openstack-ansible/doc/source/conf.py
Jesse Pretorius 10a7d80b79 [docs] Resolve errors and simplify sphinx config
This patch does the following:

- Simplifies the sphinx configuration introduced in
  https://review.openstack.org/371722 to reduce the
  number of variables involved. The variables are
  also ordered in the same way everywhere to make it
  easier to read and troubleshoot.

- Simplifies some of the CLI guides to be more explicit
  about the tag to checkout when cloning the git repo.

- Cleaned up some references which went to non-existant
  documents.

- Added a link to the networking appendix.

- As per https://review.openstack.org/369650 the
  backup directory for the upgrade process is now
  the name of the source version the upgrade process is
  working with.

Change-Id: Iee30a32f99a66d9facb049311cadf1b9a8b2170e
2016-09-19 15:28:58 +00:00

331 lines
11 KiB
Python

#!/usr/bin/env python3
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
# implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# This file is execfile()d with the current directory set to its
# containing dir.
#
# Note that not all possible configuration values are present in this
# autogenerated file.
#
# All configuration values have a default; values that are commented out
# serve to show the default.
import openstackdocstheme
import os
import pbr.version
from subprocess import Popen, PIPE
import sys
# If extensions (or modules to document with autodoc) are in another directory,
# add these directories to sys.path here. If the directory is relative to the
# documentation root, use os.path.abspath to make it absolute, like shown here.
sys.path.insert(0, os.path.abspath('../../playbooks/inventory/'))
# -- General configuration ------------------------------------------------
# If your documentation needs a minimal Sphinx version, state it here.
# needs_sphinx = '1.0'
# Add any Sphinx extension module names here, as strings. They can be
# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
# ones.
# TODO(ajaeger): enable PDF building, for example add 'rst2pdf.pdfbuilder'
extensions = ['sphinx.ext.autodoc']
# Add any paths that contain templates here, relative to this directory.
#templates_path = ['_templates']
# The suffix of source filenames.
source_suffix = '.rst'
# The encoding of source files.
# source_encoding = 'utf-8-sig'
# The master toctree document.
master_doc = 'index'
# General information about the project.
author = 'OpenStack-Ansible Contributors'
category = 'Miscellaneous'
copyright = '2014-2016, OpenStack-Ansible Contributors'
description = 'OpenStack-Ansible deploys OpenStack environments using Ansible.'
project = 'OpenStack-Ansible'
target_name = 'openstack-ansible'
title = 'OpenStack-Ansible Documentation'
# The version info for the project you're documenting, acts as replacement for
# |version| and |release|, also used in various other places throughout the
# built documents.
#
# The short X.Y version.
version_info = pbr.version.VersionInfo(target_name)
# The full version, including alpha/beta/rc tags.
release = version_info.version_string_with_vcs()
# The short X.Y version.
version = version_info.canonical_version_string()
# A few variables have to be set for the log-a-bug feature.
# giturl: The location of conf.py on Git. Must be set manually.
# gitsha: The SHA checksum of the bug description. Automatically extracted from git log.
# bug_tag: Tag for categorizing the bug. Must be set manually.
# These variables are passed to the logabug code via html_context.
giturl = ("http://git.openstack.org/cgit/openstack/{0}"
"/tree/doc/source").format(target_name)
git_cmd = "/usr/bin/git log | head -n1 | cut -f2 -d' '"
gitsha = os.popen(git_cmd).read().strip('\n')
bug_title = "Documentation bug"
html_context = {"gitsha": gitsha, "giturl": giturl,
"bug_tag": "docs", "bug_title": bug_title,
"bug_project": target_name}
# The language for content autogenerated by Sphinx. Refer to documentation
# for a list of supported languages.
# language = None
# There are two options for replacing |today|: either, you set today to some
# non-false value, then it is used:
# today = ''
# Else, today_fmt is used as the format for a strftime call.
# today_fmt = '%B %d, %Y'
# List of patterns, relative to source directory, that match files and
# directories to ignore when looking for source files.
exclude_patterns = []
# The reST default role (used for this markup: `text`) to use for all
# documents.
# default_role = None
# If true, '()' will be appended to :func: etc. cross-reference text.
# add_function_parentheses = True
# If true, the current module name will be prepended to all description
# unit titles (such as .. function::).
# add_module_names = True
# If true, sectionauthor and moduleauthor directives will be shown in the
# output. They are ignored by default.
# show_authors = False
# The name of the Pygments (syntax highlighting) style to use.
pygments_style = 'sphinx'
# A list of ignored prefixes for module index sorting.
# modindex_common_prefix = []
# If true, keep warnings as "system message" paragraphs in the built documents.
# keep_warnings = False
# -- Options for HTML output ----------------------------------------------
# The theme to use for HTML and HTML Help pages. See the documentation for
# a list of builtin themes.
html_theme = 'openstackdocs'
# Theme options are theme-specific and customize the look and feel of a theme
# further. For a list of options available for each theme, see the
# documentation.
# html_theme_options = {}
# Add any paths that contain custom themes here, relative to this directory.
html_theme_path = [openstackdocstheme.get_html_theme_path()]
# The name for this set of Sphinx documents. If None, it defaults to
# "<project> v<release> documentation".
# html_title = None
# A shorter title for the navigation bar. Default is the same as html_title.
# html_short_title = None
# The name of an image file (relative to this directory) to place at the top
# of the sidebar.
# html_logo = None
# The name of an image file (within the static path) to use as favicon of the
# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32
# pixels large.
# html_favicon = None
# Add any paths that contain custom static files (such as style sheets) here,
# relative to this directory. They are copied after the builtin static files,
# so a file named "default.css" will overwrite the builtin "default.css".
# html_static_path = []
# Add any extra paths that contain custom files (such as robots.txt or
# .htaccess) here, relative to this directory. These files are copied
# directly to the root of the documentation.
# html_extra_path = []
# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
# using the given strftime format.
html_last_updated_fmt = '%Y-%m-%d %H:%M'
# If true, SmartyPants will be used to convert quotes and dashes to
# typographically correct entities.
# html_use_smartypants = True
# Custom sidebar templates, maps document names to template names.
# html_sidebars = {}
# Additional templates that should be rendered to pages, maps page names to
# template names.
# html_additional_pages = {}
# If false, no module index is generated.
# html_domain_indices = True
# If false, no index is generated.
html_use_index = False
# If true, the index is split into individual pages for each letter.
# html_split_index = False
# If true, links to the reST sources are added to the pages.
html_show_sourcelink = False
# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
# html_show_sphinx = True
# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
# html_show_copyright = True
# If true, an OpenSearch description file will be output, and all pages will
# contain a <link> tag referring to it. The value of this option must be the
# base URL from which the finished HTML is served.
# html_use_opensearch = ''
# This is the file name suffix for HTML files (e.g. ".xhtml").
# html_file_suffix = None
# Output file base name for HTML help builder.
htmlhelp_basename = target_name + '-docs'
# If true, publish source files
html_copy_source = False
# -- Options for LaTeX output ---------------------------------------------
latex_elements = {
# The paper size ('letterpaper' or 'a4paper').
# 'papersize': 'letterpaper',
# The font size ('10pt', '11pt' or '12pt').
# 'pointsize': '10pt',
# Additional stuff for the LaTeX preamble.
# 'preamble': '',
}
# Grouping the document tree into LaTeX files. List of tuples
# (source start file, target name, title,
# author, documentclass [howto, manual, or own class]).
latex_documents = [
(master_doc, target_name + '.tex',
title, author, 'manual'),
]
# The name of an image file (relative to this directory) to place at the top of
# the title page.
# latex_logo = None
# For "manual" documents, if this is true, then toplevel headings are parts,
# not chapters.
# latex_use_parts = False
# If true, show page references after internal links.
# latex_show_pagerefs = False
# If true, show URL addresses after external links.
# latex_show_urls = False
# Documents to append as an appendix to all manuals.
# latex_appendices = []
# If false, no module index is generated.
# latex_domain_indices = True
# -- Options for manual page output ---------------------------------------
# One entry per manual page. List of tuples
# (source start file, name, description, authors, manual section).
man_pages = [
(master_doc, target_name,
title, [author], 1)
]
# If true, show URL addresses after external links.
# man_show_urls = False
# -- Options for Texinfo output -------------------------------------------
# Grouping the document tree into Texinfo files. List of tuples
# (source start file, target name, title, author,
# dir menu entry, description, category)
texinfo_documents = [
(master_doc, target_name,
title, author, project,
description, category),
]
# Documents to append as an appendix to all manuals.
# texinfo_appendices = []
# If false, no module index is generated.
# texinfo_domain_indices = True
# How to display URL addresses: 'footnote', 'no', or 'inline'.
# texinfo_show_urls = 'footnote'
# If true, do not generate a @detailmenu in the "Top" node's menu.
# texinfo_no_detailmenu = False
# -- Options for PDF output --------------------------------------------------
pdf_documents = [
(master_doc, target_name,
title, author)
]
latest_tag = os.popen('git describe --abbrev=0 --tags').read().strip('\n')
previous_release_branch_name='mitaka'
current_release_branch_name='newton'
previous_release_capital_name=previous_release_branch_name.upper()
previous_release_formal_name=previous_release_branch_name.capitalize()
current_release_capital_name=current_release_branch_name.upper()
current_release_formal_name=current_release_branch_name.capitalize()
upgrade_backup_dir="``/etc/openstack_deploy."+previous_release_capital_name+"``"
rst_epilog = """
.. |previous_release_branch_name| replace:: %s
.. |current_release_branch_name| replace:: %s
.. |previous_release_capital_name| replace:: %s
.. |previous_release_formal_name| replace:: %s
.. |current_release_capital_name| replace:: %s
.. |current_release_formal_name| replace:: %s
.. |upgrade_backup_dir| replace:: %s
.. |latest_tag| replace:: %s
""" % (previous_release_branch_name,
current_release_branch_name,
previous_release_capital_name,
previous_release_formal_name,
current_release_capital_name,
current_release_formal_name,
upgrade_backup_dir,
latest_tag)