12 KiB
Create and manage networks
Before you run commands, set the following environment variables:
export OS_USERNAME=admin
export OS_PASSWORD=password
export OS_TENANT_NAME=admin
export OS_AUTH_URL=http://localhost:5000/v2.0Create networks
List the extensions of the system:
$ neutron ext-list -c alias -c name +-----------------+--------------------------+ | alias | name | +-----------------+--------------------------+ | agent_scheduler | Agent Schedulers | | binding | Port Binding | | quotas | Quota management support | | agent | agent | | provider | Provider Network | | router | Neutron L3 Router | | lbaas | LoadBalancing service | | extraroute | Neutron Extra Route | +-----------------+--------------------------+Create a network:
$ neutron net-create net1 Created a new network: +---------------------------+--------------------------------------+ | Field | Value | +---------------------------+--------------------------------------+ | admin_state_up | True | | id | 2d627131-c841-4e3a-ace6-f2dd75773b6d | | name | net1 | | provider:network_type | vlan | | provider:physical_network | physnet1 | | provider:segmentation_id | 1001 | | router:external | False | | shared | False | | status | ACTIVE | | subnets | | | tenant_id | 3671f46ec35e4bbca6ef92ab7975e463 | +---------------------------+--------------------------------------+Note
Some fields of the created network are invisible to non-admin users.
Create a network with specified provider network type.
$ neutron net-create net2 --provider:network-type local Created a new network: +---------------------------+--------------------------------------+ | Field | Value | +---------------------------+--------------------------------------+ | admin_state_up | True | | id | 524e26ea-fad4-4bb0-b504-1ad0dc770e7a | | name | net2 | | provider:network_type | local | | provider:physical_network | | | provider:segmentation_id | | | router:external | False | | shared | False | | status | ACTIVE | | subnets | | | tenant_id | 3671f46ec35e4bbca6ef92ab7975e463 | +---------------------------+--------------------------------------+Just as shown previously, the unknown option
--provider:network-typeis used to create alocalprovider network.
Create subnets
Create a subnet:
$ neutron subnet-create net1 192.168.2.0/24 --name subnet1
Created a new subnet:
+------------------+--------------------------------------------------+
| Field | Value |
+------------------+--------------------------------------------------+
| allocation_pools | {"start": "192.168.2.2", "end": "192.168.2.254"} |
| cidr | 192.168.2.0/24 |
| dns_nameservers | |
| enable_dhcp | True |
| gateway_ip | 192.168.2.1 |
| host_routes | |
| id | 15a09f6c-87a5-4d14-b2cf-03d97cd4b456 |
| ip_version | 4 |
| name | subnet1 |
| network_id | 2d627131-c841-4e3a-ace6-f2dd75773b6d |
| tenant_id | 3671f46ec35e4bbca6ef92ab7975e463 |
+------------------+--------------------------------------------------+The subnet-create command has the following positional
and optional parameters:
The name or ID of the network to which the subnet belongs.
In this example,
net1is a positional argument that specifies the network name.The CIDR of the subnet.
In this example,
192.168.2.0/24is a positional argument that specifies the CIDR.The subnet name, which is optional.
In this example,
--name subnet1specifies the name of the subnet.
For information and examples on more advanced use of neutron's
subnet subcommand, see the OpenStack
Administrator Guide.
Create routers
Create a router:
$ neutron router-create router1 Created a new router: +-----------------------+--------------------------------------+ | Field | Value | +-----------------------+--------------------------------------+ | admin_state_up | True | | external_gateway_info | | | id | 6e1f11ed-014b-4c16-8664-f4f615a3137a | | name | router1 | | status | ACTIVE | | tenant_id | 7b5970fbe7724bf9b74c245e66b92abf | +-----------------------+--------------------------------------+Take note of the unique router identifier returned, this will be required in subsequent steps.
Link the router to the external provider network:
$ neutron router-gateway-set ROUTER NETWORKReplace ROUTER with the unique identifier of the router, replace NETWORK with the unique identifier of the external provider network.
Link the router to the subnet:
$ neutron router-interface-add ROUTER SUBNETReplace ROUTER with the unique identifier of the router, replace SUBNET with the unique identifier of the subnet.
Create ports
Create a port with specified IP address:
$ neutron port-create net1 --fixed-ip ip_address=192.168.2.40 Created a new port: +----------------------+----------------------------------------------------------------------+ | Field | Value | +----------------------+----------------------------------------------------------------------+ | admin_state_up | True | | binding:capabilities | {"port_filter": false} | | binding:vif_type | ovs | | device_id | | | device_owner | | | fixed_ips | {"subnet_id": "15a09f6c-87a5-4d14-b2cf-03d97cd4b456", "ip_address... | | id | f7a08fe4-e79e-4b67-bbb8-a5002455a493 | | mac_address | fa:16:3e:97:e0:fc | | name | | | network_id | 2d627131-c841-4e3a-ace6-f2dd75773b6d | | status | DOWN | | tenant_id | 3671f46ec35e4bbca6ef92ab7975e463 | +----------------------+----------------------------------------------------------------------+In the previous command,
net1is the network name, which is a positional argument.--fixed-ip ip_address=192.168.2.40is an option which specifies the port's fixed IP address we wanted.Note
When creating a port, you can specify any unallocated IP in the subnet even if the address is not in a pre-defined pool of allocated IP addresses (set by your cloud provider).
Create a port without specified IP address:
$ neutron port-create net1 Created a new port: +----------------------+----------------------------------------------------------------------+ | Field | Value | +----------------------+----------------------------------------------------------------------+ | admin_state_up | True | | binding:capabilities | {"port_filter": false} | | binding:vif_type | ovs | | device_id | | | device_owner | | | fixed_ips | {"subnet_id": "15a09f6c-87a5-4d14-b2cf-03d97cd4b456", "ip_address... | | id | baf13412-2641-4183-9533-de8f5b91444c | | mac_address | fa:16:3e:f6:ec:c7 | | name | | | network_id | 2d627131-c841-4e3a-ace6-f2dd75773b6d | | status | DOWN | | tenant_id | 3671f46ec35e4bbca6ef92ab7975e463 | +----------------------+----------------------------------------------------------------------+Note
Note that the system allocates one IP address if you do not specify an IP address in the
neutron port-createcommand.Note
You can specify a MAC address with
--mac-address MAC_ADDRESS. If you specify an invalid MAC address, including00:00:00:00:00:00orff:ff:ff:ff:ff:ff, you will get an error.Query ports with specified fixed IP addresses:
$ neutron port-list --fixed-ips ip_address=192.168.2.2 \ ip_address=192.168.2.40 +----------------+------+-------------------+-------------------------------------------------+ | id | name | mac_address | fixed_ips | +----------------+------+-------------------+-------------------------------------------------+ | baf13412-26... | | fa:16:3e:f6:ec:c7 | {"subnet_id"... ..."ip_address": "192.168.2.2"} | | f7a08fe4-e7... | | fa:16:3e:97:e0:fc | {"subnet_id"... ..."ip_address": "192.168.2.40"}| +----------------+------+-------------------+-------------------------------------------------+--fixed-ips ip_address=192.168.2.2 ip_address=192.168.2.40is one unknown option.
How to find unknown options The unknown options can
be easily found by watching the output of create_xxx or show_xxx command. For example, in the port
creation command, we see the fixed_ips fields, which can be used as an
unknown option.