neutron/doc/source/install/environment-networking-cont...

45 lines
935 B
ReStructuredText

Controller node
~~~~~~~~~~~~~~~
Configure network interfaces
----------------------------
#. Configure the first interface as the management interface:
IP address: 10.0.0.11
Network mask: 255.255.255.0 (or /24)
Default gateway: 10.0.0.1
#. The provider interface uses a special configuration without an IP
address assigned to it. Configure the second interface as the provider
interface:
Replace ``INTERFACE_NAME`` with the actual interface name. For example,
*eth1* or *ens224*.
* Edit the ``/etc/sysconfig/network/ifcfg-INTERFACE_NAME`` file to
contain the following:
.. path /etc/sysconfig/network/ifcfg-INTERFACE_NAME
.. code-block:: ini
STARTMODE='auto'
BOOTPROTO='static'
.. end
#. Reboot the system to activate the changes.
Configure name resolution
-------------------------
#. Set the hostname of the node to ``controller``.
#. .. include:: shared/edit_hosts_file.txt