12 KiB

Raw Blame History

OVS agent: Use python binding instead of ovs-ofctl command

https://blueprints.launchpad.net/neutron/+spec/ovs-ofctl-to-python

Problem Description

OVS agent uses ovs-ofctl command to program flow. it works but has some drawbacks:

Involves high overhead; same as ovs-vsctl described in other blueprint¹.
Difficult or impossible to handle OpenFlow async messages; async messsages are useful for monitoring switch state changes like port additions and removals².

Proposed Change

Instead of invoking ovs-ofctl each times, use OpenFlow python library ("Ryu ofproto library"³) provided by Ryu SDN Framework ("Ryu"⁴) to program OVS. This approach was taken for ofagent⁵ and proved to work.

Plan:

Turn the existing code which uses ovs-ofctl into a driver ⁶

Introduce Ryu-based driver⁷ as a non-default option.

Maintain both of drivers for a while. (one release cycle?) It would need Experimental/non-voting jenkins jobs to cover the non-default driver. Looking the result of the jobs, once the Ryu-based driver gets reasonably stable, consider to switch the default.

Deprecate ovs-ofctl driver later

Implementation details:

OpenFlow version
- OVS agent currently uses OpenFlow 1.0. The new Ryu-based driver will use OpenFlow 1.3 for reasons mentioned below. ovs-ofctl based driver will keep using OpenFlow 1.0 with the exactly same flows as it currently uses.
- OpenFlow 1.3 provides some features possibly useful for OVS agent. For example, ofagent uses metadata to implement "local vlan" isolation. OVS agent can do the same.
- Ryu ofproto library API for OpenFlow 1.0 is not sophisticated compared to later versions like OpenFlow 1.3. It works well, but only provides older unsophisticated API⁸.
- OpenFlow 1.3 works well with the recent versions of Open vSwitch. Open vSwitch v2.0.0 introduced OpenFlow 1.3 support and Open vSwitch v2.3.0 enabled it by default.
- OVS-agent itself configures the switch to use the appropriate OpenFlow version. There's no need for extra operator investigations.
Open vSwitch version in distributions:
- Ubuntu 14.04 LTS has Open vSwitch v2.0.1⁹. ofagent, which uses OpenFlow 1.3, uses that version for both of development and CI. It works well¹⁰.
- RHEL-OSP uses Open vSwitch 2.1.2 for Juno release.
- Fedora 20 has Open vSwitch 2.3.0.
XenAPI:
- XenAPI Integration needs updates.
- Currently OVS agent uses a special rootwrap¹¹ ¹² to proxy ovs-ofctl/ovs-vsctl requests from neutron node to dom0. This proposal replaces the use of ovs-ofctl. This proposal doesn't change ovs-vsctl part.
- As we can assume IP reachability between neutron node and dom0 ¹³ , a simple set-controller to teach OVS the IP address of the corresponding neutron node (thus the embedded OpenFlow controller) should be enough.
- OVS-agent will have a new option to specify the address and port to listen for OpenFlow connections.
Nicira extensions (NX)
- Currently OVS agent uses Nicira extensions for OpenFlow 1.0 in a several places. Even with OpenFlow 1.3, some of them still need the extensions.
- The following is a list of Nicira extensions used by OVS agent. Ryu>=3.18 supports all of them.
  - Learn action
  - Local ARP responder uses Nicira extensions heavily:
    
    Load
    
    Move
    
    NXM_NX_ARP_SHA
    
    NXM_NX_ARP_THA
    
    For longer term, probably it might be cleaner to replace it with ofagent's packet-in based implementation entirely. In that way, there's no need to use Nicira extensions.
  - The following Nicira extensions will be replaced by OpenFlow 1.3 native equivalents.
    
    Tunnel support
    
    Resubmit and tables
OpenFlow channel establishment
- Currently, on each invocation, ovs-ofctl command connects to the switch via unix domain socket. Instead, this blueprint proposes to make OVS agent listen on a local TCP port, e.g. 127.0.0.1:6633, and wait for the switch to connect to that port. TCP is the typical transport for an OpenFlow channel and removes a need of rootwrap. It's the same as how ofagent currently works.
- To make the above work, the switch needs to be configured to connect to that port. OVS agent itself can configure the switch accordingly by accessing ovsdb on startup.

Example of typical code changes

Current code:

br.add_flow(priority=2,
            in_port=in_port,
            actions="output:%s" % out_port)

With Ryu:

match = ofpp.OFPMatch(in_port=in_port)
actions = [ ofpp.OFPActionOutput(port=out_port) ]
instructions = [
    ofpp.OFPInstructionActions(ofp.OFPIT_APPLY_ACTIONS,
                               actions)
]
msg = ofpp.OFPFlowMod(dp,
                      priority=2,
                      match=match,
                      instructions=instructions])
self.send_msg(msg)

As you see, Ryu version is a straightforward representation of OpenFlow protocol.

Alternatives

Instead of making OVS agent switch to OpenFlow 1.3, improve Ryu's OpenFlow 1.0 support. This would minimize changes in neutron. This isn't an attractive option though, given the limited functionality of OpenFlow 1.0.
Fold ofagent into OVS agent. It would bring in some additional ofagent improvements including drastic flow table design changes¹⁴ and packet-in based local arp responder¹⁵. If we want to merge these agents in a long term keeping ofagent's "avoid OVS-specific features as far as reasonable" property, this option would be the most straightforward and minimize the total amount of work a lot. If we go this route, probably the appropriate steps would be:
- Port lacking features like DVR, canary table, etc to ofagent
- Assuming it's more important to keep compatibility for OVS-agent (right?), resurrect features which was removed in ofagent. (br-ex support etc)
- Once ofagent has feature parity, replace OVS-agent with it.

Data Model Impact

none

REST API Impact

none

Security Impact

A local user on the node would be able to connect to the OpenFlow port on which the agent listening and try to confuse the agent. It isn't a problem as the local management network is considered safe, though.

The OpenFlow channel can be protected using TLS if desirable. Both of Open vSwitch and Ryu support TLS¹⁶. In that case, we need to introduce some agent options to specify certs.

Notifications Impact

none

Other End User Impact

none

Performance Impact

Per FlowMod overhead would be smaller than rootwrap and ovs-ofctl command.

IPv6 Impact

none

Other Deployer Impact

Ryu SDN Framework will be required for OVS agent to work:

The latest version can be pulled via pip.
Ryu and its (non-optional) required packages are mostly pure-python ¹⁷. A few exceptions like eventlet are already covered by Neutron itself.
Debian and Ubuntu have official packages too ¹⁸ ¹⁹. However, Ryu version newer than the packages will likely be necessary for the Nicira extension support mentioned in "Proposed Changes" section.
It isn't packaged for Fedora Rawhide yet.

Developer Impact

Developers of OVS agent need to be familiar with Ryu ofproto library API, instead of ovs-ofctl command flow syntax.

Community Impact

none

Implementation

Assignee(s)

Primary assignee:: yamamoto
Other contributors:: kakuma

Work Items

See "Proposed Change" section.

Dependencies

none

Testing

Update and improve the existing tests if necessary.

Ryu SDN Framework will be required for gate jobs.

Experimental/non-voting jobs for the new driver will be needed.

Tempest Tests

The existing tempest tests should work as-is.

Functional Tests

Update and improve the existing tests if necessary.

There's an on-going effort for functional tests for drivers ²⁰ . Suggestions are welcome.

API Tests

none

Documentation Impact

User Documentation

A new option to specify address/port to listen for OpenFlow connections needs to be documented. It will be used by XenAPI integration.

If we want to support other transports like TLS, more options will be needed:

The option to specify the transport
Transport specific parameters. E.g. certs for TLS

Developer Documentation

It's nice to have a documentation on how to debug OpenFlow flows. Some notes:

Even after switching to the proposed Ryu-based driver, you can keep using ovs-ofctl command etc for debugging purposes as of today.
Ryu has a functionality to JSON-serialize OpenFlow messages ²¹ . It might be useful for logging purposes.

12 KiB Raw Blame History

OVS agent: Use python binding instead of ovs-ofctl command

Problem Description

Proposed Change

Alternatives

Data Model Impact

REST API Impact

Security Impact

Notifications Impact

Other End User Impact

Performance Impact

IPv6 Impact

Other Deployer Impact

Developer Impact

Community Impact

Implementation

Assignee(s)

Work Items

Dependencies

Testing

Tempest Tests

Functional Tests

API Tests

Documentation Impact

User Documentation

Developer Documentation

References

12 KiB

Raw Blame History