Andreas Jaeger 0a4e814f50 Gate at RST line length of 79 chars

With this patch, the RST files have no line longer than 79 chars -
as discussed on the docs mailing list - and we
can gate on it. Previously this limit was 100 chars.

Change-Id: I23f550db81e9264649d0444f5f1ba1be0d6d343d

2015-06-20 21:17:26 +02:00

7.9 KiB

Raw Blame History

Launch and manage instances

Instances are virtual machines that run inside the cloud. You can launch an instance from the following sources:

Images uploaded to the OpenStack Image service.
Image that you have copied to a persistent volume. The instance launches from the volume, which is provided by the cinder-volume API through iSCSI.

Launch an instance

When you launch an instance from a volume, note the following steps:

To select the volume to from which to launch, launch an instance from an arbitrary image on the volume. The image that you select does not boot. Instead, it is replaced by the image on the volume that you choose in the next steps.

To boot a Xen image from a volume, the image you launch in must be the same type, fully virtualized or paravirtualized, as the one on the volume.
Select the volume or volume snapshot from which to boot. Enter a device name. Enter vda for KVM images or xvda for Xen images.

When you launch an instance from an image, OpenStack creates a local copy of the image on the compute node where the instance starts.

Log in to the dashboard, choose a project, and click Images.

The dashboard shows the images that have been uploaded to OpenStack Image service and are available for this project.

For details on creating images, see Creating images manually in the OpenStack Virtual Machine Image Guide.
Select an image and click Launch.
In the Launch Instance dialog box, specify the following values:

Details tab

Availability Zone

By default, this value is set to the availability zone given by the cloud provider (for example, us-west or apac-south). For some cases, it could be nova.

Instance Name

Assign a name to the virtual machine.

Note

The name you assign here becomes the initial host name of the server.

After the server is built, if you change the server name in the API or change the host name directly, the names are not updated in the dashboard.

Server names are not guaranteed to be unique when created so you could have two instances with the same host name.

Flavor

Specify the size of the instance to launch.

Note

The flavor is selected based on the size of the image selected for launching an instance. For example, while creating an image, if you have entered the value in the Minimum RAM (MB) field as 2048, then on selecting the image, the default flavor is m1.small.

Instance Count

To launch multiple instances, enter a value greater than 1. The default is 1.

Instance Boot Source

Your options are:

Boot from image

If you choose this option, a new field for Image Name displays. You can select the image from the list.

Boot from snapshot

If you choose this option, a new field for Instance Snapshot displays. You can select the snapshot from the list.

Boot from volume

If you choose this option, a new field for Volume displays. You can select the volume from the list.

Boot from image (creates a new volume)

With this option, you can boot from an image and create a volume by entering the Device Size and Device Name for your volume. Click the Delete on Terminate option to delete the volume on terminating the instance.

Boot from volume snapshot (creates a new volume)

Using this option, you can boot from a volume snapshot and create a new volume by choosing Volume Snapshot from a list and adding a Device Name for your volume. Click the Delete on Terminate option to delete the volume on terminating the instance.

Since you are launching an instance from an image, Boot from image is chosen by default.

Image Name

This field changes based on your previous selection. Since you have chosen to launch an instance using an image, the Image Name field displays. Select the image name from the dropdown list.

Access & Security tab

Keypair

Specify a key pair.

If the image uses a static root password or a static key set (neither is recommended), you do not need to provide a key pair to launch the instance.

Security Groups

Activate the security groups that you want to assign to the instance.

Security groups are a kind of cloud firewall that define which incoming network traffic is forwarded to instances.

If you have not created any security groups, you can assign only the default security group to the instance.

Networking tab

Selected Networks

To add a network to the instance, click the + in the Available Networks field.

Post-Creation tab

Customization Script

Specify a customization script that runs after your instance launches.

Advanced Options tab

Disk Partition

Select the type of disk partition from the dropdown list:

Automatic

Entire disk is single partition and automatically resizes.

Manual

Faster build times but requires manual partitioning.
Click Launch.

The instance starts on a compute node in the cloud.

The Instances tab shows the instance's name, its private and public IP addresses, size, status, task, and power state.

If you did not provide a key pair, security groups, or rules, users can access the instance only from inside the cloud through VNC. Even pinging the instance is not possible without an ICMP rule configured.

Connect to your instance by using SSH

To use SSH to connect to your instance, you use the downloaded keypair file.

Note

The user name is ubuntu for the Ubuntu cloud images on TryStack.

Copy the IP address for your instance.
Use the ssh command to make a secure connection to the instance. For example:
```
$ ssh -i MyKey.pem ubuntu@10.0.0.2
```
At the prompt, type yes.

Track usage for instances

You can track usage for instances for each project. You can track costs per month by showing meters like number of vCPUs, disks, RAM, and uptime for all your instances.

Log in to the dashboard, choose a project, and click Overview.
To query the instance usage for a month, select a month and click Submit.
To download a summary, click Download CSV Summary.

Create an instance snapshot

Log in to the dashboard, choose a project, and click Instances.
Select the instance from which to create a snapshot.
In the Actions column, click Create Snapshot.
In the Create Snapshot dialog box, enter a name for the snapshot, and click Create Snapshot.

The Images category shows the instance snapshot.

To launch an instance from the snapshot, select the snapshot and click Launch. Proceed with launching an instance.

Manage an instance

Log in to the dashboard, choose a project, and click Instances.
Select an instance.
In the More list in the Actions column, select the state.

You can resize or rebuild an instance. You can also choose to view the instance console log, edit instance or the security groups. Depending on the current state of the instance, you can pause, resume, suspend, soft or hard reboot, or terminate it.

7.9 KiB Raw Blame History