openstack/neutron
Code Issues Proposed changes
67f36f0c5c
neutron/doc/source/install/environment-networking-controller-obs.rst
chenxing d19c7e7d59 import installation guide pages from openstack-manuals 
Co-Authored-By: Akihiro Motoki <amotoki@gmail.com>
Change-Id: Id8057d229add4daf3093d362eab7614685fdb8ac
2017-07-06 04:21:51 +09:00

935 B
Raw Blame History

Controller node

Configure network interfaces

  1. Configure the first interface as the management interface:

    IP address: 10.0.0.11

    Network mask: 255.255.255.0 (or /24)

    Default gateway: 10.0.0.1

  2. The provider interface uses a special configuration without an IP address assigned to it. Configure the second interface as the provider interface:

    Replace INTERFACE_NAME with the actual interface name. For example, eth1 or ens224.

  • Edit the /etc/sysconfig/network/ifcfg-INTERFACE_NAME file to contain the following:

    STARTMODE='auto'
BOOTPROTO='static'
  1. Reboot the system to activate the changes.

Configure name resolution

  1. Set the hostname of the node to controller.