameters to mount the cinder volume in the json file :
"parameters": [
{ "key": "volume-driver", "value": "rexray" },
{ "key": "volume", "value": "redisdata:/data" }
]
Create the container using Marathon REST API :
MASTER_IP=$(magnum bay-show mesosbay | awk '/ api_address /{print $4}') curl -X POST -H "Content-Type: application/json" \ http://${MASTER_IP}:8080/v2/apps -d@mesos.json
You can log into the container to check that the mountPath exists, and you can run the command 'cinder list' to verify that your cinder volume status is 'in-use'.
Image Management
When a COE is deployed, an image from Glance is used to boot the nodes in the cluster and then the software will be configured and started on the nodes to bring up the full cluster. An image is based on a particular distro such as Fedora, Ubuntu, etc, and is prebuilt with the software specific to the COE such as Kubernetes, Swarm, Mesos. The image is tightly coupled with the following in Magnum:
- Heat templates to orchestrate the configuration.
- Template definition to map baymodel parameters to Heat template parameters.
- Set of scripts to configure software.
Collectively, they constitute the driver for a particular COE and a particular distro; therefore, developing a new image needs to be done in conjunction with developing these other components. Image can be built by various methods such as diskimagebuilder, or in some case, a distro image can be used directly. A number of drivers and the associated images is supported in Magnum as reference implementation. In this section, we focus mainly on the supported images.
All images must include support for cloud-init and the heat software configuration utility:
- os-collect-config
- os-refresh-config
- os-apply-config
- heat-config
- heat-config-script
Additional software are described as follows.
Kubernetes on Fedora Atomic
This image can be downloaded from the public Atomic site or can be built locally using diskimagebuilder. Details can be found in the fedora-atomic element The image currently has the following OS/software:
OS/software | version |
---|---|
Fedora | 23 |
Docker | 1.9.1 |
Kubernetes | 1.2.0 |
etcd | 2.2.1 |
Flannel | 0.5.4 |
The following software are managed as systemd services:
- kube-apiserver
- kubelet
- etcd
- flannel (if specified as network driver)
- docker
The following software are managed as Docker containers:
- kube-controller-manager
- kube-scheduler
- kube-proxy
The login for this image is fedora.
Kubernetes on CoreOS
CoreOS publishes a stock image that is being used to deploy Kubernetes. This image has the following OS/software:
OS/software | version |
---|---|
CoreOS | 4.3.6 |
Docker | 1.9.1 |
Kubernetes | 1.0.6 |
etcd | 2.2.3 |
Flannel | 0.5.5 |
The following software are managed as systemd services:
- kubelet
- flannel (if specified as network driver)
- docker
- etcd
The following software are managed as Docker containers:
- kube-apiserver
- kube-controller-manager
- kube-scheduler
- kube-proxy
The login for this image is core.
Kubernetes on Ironic
This image is built manually using diskimagebuilder. The scripts and instructions are included in Magnum code repo. Currently Ironic is not fully supported yet, therefore more details will be provided when this driver has been fully tested.
Swarm on Fedora Atomic
This image is the same as the image for Kubernetes on Fedora Atomic described above. The login for this image is fedora.
Mesos on Ubuntu
This image is built manually using diskimagebuilder. The instructions are provided in the section Diskimage-builder. The Fedora site hosts the current image ubuntu-14.04.3-mesos-0.25.0.qcow2.
OS/software | version |
---|---|
Ubuntu | 14.04 |
Docker | 1.8.1 |
Mesos | 0.25.0 |
Marathon | 0.11.1 |
Notification
Magnum provides notifications about usage data so that 3rd party applications can use the data for auditing, billing, monitoring, or quota purposes. This document describes the current inclusions and exclusions for Magnum notifications.
Magnum uses Cloud Auditing Data Federation (CADF) Notification as its notification format for better support of auditing, details about CADF are documented below.
Auditing with CADF
Magnum uses the PyCADF library to emit CADF notifications, these events adhere to the DMTF CADF specification. This standard provides auditing capabilities for compliance with security, operational, and business processes and supports normalized and categorized event data for federation and aggregation.
Below table describes the event model components and semantics for each component:
model component | CADF Definition |
---|---|
OBSERVER |
|
INITIATOR |
|
ACTION |
|
TARGET |
|
OUTCOME |
|
The payload
portion of a CADF Notification is a CADF
event
, which is represented as a JSON dictionary. For
example:
{"typeURI": "http://schemas.dmtf.org/cloud/audit/1.0/event",
"initiator": {
"typeURI": "service/security/account/user",
"host": {
"agent": "curl/7.22.0(x86_64-pc-linux-gnu)",
"address": "127.0.0.1"
,
}"id": "<initiator_id>"
,
}"target": {
"typeURI": "<target_uri>",
"id": "openstack:1c2fc591-facb-4479-a327-520dade1ea15"
,
}"observer": {
"typeURI": "service/security",
"id": "openstack:3d4a50a9-2b59-438b-bf19-c231f9c7625a"
,
}"eventType": "activity",
"eventTime": "2014-02-14T01:20:47.932842+00:00",
"action": "<action>",
"outcome": "success",
"id": "openstack:f5352d7b-bee6-4c22-8213-450e7b646e9f",
}
Where the following are defined:
<initiator_id>
: ID of the user that performed the operation<target_uri>
: CADF specific target URI, (i.e.: data/security/project)<action>
: The action being performed, typically:<operation>
.<resource_type>
Additionally there may be extra keys present depending on the operation being performed, these will be discussed below.
Note, the eventType
property of the CADF payload is
different from the event_type
property of a notifications.
The former (eventType
) is a CADF keyword which designates
the type of event that is being measured, this can be: activity, monitor or control. Whereas the latter
(event_type
) is described in previous sections as: magnum.<resource_type>.<operation>
Supported Events
The following table displays the corresponding relationship between resource types and operations.
resource type | supported operations | typeURI |
---|---|---|
bay |
|
|
Example Notification - Bay Create
The following is an example of a notification that is sent when a bay
is created. This example can be applied for any create
,
update
or delete
event that is seen in the
table above. The <action>
and typeURI
fields will be change.
{"event_type": "magnum.bay.created",
"message_id": "0156ee79-b35f-4cef-ac37-d4a85f231c69",
"payload": {
"typeURI": "http://schemas.dmtf.org/cloud/audit/1.0/event",
"initiator": {
"typeURI": "service/security/account/user",
"id": "c9f76d3c31e142af9291de2935bde98a",
"user_id": "0156ee79-b35f-4cef-ac37-d4a85f231c69",
"project_id": "3d4a50a9-2b59-438b-bf19-c231f9c7625a"
,
}"target": {
"typeURI": "service/magnum/bay",
"id": "openstack:1c2fc591-facb-4479-a327-520dade1ea15"
,
}"observer": {
"typeURI": "service/magnum/bay",
"id": "openstack:3d4a50a9-2b59-438b-bf19-c231f9c7625a"
,
}"eventType": "activity",
"eventTime": "2015-05-20T01:20:47.932842+00:00",
"action": "create",
"outcome": "success",
"id": "openstack:f5352d7b-bee6-4c22-8213-450e7b646e9f",
"resource_info": "671da331c47d4e29bb6ea1d270154ec3"
}"priority": "INFO",
"publisher_id": "magnum.host1234",
"timestamp": "2016-05-20 15:03:45.960280"
}