neutron/doc/source/install/controller-install-option2-rdo.rst
YAMAMOTO Takashi 1df7e4bc46 doc: Remove stale references to external_network_bridge
This is a leftover of https://review.opendev.org/#/c/395568/ .

Closes-Bug: #1844171
Change-Id: I99e45b78a5b56601f02c9e3c09b621c4d3b67de3
2019-09-17 22:19:19 +09:00

361 lines
9.1 KiB
ReStructuredText

Networking Option 2: Self-service networks
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Install and configure the Networking components on the *controller* node.
Install the components
----------------------
.. code-block:: console
# yum install openstack-neutron openstack-neutron-ml2 \
openstack-neutron-linuxbridge ebtables
.. end
Configure the server component
------------------------------
* Edit the ``/etc/neutron/neutron.conf`` file and complete the following
actions:
* In the ``[database]`` section, configure database access:
.. path /etc/neutron/neutron.conf
.. code-block:: ini
[database]
# ...
connection = mysql+pymysql://neutron:NEUTRON_DBPASS@controller/neutron
.. end
Replace ``NEUTRON_DBPASS`` with the password you chose for the
database.
.. note::
Comment out or remove any other ``connection`` options in the
``[database]`` section.
* In the ``[DEFAULT]`` section, enable the Modular Layer 2 (ML2)
plug-in, router service, and overlapping IP addresses:
.. path /etc/neutron/neutron.conf
.. code-block:: ini
[DEFAULT]
# ...
core_plugin = ml2
service_plugins = router
allow_overlapping_ips = true
.. end
* In the ``[DEFAULT]`` section, configure ``RabbitMQ``
message queue access:
.. path /etc/neutron/neutron.conf
.. code-block:: ini
[DEFAULT]
# ...
transport_url = rabbit://openstack:RABBIT_PASS@controller
.. end
Replace ``RABBIT_PASS`` with the password you chose for the
``openstack`` account in RabbitMQ.
* In the ``[DEFAULT]`` and ``[keystone_authtoken]`` sections, configure
Identity service access:
.. path /etc/neutron/neutron.conf
.. code-block:: ini
[DEFAULT]
# ...
auth_strategy = keystone
[keystone_authtoken]
# ...
www_authenticate_uri = http://controller:5000
auth_url = http://controller:5000
memcached_servers = controller:11211
auth_type = password
project_domain_name = default
user_domain_name = default
project_name = service
username = neutron
password = NEUTRON_PASS
.. end
Replace ``NEUTRON_PASS`` with the password you chose for the ``neutron``
user in the Identity service.
.. note::
Comment out or remove any other options in the
``[keystone_authtoken]`` section.
* In the ``[DEFAULT]`` and ``[nova]`` sections, configure Networking to
notify Compute of network topology changes:
.. path /etc/neutron/neutron.conf
.. code-block:: ini
[DEFAULT]
# ...
notify_nova_on_port_status_changes = true
notify_nova_on_port_data_changes = true
[nova]
# ...
auth_url = http://controller:5000
auth_type = password
project_domain_name = default
user_domain_name = default
region_name = RegionOne
project_name = service
username = nova
password = NOVA_PASS
.. end
Replace ``NOVA_PASS`` with the password you chose for the ``nova``
user in the Identity service.
* In the ``[oslo_concurrency]`` section, configure the lock path:
.. path /etc/neutron/neutron.conf
.. code-block:: ini
[oslo_concurrency]
# ...
lock_path = /var/lib/neutron/tmp
.. end
Configure the Modular Layer 2 (ML2) plug-in
-------------------------------------------
The ML2 plug-in uses the Linux bridge mechanism to build layer-2 (bridging
and switching) virtual networking infrastructure for instances.
* Edit the ``/etc/neutron/plugins/ml2/ml2_conf.ini`` file and complete the
following actions:
* In the ``[ml2]`` section, enable flat, VLAN, and VXLAN networks:
.. path /etc/neutron/plugins/ml2/ml2_conf.ini
.. code-block:: ini
[ml2]
# ...
type_drivers = flat,vlan,vxlan
.. end
* In the ``[ml2]`` section, enable VXLAN self-service networks:
.. path /etc/neutron/plugins/ml2/ml2_conf.ini
.. code-block:: ini
[ml2]
# ...
tenant_network_types = vxlan
.. end
* In the ``[ml2]`` section, enable the Linux bridge and layer-2 population
mechanisms:
.. path /etc/neutron/plugins/ml2/ml2_conf.ini
.. code-block:: ini
[ml2]
# ...
mechanism_drivers = linuxbridge,l2population
.. end
.. warning::
After you configure the ML2 plug-in, removing values in the
``type_drivers`` option can lead to database inconsistency.
.. note::
The Linux bridge agent only supports VXLAN overlay networks.
* In the ``[ml2]`` section, enable the port security extension driver:
.. path /etc/neutron/plugins/ml2/ml2_conf.ini
.. code-block:: ini
[ml2]
# ...
extension_drivers = port_security
.. end
* In the ``[ml2_type_flat]`` section, configure the provider virtual
network as a flat network:
.. path /etc/neutron/plugins/ml2/ml2_conf.ini
.. code-block:: ini
[ml2_type_flat]
# ...
flat_networks = provider
.. end
* In the ``[ml2_type_vxlan]`` section, configure the VXLAN network identifier
range for self-service networks:
.. path /etc/neutron/plugins/ml2/ml2_conf.ini
.. code-block:: ini
[ml2_type_vxlan]
# ...
vni_ranges = 1:1000
.. end
* In the ``[securitygroup]`` section, enable ipset to increase
efficiency of security group rules:
.. path /etc/neutron/plugins/ml2/ml2_conf.ini
.. code-block:: ini
[securitygroup]
# ...
enable_ipset = true
.. end
Configure the Linux bridge agent
--------------------------------
The Linux bridge agent builds layer-2 (bridging and switching) virtual
networking infrastructure for instances and handles security groups.
* Edit the ``/etc/neutron/plugins/ml2/linuxbridge_agent.ini`` file and
complete the following actions:
* In the ``[linux_bridge]`` section, map the provider virtual network to the
provider physical network interface:
.. path /etc/neutron/plugins/ml2/linuxbridge_agent.ini
.. code-block:: ini
[linux_bridge]
physical_interface_mappings = provider:PROVIDER_INTERFACE_NAME
.. end
Replace ``PROVIDER_INTERFACE_NAME`` with the name of the underlying
provider physical network interface. See :doc:`environment-networking-rdo`
for more information.
* In the ``[vxlan]`` section, enable VXLAN overlay networks, configure the
IP address of the physical network interface that handles overlay
networks, and enable layer-2 population:
.. path /etc/neutron/plugins/ml2/linuxbridge_agent.ini
.. code-block:: ini
[vxlan]
enable_vxlan = true
local_ip = OVERLAY_INTERFACE_IP_ADDRESS
l2_population = true
.. end
Replace ``OVERLAY_INTERFACE_IP_ADDRESS`` with the IP address of the
underlying physical network interface that handles overlay networks. The
example architecture uses the management interface to tunnel traffic to
the other nodes. Therefore, replace ``OVERLAY_INTERFACE_IP_ADDRESS`` with
the management IP address of the controller node. See
:doc:`environment-networking-rdo` for more information.
* In the ``[securitygroup]`` section, enable security groups and
configure the Linux bridge iptables firewall driver:
.. path /etc/neutron/plugins/ml2/linuxbridge_agent.ini
.. code-block:: ini
[securitygroup]
# ...
enable_security_group = true
firewall_driver = neutron.agent.linux.iptables_firewall.IptablesFirewallDriver
.. end
* Ensure your Linux operating system kernel supports network bridge filters
by verifying all the following ``sysctl`` values are set to ``1``:
.. code-block:: ini
net.bridge.bridge-nf-call-iptables
net.bridge.bridge-nf-call-ip6tables
.. end
To enable networking bridge support, typically the ``br_netfilter`` kernel
module needs to be loaded. Check your operating system's documentation for
additional details on enabling this module.
Configure the layer-3 agent
---------------------------
The Layer-3 (L3) agent provides routing and NAT services for
self-service virtual networks.
* Edit the ``/etc/neutron/l3_agent.ini`` file and complete the following
actions:
* In the ``[DEFAULT]`` section, configure the Linux bridge interface driver:
.. path /etc/neutron/l3_agent.ini
.. code-block:: ini
[DEFAULT]
# ...
interface_driver = linuxbridge
.. end
Configure the DHCP agent
------------------------
The DHCP agent provides DHCP services for virtual networks.
* Edit the ``/etc/neutron/dhcp_agent.ini`` file and complete the following
actions:
* In the ``[DEFAULT]`` section, configure the Linux bridge interface driver,
Dnsmasq DHCP driver, and enable isolated metadata so instances on provider
networks can access metadata over the network:
.. path /etc/neutron/dhcp_agent.ini
.. code-block:: ini
[DEFAULT]
# ...
interface_driver = linuxbridge
dhcp_driver = neutron.agent.linux.dhcp.Dnsmasq
enable_isolated_metadata = true
.. end
Return to *Networking controller node configuration*.