c613ede9fa
This change is needed for enabling floating IP's on routed networks. To be able to create a subnet that spans all segments of a routed network, a special subnet service type of 'network:routed' is used to denote a network that can span all segments of a routed network. To create floating IP's on a routed network, the subnet must be created with a service_type of 'network:routed'. After the subnet has been created, floating IP's can be allocated and associated as before. See the design spec https://review.opendev.org/#/c/486450/ for reference. One caveat for this approach is that it requires the underlying infrastructure to be aware of and able to route /32 host routes for the floating IP. This implies that in practice, use of the 'network:routed' service type should be done in conjunction with one or both of the following: 1. Third-party SDN backend that handles this service type in its own way 2. neutron-dynamic-routing and the BGP service plugin for announcing the appropriate next-hops for floating IP's. This is compatible with DVR and non-DVR environments. Depends-On: Ibde33bdacba6bd1e9c41cc69d0054bf55e1e6454 Change-Id: I9ae9d193b885364d5a4d90538880d8e9fbc8df74 Co-Author: Thomas Goirand <zigo@debian.org> Partial-Bug: #1667329
896 B
896 B
Configuration
config-services-agent config-ml2 config-address-scopes config-auto-allocation config-az config-bgp-dynamic-routing config-dhcp-ha config-dns-int config-dns-int-ext-serv config-dns-res config-dvr-ha-snat config-fip-port-forwardings config-ipam config-ipv6 config-logging config-macvtap config-mtu config-network-segment-ranges config-ovs-dpdk config-ovs-offload config-ovsfwdriver config-qos config-qos-min-bw config-rbac config-routed-networks config-sfc config-sriov config-subnet-pools config-subnet-onboard config-service-subnets config-bgp-floating-ip-over-l2-segmented-network config-trunking config-wsgi
Note
For general configuration, see the Configuration Reference.