neutron/doc/source/install/environment-networking-controller-ubuntu.rst
chenxing d19c7e7d59 import installation guide pages from openstack-manuals
Co-Authored-By: Akihiro Motoki <amotoki@gmail.com>
Change-Id: Id8057d229add4daf3093d362eab7614685fdb8ac
2017-07-06 04:21:51 +09:00

1021 B

Controller node

Configure network interfaces

  1. Configure the first interface as the management interface:

    IP address: 10.0.0.11

    Network mask: 255.255.255.0 (or /24)

    Default gateway: 10.0.0.1

  2. The provider interface uses a special configuration without an IP address assigned to it. Configure the second interface as the provider interface:

    Replace INTERFACE_NAME with the actual interface name. For example, eth1 or ens224.

  • Edit the /etc/network/interfaces file to contain the following:

    # The provider network interface
    auto INTERFACE_NAME
    iface INTERFACE_NAME inet manual
    up ip link set dev $IFACE up
    down ip link set dev $IFACE down
  1. Reboot the system to activate the changes.

Configure name resolution

  1. Set the hostname of the node to controller.