[docs] Add network config example for test and prod
Change-Id: Id390253a9f2e081376b3dab04d6966870bcfff7b Closes-Bug: #1631321
This commit is contained in:
npraveen35
Jesse Pretorius (odyssey4me)
parent
2252d17c40
commit
5686c70033
@ -29,7 +29,7 @@ A production environment has the following characteristics:
|
||||
Network configuration
|
||||
~~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
.. literalinclude:: ../../../etc/network/interfaces.d/openstack_interface.cfg.example
|
||||
.. literalinclude:: ../../../etc/network/interfaces.d/openstack_interface.cfg.prod.example
|
||||
|
||||
Environment configuration
|
||||
~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
@ -25,7 +25,7 @@ A test environment has the following characteristics:
|
||||
Network configuration
|
||||
~~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
.. TBD
|
||||
.. literalinclude:: ../../../etc/network/interfaces.d/openstack_interface.cfg.test.example
|
||||
|
||||
Environment configuration
|
||||
~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
@ -1,123 +0,0 @@
|
||||
## The default networking requires several bridges. These bridges were named to be informative
|
||||
## however they can be named what ever you like and is adaptable to any network infrastructure
|
||||
## environment. This file serves as an example of how to setup basic networking and was ONLY
|
||||
## built for the purpose of being an example.
|
||||
|
||||
# EXAMPLE INTERFACE FILE
|
||||
# 1293 - HOST_NET (Ignore This. It's the native VLAN.)
|
||||
# 2176 - CONTAINER_NET
|
||||
# 1998 - OVERLAY_NET
|
||||
# 2144 - STORAGE_NET
|
||||
# 2146 - GATEWAY_NET (VM Provider Network. Ignore this. OpenStack will tag for us.)
|
||||
|
||||
## Physical interface, could be bond. This only needs to be set once for the physical device
|
||||
auto eth0
|
||||
iface eth0 inet manual
|
||||
bond-master bond0
|
||||
bond-primary eth0
|
||||
|
||||
auto eth1
|
||||
iface eth1 inet manual
|
||||
bond-master bond1
|
||||
bond-primary eth1
|
||||
|
||||
auto eth2
|
||||
iface eth2 inet manual
|
||||
bond-master bond0
|
||||
|
||||
auto eth3
|
||||
iface eth3 inet manual
|
||||
bond-master bond1
|
||||
|
||||
auto eth4
|
||||
iface eth4 inet manual
|
||||
|
||||
|
||||
## Create a bonded interface. Note that the "bond-slaves" is set to none. This is because the
|
||||
# bond-master has already been set in the raw interfaces for the new bond0.
|
||||
auto bond0
|
||||
iface bond0 inet static
|
||||
bond-slaves none
|
||||
bond-mode active-backup
|
||||
bond-miimon 100
|
||||
bond-downdelay 200
|
||||
bond-updelay 200
|
||||
address 10.240.0.100
|
||||
netmask 255.255.252.0
|
||||
gateway 10.240.0.1
|
||||
dns-nameservers 69.20.0.164 69.20.0.196
|
||||
|
||||
auto bond1
|
||||
iface bond1 inet manual
|
||||
bond-slaves none
|
||||
bond-mode active-backup
|
||||
bond-miimon 100
|
||||
bond-downdelay 250
|
||||
bond-updelay 250
|
||||
|
||||
|
||||
## Vlan tagged interface, this should be physical interface along with the vlan tag
|
||||
# The vlan tag number should reflect your already setup vlans.
|
||||
|
||||
#STORAGE_NET
|
||||
iface bond0.2144 inet manual
|
||||
vlan-raw-device bond0
|
||||
|
||||
#CONTAINER_NET
|
||||
iface bond0.2176 inet manual
|
||||
vlan-raw-device bond0
|
||||
|
||||
#OVERLAY_NET
|
||||
iface bond1.1998 inet manual
|
||||
vlan-raw-device bond1
|
||||
|
||||
|
||||
## Required network bridges; br-vlan, br-vxlan, br-mgmt.
|
||||
# Bridge for management network
|
||||
auto br-mgmt
|
||||
iface br-mgmt inet static
|
||||
bridge_stp off
|
||||
bridge_waitport 0
|
||||
bridge_fd 0
|
||||
# Notice the bridge port is the vlan tagged interface
|
||||
bridge_ports bond0.2176
|
||||
address 172.29.236.100
|
||||
netmask 255.255.252.0
|
||||
dns-nameservers 69.20.0.164 69.20.0.196
|
||||
|
||||
|
||||
# Bridge for vxlan network
|
||||
# Only the COMPUTE nodes will have an IP on this bridge!
|
||||
# When used by infra nodes, IPs exist in the containers and inet should be set to manual.
|
||||
auto br-vxlan
|
||||
iface br-vxlan inet static
|
||||
bridge_stp off
|
||||
bridge_waitport 0
|
||||
bridge_fd 0
|
||||
bridge_ports bond1.1998
|
||||
address 172.29.240.100
|
||||
netmask 255.255.252.0
|
||||
|
||||
|
||||
# Bridge for vlan network
|
||||
auto br-vlan
|
||||
iface br-vlan inet manual
|
||||
bridge_stp off
|
||||
bridge_waitport 0
|
||||
bridge_fd 0
|
||||
# Notice this bridge port is an Untagged host interface
|
||||
bridge_ports bond1
|
||||
|
||||
|
||||
# Bridge for storage network
|
||||
# Only the COMPUTE and STORAGE nodes will have an IP on this bridge!
|
||||
# When used by infra nodes, IPs exist in the containers and inet should be set to manual.
|
||||
auto br-storage
|
||||
iface br-storage inet static
|
||||
bridge_stp off
|
||||
bridge_waitport 0
|
||||
bridge_fd 0
|
||||
bridge_ports bond0.2144
|
||||
address 172.29.244.100
|
||||
netmask 255.255.252.0
|
||||
|
||||
132
etc/network/interfaces.d/openstack_interface.cfg.prod.example
Normal file
132
etc/network/interfaces.d/openstack_interface.cfg.prod.example
Normal file
@ -0,0 +1,132 @@
|
||||
# This is a multi-NIC bonded configuration to implement the required bridges
|
||||
# for OpenStack-Ansible. This illustrates the configuration of the first
|
||||
# Infrastructure host and the IP addresses assigned should be adapted
|
||||
# for implementation on the other hosts.
|
||||
#
|
||||
# After implementing this configuration, the host will need to be
|
||||
# rebooted.
|
||||
|
||||
# Assuming that eth0/1 and eth2/3 are dual port NIC's we pair
|
||||
# eth0 with eth2 and eth1 with eth3 for increased resiliency
|
||||
# in the case of one interface card failing.
|
||||
auto eth0
|
||||
iface eth0 inet manual
|
||||
bond-master bond0
|
||||
bond-primary eth0
|
||||
|
||||
auto eth1
|
||||
iface eth1 inet manual
|
||||
bond-master bond1
|
||||
bond-primary eth1
|
||||
|
||||
auto eth2
|
||||
iface eth2 inet manual
|
||||
bond-master bond0
|
||||
|
||||
auto eth3
|
||||
iface eth3 inet manual
|
||||
bond-master bond1
|
||||
|
||||
# Create a bonded interface. Note that the "bond-slaves" is set to none. This
|
||||
# is because the bond-master has already been set in the raw interfaces for
|
||||
# the new bond0.
|
||||
auto bond0
|
||||
iface bond0 inet static
|
||||
bond-slaves none
|
||||
bond-mode active-backup
|
||||
bond-miimon 100
|
||||
bond-downdelay 200
|
||||
bond-updelay 200
|
||||
|
||||
# This bond will carry VLAN and VXLAN traffic to ensure isolation from
|
||||
# control plane traffic on bond0.
|
||||
auto bond1
|
||||
iface bond1 inet manual
|
||||
bond-slaves none
|
||||
bond-mode active-backup
|
||||
bond-miimon 100
|
||||
bond-downdelay 250
|
||||
bond-updelay 250
|
||||
|
||||
# Container/Host management VLAN interface
|
||||
auto bond0.10
|
||||
iface bond0.10 inet manual
|
||||
vlan-raw-device bond0
|
||||
|
||||
# OpenStack Networking VXLAN (tunnel/overlay) VLAN interface
|
||||
auto bond1.30
|
||||
iface bond1.30 inet manual
|
||||
vlan-raw-device bond1
|
||||
|
||||
# Storage network VLAN interface (optional)
|
||||
auto bond0.20
|
||||
iface bond0.20 inet manual
|
||||
vlan-raw-device bond0
|
||||
|
||||
# Container/Host management bridge
|
||||
auto br-mgmt
|
||||
iface br-mgmt inet static
|
||||
bridge_stp off
|
||||
bridge_waitport 0
|
||||
bridge_fd 0
|
||||
bridge_ports bond0.10
|
||||
address 172.29.236.11
|
||||
netmask 255.255.252.0
|
||||
gateway 172.29.236.1
|
||||
dns-nameservers 8.8.8.8 8.8.4.4
|
||||
|
||||
# OpenStack Networking VXLAN (tunnel/overlay) bridge
|
||||
#
|
||||
# Only the COMPUTE and NETWORK nodes must have an IP address
|
||||
# on this bridge. When used by infrastructure nodes, the
|
||||
# IP addresses are assigned to containers which use this
|
||||
# bridge.
|
||||
#
|
||||
auto br-vxlan
|
||||
iface br-vxlan inet manual
|
||||
bridge_stp off
|
||||
bridge_waitport 0
|
||||
bridge_fd 0
|
||||
bridge_ports bond1.30
|
||||
|
||||
# compute1 VXLAN (tunnel/overlay) bridge config
|
||||
#auto br-vxlan
|
||||
#iface br-vxlan inet static
|
||||
# bridge_stp off
|
||||
# bridge_waitport 0
|
||||
# bridge_fd 0
|
||||
# bridge_ports bond1.30
|
||||
# address 172.29.240.16
|
||||
# netmask 255.255.252.0
|
||||
|
||||
# OpenStack Networking VLAN bridge
|
||||
auto br-vlan
|
||||
iface br-vlan inet manual
|
||||
bridge_stp off
|
||||
bridge_waitport 0
|
||||
bridge_fd 0
|
||||
bridge_ports bond1
|
||||
|
||||
# Storage bridge (optional)
|
||||
#
|
||||
# Only the COMPUTE and STORAGE nodes must have an IP address
|
||||
# on this bridge. When used by infrastructure nodes, the
|
||||
# IP addresses are assigned to containers which use this
|
||||
# bridge.
|
||||
#
|
||||
auto br-storage
|
||||
iface br-storage inet manual
|
||||
bridge_stp off
|
||||
bridge_waitport 0
|
||||
bridge_fd 0
|
||||
bridge_ports bond0.20
|
||||
|
||||
# compute1 Storage bridge
|
||||
#auto br-storage
|
||||
#iface br-storage inet static
|
||||
# bridge_stp off
|
||||
# bridge_waitport 0
|
||||
# bridge_fd 0
|
||||
# bridge_ports bond0.20
|
||||
# address 172.29.244.16
|
||||
# netmask 255.255.252.0
|
||||
@ -0,0 +1,94 @@
|
||||
# This is a single-NIC configuration to implement the required bridges
|
||||
# for OpenStack-Ansible. This illustrates the configuration of the first
|
||||
# Infrastructure host and the IP addresses assigned should be adapted
|
||||
# for implementation on the other hosts.
|
||||
#
|
||||
# After implementing this configuration, the host will need to be
|
||||
# rebooted.
|
||||
|
||||
# Physical interface
|
||||
auto eth0
|
||||
iface eth0 inet manual
|
||||
|
||||
# Container/Host management VLAN interface
|
||||
auto eth0.10
|
||||
iface eth0.10 inet manual
|
||||
vlan-raw-device eth0
|
||||
|
||||
# OpenStack Networking VXLAN (tunnel/overlay) VLAN interface
|
||||
auto eth0.30
|
||||
iface eth0.30 inet manual
|
||||
vlan-raw-device eth0
|
||||
|
||||
# Storage network VLAN interface (optional)
|
||||
auto eth0.20
|
||||
iface eth0.20 inet manual
|
||||
vlan-raw-device eth0
|
||||
|
||||
# Container/Host management bridge
|
||||
auto br-mgmt
|
||||
iface br-mgmt inet static
|
||||
bridge_stp off
|
||||
bridge_waitport 0
|
||||
bridge_fd 0
|
||||
bridge_ports eth0.10
|
||||
address 172.29.236.11
|
||||
netmask 255.255.252.0
|
||||
gateway 172.29.236.1
|
||||
dns-nameservers 8.8.8.8 8.8.4.4
|
||||
|
||||
# OpenStack Networking VXLAN (tunnel/overlay) bridge
|
||||
#
|
||||
# Only the COMPUTE and NETWORK nodes must have an IP address
|
||||
# on this bridge. When used by infrastructure nodes, the
|
||||
# IP addresses are assigned to containers which use this
|
||||
# bridge.
|
||||
#
|
||||
auto br-vxlan
|
||||
iface br-vxlan inet manual
|
||||
bridge_stp off
|
||||
bridge_waitport 0
|
||||
bridge_fd 0
|
||||
bridge_ports eth0.30
|
||||
|
||||
# compute1 VXLAN (tunnel/overlay) bridge config
|
||||
#auto br-vxlan
|
||||
#iface br-vxlan inet static
|
||||
# bridge_stp off
|
||||
# bridge_waitport 0
|
||||
# bridge_fd 0
|
||||
# bridge_ports eth0.30
|
||||
# address 172.29.240.12
|
||||
# netmask 255.255.252.0
|
||||
|
||||
# OpenStack Networking VLAN bridge
|
||||
auto br-vlan
|
||||
iface br-vlan inet manual
|
||||
bridge_stp off
|
||||
bridge_waitport 0
|
||||
bridge_fd 0
|
||||
bridge_ports none
|
||||
|
||||
# Storage bridge (optional)
|
||||
#
|
||||
# Only the COMPUTE and STORAGE nodes must have an IP address
|
||||
# on this bridge. When used by infrastructure nodes, the
|
||||
# IP addresses are assigned to containers which use this
|
||||
# bridge.
|
||||
#
|
||||
auto br-storage
|
||||
iface br-storage inet manual
|
||||
bridge_stp off
|
||||
bridge_waitport 0
|
||||
bridge_fd 0
|
||||
bridge_ports eth0.20
|
||||
|
||||
# compute1 Storage bridge
|
||||
#auto br-storage
|
||||
#iface br-storage inet static
|
||||
# bridge_stp off
|
||||
# bridge_waitport 0
|
||||
# bridge_fd 0
|
||||
# bridge_ports eth0.20
|
||||
# address 172.29.244.12
|
||||
# netmask 255.255.252.0
|
||||
Loading…
Reference in New Issue
Block a user