openstack/manila
Code Issues Proposed changes
25d3306f9f
manila/doc/source/install/index.rst
junboli cca65cb088 Fix the incorrect reference links 
TrivialFix
[1] is the installation guide for OpenStack components, and [2]
is the installation guide for manila, obviously, we need [1] in
the docs.

[1] https://docs.openstack.org/latest/install/
[2] https://docs.openstack.org/manila/latest/install/index.html

Change-Id: I53dc68b1ca13c18423e0c1c5d381faa72982e20b
2018-02-26 09:24:40 +08:00

2.7 KiB
Raw Blame History

Installation Tutorial

get-started-with-shared-file-systems.rst install-controller-node.rst install-share-node.rst verify.rst post-install.rst next-steps.rst

The OpenStack Shared File Systems service (manila) provides coordinated access to shared or distributed file systems. The method in which the share is provisioned and consumed is determined by the Shared File Systems driver, or drivers in the case of a multi-backend configuration. There are a variety of drivers that support NFS, CIFS, HDFS, GlusterFS, CEPHFS, MAPRFS and other protocols as well.

The Shared File Systems API and scheduler services typically run on the controller nodes. Depending upon the drivers used, the share service can run on controllers, compute nodes, or storage nodes.

Important

For simplicity, this guide describes configuring the Shared File Systems service to use one of either:

  • the generic back end with the driver_handles_share_servers mode (DHSS) enabled that uses the Compute service (nova), Image service (glance), Networking service (neutron) and Block storage service (cinder); or,
  • the LVM back end with driver_handles_share_servers mode (DHSS) disabled.

The storage protocol used and referenced in this guide is NFS. As stated above, the Shared File System service supports different storage protocols depending on the back end chosen.

For the generic back end, networking service configuration requires the capability of networks being attached to a public router in order to create share networks. If using this back end, ensure that Compute, Networking and Block storage services are properly working before you proceed. For networking service, ensure that option 2 (deploying the networking service with support for self-service networks) is properly configured.

This installation tutorial also assumes that installation and configuration of OpenStack packages, Network Time Protocol, database engine and message queue has been completed as per the instructions in the OpenStack Installation Guide.. The Identity Service (keystone) has to be pre-configured with suggested client environment scripts.

For more information on various Shared File Systems storage back ends, see the Shared File Systems Configuration Reference..

To learn more about installation dependencies noted above, see the OpenStack Installation Guide.