openstack-ansible/etc/openstack_deploy/user_variables.yml
Miguel Alex Cantu 5db330d9dc Configuring AODH DB now that it uses MySQL.
AODH now uses MySQL and needs Ansible tasks
to setup the respective DB and user.

Related: I94a585f9c1da51c4f278f4a12e29d395a261e716x
Change-Id: Ie5705ead548f2ceed50348131cdc5ab8f72e12f4
2016-06-14 15:15:35 +00:00

187 lines
7.9 KiB
YAML

---
# Copyright 2014, Rackspace US, Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
###
### This file contains commonly used overrides for convenience. Please inspect
### the defaults for each role to find additional override options.
###
## Debug and Verbose options.
debug: false
## Common Ceilometer Overrides
# ceilometer_db_type: mongodb
# ceilometer_db_ip: localhost
# ceilometer_db_port: 27017
## Common Override to enable Ceilometer for each service.
## By default all service are *not* enabled.
# swift_ceilometer_enabled: True
# heat_ceilometer_enabled: True
# cinder_ceilometer_enabled: True
# glance_ceilometer_enabled: True
# nova_ceilometer_enabled: True
# neutron_ceilometer_enabled: True
# keystone_ceilometer_enabled: True
## Common Glance Overrides
# Set glance_default_store to "swift" if using Cloud Files or swift backend
# or "rbd" if using ceph backend; the latter will trigger ceph to get
# installed on glance. If using a file store, a shared file store is
# recommended. See the OpenStack-Ansible install guide and the OpenStack
# documentation for more details.
# glance_default_store: file
## Ceph pool name for Glance to use
# glance_rbd_store_pool: images
# glance_rbd_store_chunk_size: 8
## Common Nova Overrides
# When nova_libvirt_images_rbd_pool is defined, ceph will be installed on nova
# hosts.
# nova_libvirt_images_rbd_pool: vms
# If you wish to change the dhcp_domain configured for both nova and neutron
# dhcp_domain: openstacklocal
## Common Glance Overrides when using a Swift back-end
# By default when 'glance_default_store' is set to 'swift' the playbooks will
# expect to use the Swift back-end that is configured in the same inventory.
# If the Swift back-end is not in the same inventory (ie it is already setup
# through some other means) then these settings should be used.
#
# NOTE: Ensure that the auth version matches your authentication endpoint.
#
# NOTE: If the password for glance_swift_store_key contains a dollar sign ($),
# it must be escaped with an additional dollar sign ($$), not a backslash. For
# example, a password of "super$ecure" would need to be entered as
# "super$$ecure" below. See Launchpad Bug #1259729 for more details.
#
# glance_swift_store_auth_version: 3
# glance_swift_store_auth_address: "https://some.auth.url.com"
# glance_swift_store_user: "OPENSTACK_TENANT_ID:OPENSTACK_USER_NAME"
# glance_swift_store_key: "OPENSTACK_USER_PASSWORD"
# glance_swift_store_container: "NAME_OF_SWIFT_CONTAINER"
# glance_swift_store_region: "NAME_OF_REGION"
## Common Ceph Overrides
# ceph_mons:
# - 10.16.5.40
# - 10.16.5.41
# - 10.16.5.42
## Custom Ceph Configuration File (ceph.conf)
# By default, your deployment host will connect to one of the mons defined above to
# obtain a copy of your cluster's ceph.conf. If you prefer, uncomment ceph_conf_file
# and customise to avoid ceph.conf being copied from a mon.
#ceph_conf_file: |
# [global]
# fsid = 00000000-1111-2222-3333-444444444444
# mon_initial_members = mon1.example.local,mon2.example.local,mon3.example.local
# mon_host = 10.16.5.40,10.16.5.41,10.16.5.42
# # optionally, you can use this construct to avoid defining this list twice:
# # mon_host = {{ ceph_mons|join(',') }}
# auth_cluster_required = cephx
# auth_service_required = cephx
# By default, openstack-ansible configures all OpenStack services to talk to
# RabbitMQ over encrypted connections on port 5671. To opt-out of this default,
# set the rabbitmq_use_ssl variable to 'false'. The default setting of 'true'
# is highly recommended for securing the contents of RabbitMQ messages.
# rabbitmq_use_ssl: false
# RabbitMQ management plugin is enabled by default, the guest user has been
# removed for security reasons and a new userid 'monitoring' has been created
# with the 'monitoring' user tag. In order to modify the userid, uncomment the
# following and change 'monitoring' to your userid of choice.
# rabbitmq_monitoring_userid: monitoring
## Additional pinning generator that will allow for more packages to be pinned as you see fit.
## All pins allow for package and versions to be defined. Be careful using this as versions
## are always subject to change and updates regarding security will become your problem from this
## point on. Pinning can be done based on a package version, release, or origin. Use "*" in the
## package name to indicate that you want to pin all package to a particular constraint.
# apt_pinned_packages:
# - { package: "lxc", version: "1.0.7-0ubuntu0.1" }
# - { package: "libvirt-bin", version: "1.2.2-0ubuntu13.1.9" }
# - { package: "rabbitmq-server", origin: "www.rabbitmq.com" }
# - { package: "*", release: "MariaDB" }
## Environment variable settings
# This allows users to specify the additional environment variables to be set
# which is useful in setting where you working behind a proxy. If working behind
# a proxy It's important to always specify the scheme as "http://". This is what
# the underlying python libraries will handle best. This proxy information will be
# placed both on the hosts and inside the containers.
## Example environment variable setup:
# proxy_env_url: http://username:pa$$w0rd@10.10.10.9:9000/
# no_proxy_env: "localhost,127.0.0.1,{{ internal_lb_vip_address }},{{ external_lb_vip_address }},{% for host in groups['all_containers'] %}{{ hostvars[host]['container_address'] }}{% if not loop.last %},{% endif %}{% endfor %}"
# global_environment_variables:
# HTTP_PROXY: "{{ proxy_env_url }}"
# HTTPS_PROXY: "{{ proxy_env_url }}"
# NO_PROXY: "{{ no_proxy_env }}"
# http_proxy: "{{ proxy_env_url }}"
# https_proxy: "{{ proxy_env_url }}"
# no_proxy: "{{ no_proxy_env }}"
## SSH connection wait time
# If an increased delay for the ssh connection check is desired,
# uncomment this variable and set it appropriately.
#ssh_delay: 5
## HAProxy
# Uncomment this to disable keepalived installation (cf. documentation)
# haproxy_use_keepalived: False
#
# HAProxy Keepalived configuration (cf. documentation)
# Make sure that this is set correctly according to the CIDR used for your
# internal and external addresses.
# haproxy_keepalived_external_vip_cidr: "{{external_lb_vip_address}}/32"
# haproxy_keepalived_internal_vip_cidr: "{{internal_lb_vip_address}}/32"
# haproxy_keepalived_external_interface:
# haproxy_keepalived_internal_interface:
# Defines the default VRRP id used for keepalived with haproxy.
# Overwrite it to your value to make sure you don't overlap
# with existing VRRPs id on your network. Default is 10 for the external and 11 for the
# internal VRRPs
# haproxy_keepalived_external_virtual_router_id:
# haproxy_keepalived_internal_virtual_router_id:
# Defines the VRRP master/backup priority. Defaults respectively to 100 and 20
# haproxy_keepalived_priority_master:
# haproxy_keepalived_priority_backup:
# Keepalived default IP address used to check its alive status (IPv4 only)
# keepalived_ping_address: "193.0.14.129"
# All the previous variables are used in a var file, fed to the keepalived role.
# To use another file to feed the role, override the following var:
# haproxy_keepalived_vars_file: 'vars/configs/keepalived_haproxy.yml'
## Host security hardening
# The openstack-ansible-security role provides security hardening for hosts
# by applying security configurations from the STIG. Hardening is disabled by
# default, but an option to opt-in is available by setting the following
# variable to 'true'.
# Docs: http://docs.openstack.org/developer/openstack-ansible-security/
# apply_security_hardening: true