openstack-manuals/doc/install-guide/source/glance-install.rst
KATO Tomoyuki 95847f47e2 [install] remove Debian specific procedure from tool
This is a following patch of I8df6b3b382137d08d60f85bc41bcd98ac1f4eb47
"Factor out Install Guide for Debian with debconf".
Mainly, remove Debian specific procedure from build tool.
Also, remove debconf content from Debian Install Guide,
but there are still some debconf content, which is needed to
cleanup at further following patches.

Change-Id: Iffced3907ac2fddd42e6adc56b6e4859fde8e987
2016-05-24 23:53:00 +09:00

336 lines
10 KiB
ReStructuredText

Install and configure
~~~~~~~~~~~~~~~~~~~~~
This section describes how to install and configure the Image service,
code-named glance, on the controller node. For simplicity, this
configuration stores images on the local file system.
.. only:: obs or rdo or ubuntu
Prerequisites
-------------
Before you install and configure the Image service, you must
create a database, service credentials, and API endpoints.
#. To create the database, complete these steps:
* Use the database access client to connect to the database
server as the ``root`` user:
.. code-block:: console
$ mysql -u root -p
* Create the ``glance`` database:
.. code-block:: console
CREATE DATABASE glance;
* Grant proper access to the ``glance`` database:
.. code-block:: console
GRANT ALL PRIVILEGES ON glance.* TO 'glance'@'localhost' \
IDENTIFIED BY 'GLANCE_DBPASS';
GRANT ALL PRIVILEGES ON glance.* TO 'glance'@'%' \
IDENTIFIED BY 'GLANCE_DBPASS';
Replace ``GLANCE_DBPASS`` with a suitable password.
* Exit the database access client.
#. Source the ``admin`` credentials to gain access to
admin-only CLI commands:
.. code-block:: console
$ . admin-openrc
#. To create the service credentials, complete these steps:
* Create the ``glance`` user:
.. code-block:: console
$ openstack user create --domain default --password-prompt glance
User Password:
Repeat User Password:
+-----------+----------------------------------+
| Field | Value |
+-----------+----------------------------------+
| domain_id | e0353a670a9e496da891347c589539e9 |
| enabled | True |
| id | e38230eeff474607805b596c91fa15d9 |
| name | glance |
+-----------+----------------------------------+
* Add the ``admin`` role to the ``glance`` user and
``service`` project:
.. code-block:: console
$ openstack role add --project service --user glance admin
.. note::
This command provides no output.
* Create the ``glance`` service entity:
.. code-block:: console
$ openstack service create --name glance \
--description "OpenStack Image" image
+-------------+----------------------------------+
| Field | Value |
+-------------+----------------------------------+
| description | OpenStack Image |
| enabled | True |
| id | 8c2c7f1b9b5049ea9e63757b5533e6d2 |
| name | glance |
| type | image |
+-------------+----------------------------------+
#. Create the Image service API endpoints:
.. code-block:: console
$ openstack endpoint create --region RegionOne \
image public http://controller:9292
+--------------+----------------------------------+
| Field | Value |
+--------------+----------------------------------+
| enabled | True |
| id | 340be3625e9b4239a6415d034e98aace |
| interface | public |
| region | RegionOne |
| region_id | RegionOne |
| service_id | 8c2c7f1b9b5049ea9e63757b5533e6d2 |
| service_name | glance |
| service_type | image |
| url | http://controller:9292 |
+--------------+----------------------------------+
$ openstack endpoint create --region RegionOne \
image internal http://controller:9292
+--------------+----------------------------------+
| Field | Value |
+--------------+----------------------------------+
| enabled | True |
| id | a6e4b153c2ae4c919eccfdbb7dceb5d2 |
| interface | internal |
| region | RegionOne |
| region_id | RegionOne |
| service_id | 8c2c7f1b9b5049ea9e63757b5533e6d2 |
| service_name | glance |
| service_type | image |
| url | http://controller:9292 |
+--------------+----------------------------------+
$ openstack endpoint create --region RegionOne \
image admin http://controller:9292
+--------------+----------------------------------+
| Field | Value |
+--------------+----------------------------------+
| enabled | True |
| id | 0c37ed58103f4300a84ff125a539032d |
| interface | admin |
| region | RegionOne |
| region_id | RegionOne |
| service_id | 8c2c7f1b9b5049ea9e63757b5533e6d2 |
| service_name | glance |
| service_type | image |
| url | http://controller:9292 |
+--------------+----------------------------------+
Install and configure components
--------------------------------
.. only:: obs or rdo or ubuntu
.. include:: shared/note_configuration_vary_by_distribution.rst
.. only:: obs
#. Install the packages:
.. code-block:: console
# zypper install openstack-glance
.. only:: rdo
#. Install the packages:
.. code-block:: console
# yum install openstack-glance
.. only:: ubuntu
#. Install the packages:
.. code-block:: console
# apt-get install glance
.. only:: obs or rdo or ubuntu
2. Edit the ``/etc/glance/glance-api.conf`` file and complete the
following actions:
* In the ``[database]`` section, configure database access:
.. code-block:: ini
[database]
...
connection = mysql+pymysql://glance:GLANCE_DBPASS@controller/glance
Replace ``GLANCE_DBPASS`` with the password you chose for the
Image service database.
* In the ``[keystone_authtoken]`` and ``[paste_deploy]`` sections,
configure Identity service access:
.. code-block:: ini
[keystone_authtoken]
...
auth_uri = http://controller:5000
auth_url = http://controller:35357
memcached_servers = controller:11211
auth_type = password
project_domain_name = default
user_domain_name = default
project_name = service
username = glance
password = GLANCE_PASS
[paste_deploy]
...
flavor = keystone
Replace ``GLANCE_PASS`` with the password you chose for the
``glance`` user in the Identity service.
.. note::
Comment out or remove any other options in the
``[keystone_authtoken]`` section.
* In the ``[glance_store]`` section, configure the local file
system store and location of image files:
.. code-block:: ini
[glance_store]
...
stores = file,http
default_store = file
filesystem_store_datadir = /var/lib/glance/images/
3. Edit the ``/etc/glance/glance-registry.conf`` file and complete
the following actions:
* In the ``[database]`` section, configure database access:
.. code-block:: ini
[database]
...
connection = mysql+pymysql://glance:GLANCE_DBPASS@controller/glance
Replace ``GLANCE_DBPASS`` with the password you chose for the
Image service database.
* In the ``[keystone_authtoken]`` and ``[paste_deploy]`` sections,
configure Identity service access:
.. code-block:: ini
[keystone_authtoken]
...
auth_uri = http://controller:5000
auth_url = http://controller:35357
memcached_servers = controller:11211
auth_type = password
project_domain_name = default
user_domain_name = default
project_name = service
username = glance
password = GLANCE_PASS
[paste_deploy]
...
flavor = keystone
Replace ``GLANCE_PASS`` with the password you chose for the
``glance`` user in the Identity service.
.. note::
Comment out or remove any other options in the
``[keystone_authtoken]`` section.
.. only:: rdo or ubuntu
4. Populate the Image service database:
.. code-block:: console
# su -s /bin/sh -c "glance-manage db_sync" glance
.. note::
Ignore any deprecation messages in this output.
.. only:: debian
#. Install the packages:
.. code-block:: console
# apt-get install glance python-glanceclient
#. Respond to prompts for debconf.
.. :doc:`database management <debconf/debconf-dbconfig-common>`,
:doc:`Identity service credentials <debconf/debconf-keystone-authtoken>`,
:doc:`service endpoint registration <debconf/debconf-api-endpoints>`,
and :doc:`message broker credentials <debconf/debconf-rabbitmq>`.
#. Select the ``keystone`` pipeline to configure the Image service
to use the Identity service:
.. image:: figures/debconf-screenshots/glance-common_pipeline_flavor.png
:width: 100%
.. only:: obs or rdo or ubuntu
Finalize installation
---------------------
.. only:: obs or rdo
* Start the Image services and configure them to start when
the system boots:
.. code-block:: console
# systemctl enable openstack-glance-api.service \
openstack-glance-registry.service
# systemctl start openstack-glance-api.service \
openstack-glance-registry.service
.. only:: ubuntu
#. Restart the Image services:
.. code-block:: console
# service glance-registry restart
# service glance-api restart