openstack/openstack-manuals
Code Issues Proposed changes
4ad12a815d
openstack-manuals/doc/install-guide/source/environment-networking-compute.rst
Andreas Jaeger f80792b1ce Remove obsolete rstbash and '.. path' 
The rst2bash tool used the ".. path" syntax to update files. Since we're
not using rst2bash anymore, remove all of this.

Remove also the rst2bash documentation.

Change-Id: I7195cd3b566e9bac67452ec5174687e734fb53bc
2018-10-16 21:22:52 +02:00

1.6 KiB
Raw Blame History

Compute node

Configure network interfaces

  1. Configure the first interface as the management interface:

    IP address: 10.0.0.31

    Network mask: 255.255.255.0 (or /24)

    Default gateway: 10.0.0.1

    Note

    Additional compute nodes should use 10.0.0.32, 10.0.0.33, and so on.

  2. The provider interface uses a special configuration without an IP address assigned to it. Configure the second interface as the provider interface:

    Replace INTERFACE_NAME with the actual interface name. For example, eth1 or ens224.

    For Ubuntu:

    • Edit the /etc/network/interfaces file to contain the following:

      # The provider network interface
auto INTERFACE_NAME
iface  INTERFACE_NAME inet manual
up ip link set dev $IFACE up
down ip link set dev $IFACE down

    For RHEL or CentOS:

    • Edit the /etc/sysconfig/network-scripts/ifcfg-INTERFACE_NAME file to contain the following:

      Do not change the HWADDR and UUID keys.

      DEVICE=INTERFACE_NAME
TYPE=Ethernet
ONBOOT="yes"
BOOTPROTO="none"

    For SUSE:

    • Edit the /etc/sysconfig/network/ifcfg-INTERFACE_NAME file to contain the following:

      STARTMODE='auto'
BOOTPROTO='static'

  3. Reboot the system to activate the changes.

Configure name resolution

  1. Set the hostname of the node to compute1.