Olena Logvinova 788b49f554 [ops-guide] Changed underscore to hyphen in RST files

This patch:

- renames all the RST files in the ops-guide folder to use a
  hyphen instead of underscore;
- adds redirects to the renamed files to .htacces;
- removes /([a-z-]+) from Admin Guide redirects in .htacces.

Change-Id: I4c35a4c89ae9900a2e9bfe1a7a3bcb94ab72454b
Implements: blueprint consistency-file-rename

2016-08-10 18:51:33 +03:00

2.8 KiB

Raw Blame History

rsyslog

A number of operating systems use rsyslog as the default logging service. Since it is natively able to send logs to a remote location, you do not have to install anything extra to enable this feature, just modify the configuration file. In doing this, consider running your logging over a management network or using an encrypted VPN to avoid interception.

rsyslog client configuration

To begin, configure all OpenStack components to log to the syslog log file in addition to their standard log file location. Also, configure each component to log to a different syslog facility. This makes it easier to split the logs into individual components on the central server:

nova.conf:

use_syslog=True
syslog_log_facility=LOG_LOCAL0

glance-api.conf and glance-registry.conf:

use_syslog=True
syslog_log_facility=LOG_LOCAL1

cinder.conf:

use_syslog=True
syslog_log_facility=LOG_LOCAL2

keystone.conf:

use_syslog=True
syslog_log_facility=LOG_LOCAL3

By default, Object Storage logs to syslog.

Next, create /etc/rsyslog.d/client.conf with the following line:

*.* @192.168.1.10

This instructs rsyslog to send all logs to the IP listed. In this example, the IP points to the cloud controller.

rsyslog server configuration

Designate a server as the central logging server. The best practice is to choose a server that is solely dedicated to this purpose. Create a file called /etc/rsyslog.d/server.conf with the following contents:

# Enable UDP
$ModLoad imudp
# Listen on 192.168.1.10 only
$UDPServerAddress 192.168.1.10
# Port 514
$UDPServerRun 514

# Create logging templates for nova
$template NovaFile,"/var/log/rsyslog/%HOSTNAME%/nova.log"
$template NovaAll,"/var/log/rsyslog/nova.log"

# Log everything else to syslog.log
$template DynFile,"/var/log/rsyslog/%HOSTNAME%/syslog.log"
*.* ?DynFile

# Log various openstack components to their own individual file
local0.* ?NovaFile
local0.* ?NovaAll
& ~

This example configuration handles the nova service only. It first configures rsyslog to act as a server that runs on port 514. Next, it creates a series of logging templates. Logging templates control where received logs are stored. Using the last example, a nova log from c01.example.com goes to the following locations:

/var/log/rsyslog/c01.example.com/nova.log
/var/log/rsyslog/nova.log

This is useful, as logs from c02.example.com go to:

/var/log/rsyslog/c02.example.com/nova.log
/var/log/rsyslog/nova.log

This configuration will result in a separate log file for each compute node as well as an aggregated log file that contains nova logs from all nodes.

2.8 KiB Raw Blame History

rsyslog

rsyslog client configuration

rsyslog server configuration

2.8 KiB

Raw Blame History