openstack-ansible/playbooks/roles/os_cinder/templates/lvm.conf.j2
git-harry 6ba292a295 Enable udev for lvm in cinder-volume container
The current configuration of LVM for cinder-volume has udev_sync=0.
This means that udev is not creating the devices that appear in /dev.
The device files created reference specific device numbers, and these
persist between reboots. When the host is rebooted there is no
guarantee that device numbers allocated to the logical volumes will
match those defined in the device files. This can be observed by
comparing the output of 'dmsetup info' and 'ls -l /dev/mapper'.

LVM's use of udev was disabled in an attempt to protect the host from
the potential that uevents generated would be processed by all
containers on the host. In practise this should not be an issue because
there are not other containers running on a cinder host.

This commit adjusts the lvm.conf file created so that udev is used. It
also adds a mount entry to create a devtmpfs on /dev. Finally
'udevadm trigger' is run to add the devices under /dev/mapper.
Closes-Bug: #1436999
Change-Id: I9ab35cf4438a369563f8c08870c1acfd0cc394b0
2015-06-10 01:57:53 +00:00

120 lines
3.0 KiB
Django/Jinja

# {{ ansible_managed }}
{% set used_lvm_devices = [] %}
{% set lv_devices = lvm_devices.stdout.split('\n') %}
{% if lv_devices|length > 0 %}
{% for net in lv_devices %}
{% if net != '' %}
{% set lv_device = '"a/' + net + '/"' %}
{% if used_lvm_devices.append(lv_device) %}{% endif %}
{% endif %}
{% endfor %}
{% endif %}
# Ansible Discovered LVM Devices {{ lv_devices }}
{% if used_lvm_devices|length <= 0 %}
{% if used_lvm_devices.append('"a/.*/"') %}{% endif %}
{% else %}
{% if used_lvm_devices.append('"r/.*/"') %}{% endif %}
{% endif %}
devices {
dir = "/dev"
scan = [ "/dev" ]
obtain_device_list_from_udev = 1
preferred_names = [ ]
filter = [ {{ used_lvm_devices|join(', ') }} ]
cache_dir = "/run/lvm"
cache_file_prefix = ""
write_cache_state = 1
sysfs_scan = 1
multipath_component_detection = 1
md_component_detection = 1
md_chunk_alignment = 1
data_alignment_detection = 1
data_alignment = 0
data_alignment_offset_detection = 1
ignore_suspended_devices = 0
disable_after_error_count = 0
require_restorefile_with_uuid = 1
pv_min_size = 2048
issue_discards = 1
}
allocation {
maximise_cling = 1
mirror_logs_require_separate_pvs = 0
thin_pool_metadata_require_separate_pvs = 0
}
log {
verbose = 0
silent = 0
syslog = 1
overwrite = 0
level = 0
indent = 1
command_names = 0
prefix = " "
}
backup {
backup = 1
backup_dir = "/etc/lvm/backup"
archive = 1
archive_dir = "/etc/lvm/archive"
retain_min = 10
retain_days = 30
}
shell {
history_size = 100
}
global {
umask = 077
test = 0
units = "h"
si_unit_consistency = 1
activation = 1
proc = "/proc"
locking_type = 1
wait_for_locks = 1
fallback_to_clustered_locking = 1
fallback_to_local_locking = 1
locking_dir = "/run/lock/lvm"
prioritise_write_locks = 1
abort_on_internal_errors = 0
detect_internal_vg_cache_corruption = 0
metadata_read_only = 0
mirror_segtype_default = "mirror"
use_lvmetad = 0
thin_check_executable = "/usr/sbin/thin_check"
thin_check_options = [ "-q" ]
}
activation {
checks = 0
udev_sync = 1
udev_rules = 1
verify_udev_operations = 0
retry_deactivation = 1
missing_stripe_filler = "error"
use_linear_target = 1
reserved_stack = 64
reserved_memory = 8192
process_priority = -18
mirror_region_size = 512
readahead = "auto"
raid_fault_policy = "warn"
mirror_log_fault_policy = "allocate"
mirror_image_fault_policy = "remove"
snapshot_autoextend_threshold = 100
snapshot_autoextend_percent = 20
thin_pool_autoextend_threshold = 100
thin_pool_autoextend_percent = 20
use_mlockall = 0
monitoring = 0
polling_interval = 15
}
dmeventd {
mirror_library = "libdevmapper-event-lvm2mirror.so"
snapshot_library = "libdevmapper-event-lvm2snapshot.so"
thin_library = "libdevmapper-event-lvm2thin.so"
}