openstack-manuals/doc/install-guide/source/environment-networking-compute.rst
Matthew Kassawara 9be3e9df4a Install: Environment updates for Mitaka
Update environment configuration for Mitaka to account for
changes to network nomenclature.

Implements: bp installguide-mitaka
Change-Id: I9a20e18f66425e5968fefebb8901eac82fb212af
2016-03-07 11:53:37 -07:00

1.6 KiB

Compute node

Configure network interfaces

  1. Configure the first interface as the management interface:

    IP address: 10.0.0.31

    Network mask: 255.255.255.0 (or /24)

    Default gateway: 10.0.0.1

    Note

    Additional compute nodes should use 10.0.0.32, 10.0.0.33, and so on.

  2. The provider interface uses a special configuration without an IP address assigned to it. Configure the second interface as the provider interface:

    Replace INTERFACE_NAME with the actual interface name. For example, eth1 or ens224.

    ubuntu or debian

    • Edit the /etc/network/interfaces file to contain the following:

      # The provider network interface
      auto INTERFACE_NAME
      iface  INTERFACE_NAME inet manual
      up ip link set dev $IFACE up
      down ip link set dev $IFACE down

    rdo

    • Edit the /etc/sysconfig/network-scripts/ifcfg-INTERFACE_NAME file to contain the following:

      Do not change the HWADDR and UUID keys.

      DEVICE=INTERFACE_NAME
      TYPE=Ethernet
      ONBOOT="yes"
      BOOTPROTO="none"

    obs

    • Edit the /etc/sysconfig/network/ifcfg-INTERFACE_NAME file to contain the following:

      STARTMODE='auto'
      BOOTPROTO='static'
  3. Reboot the system to activate the changes.

Configure name resolution

  1. Set the hostname of the node to compute1.