neutron/doc/source/install/environment-networking-cont...

47 lines
1021 B
ReStructuredText

Controller node
~~~~~~~~~~~~~~~
Configure network interfaces
----------------------------
#. Configure the first interface as the management interface:
IP address: 10.0.0.11
Network mask: 255.255.255.0 (or /24)
Default gateway: 10.0.0.1
#. The provider interface uses a special configuration without an IP
address assigned to it. Configure the second interface as the provider
interface:
Replace ``INTERFACE_NAME`` with the actual interface name. For example,
*eth1* or *ens224*.
* Edit the ``/etc/network/interfaces`` file to contain the following:
.. path /etc/network/interfaces
.. code-block:: bash
# The provider network interface
auto INTERFACE_NAME
iface INTERFACE_NAME inet manual
up ip link set dev $IFACE up
down ip link set dev $IFACE down
.. end
#. Reboot the system to activate the changes.
Configure name resolution
-------------------------
#. Set the hostname of the node to ``controller``.
#. .. include:: shared/edit_hosts_file.txt