Lana Brindley 7327056123 Add note about dropping DHCP responses

As per bug, adding note about security groups automatically dropping
DHCP responses from instances.

Change-Id: I3f01ebc8ace3fa2a6708de1c8dc7817e3c987c76
Closes-Bug: #1391360

2016-12-08 04:42:44 +00:00

7.4 KiB

Raw Blame History

Configure access and security for instances

When you launch a virtual machine, you can inject a key pair, which provides SSH access to your instance. For this to work, the image must contain the cloud-init package.

You can create at least one key pair for each project. You can use the key pair for multiple instances that belong to that project. If you generate a key pair with an external tool, you can import it into OpenStack.

Note

A key pair belongs to an individual user, not to a project. To share a key pair across multiple users, each user needs to import that key pair.

If an image uses a static root password or a static key set (neither is recommended), you must not provide a key pair when you launch the instance.

A security group is a named collection of network access rules that are use to limit the types of traffic that have access to instances. When you launch an instance, you can assign one or more security groups to it. If you do not create security groups, new instances are automatically assigned to the default security group, unless you explicitly specify a different security group.

The associated rules in each security group control the traffic to instances in the group. Any incoming traffic that is not matched by a rule is denied access by default. You can add rules to or remove rules from a security group, and you can modify rules for the default and any other security group.

You can modify the rules in a security group to allow access to instances through different ports and protocols. For example, you can modify rules to allow access to instances through SSH, to ping instances, or to allow UDP traffic; for example, for a DNS server running on an instance. You specify the following parameters for rules:

Source of traffic. Enable traffic to instances from either IP addresses inside the cloud from other group members or from all IP addresses.
Protocol. Choose TCP for SSH, ICMP for pings, or UDP.
Destination port on virtual machine. Define a port range. To open a single port only, enter the same value twice. ICMP does not support ports; instead, you enter values to define the codes and types of ICMP traffic to be allowed.

Rules are automatically enforced as soon as you create or modify them.

Note

Instances that use the default security group cannot, by default, be accessed from any IP address outside of the cloud. If you want those IP addresses to access the instances, you must modify the rules for the default security group. Additionally, security groups will automatically drop DHCP responses coming from instances.

You can also assign a floating IP address to a running instance to make it accessible from outside the cloud. See cli-manage-ip-addresses.

Add a key pair

You can generate a key pair or upload an existing public key.

To generate a key pair, run the following command.
```
$ openstack keypair create KEY_NAME > MY_KEY.pem
```
This command generates a key pair with the name that you specify for KEY_NAME, writes the private key to the .pem file that you specify, and registers the public key to the Nova database.
To set the permissions of the .pem file so that only you can read and write to it, run the following command.
```
$ chmod 600 MY_KEY.pem
```

Import a key pair

If you have already generated a key pair and the public key is located at ~/.ssh/id_rsa.pub, run the following command to upload the public key.
```
$ openstack keypair create --public-key ~/.ssh/id_rsa.pub KEY_NAME
```
This command registers the public key at the Nova database and names the key pair the name that you specify for KEY_NAME.
To ensure that the key pair has been successfully imported, list key pairs as follows:
```
$ openstack keypair list
```

Create and manage security groups

To list the security groups for the current project, including descriptions, enter the following command:
```
$ openstack security group list
```
To create a security group with a specified name and description, enter the following command:
```
$ openstack security group create SECURITY_GROUP_NAME --description GROUP_DESCRIPTION
```
To delete a specified group, enter the following command:
```
$ openstack security group delete SECURITY_GROUP_NAME
```

Note

You cannot delete the default security group for a project. Also, you cannot delete a security group that is assigned to a running instance.

Create and manage security group rules

Modify security group rules with the openstack security group rule commands. Before you begin, source the OpenStack RC file. For details, see ../common/cli-set-environment-variables-using-openstack-rc.

To list the rules for a security group, run the following command:
```
$ openstack security group rule list SECURITY_GROUP_NAME
```
To allow SSH access to the instances, choose one of the following options:
- Allow access from all IP addresses, specified as IP subnet 0.0.0.0/0 in CIDR notation:
```
$ openstack security group rule create SECURITY_GROUP_NAME \
      --protocol tcp --dst-port 22:22 --remote-ip 0.0.0.0/0
```
- Allow access only from IP addresses from other security groups (source groups) to access the specified port:
```
$ openstack security group rule create SECURITY_GROUP_NAME \
      --protocol tcp --dst-port 22:22 --remote-group SOURCE_GROUP_NAME
```
To allow pinging of the instances, choose one of the following options:
- Allow pinging from all IP addresses, specified as IP subnet 0.0.0.0/0 in CIDR notation.
```
$ openstack security group rule create SECURITY_GROUP_NAME \
    --protocol icmp --dst-port -1:-1 --remote-ip 0.0.0.0/0
```
  This allows access to all codes and all types of ICMP traffic.
- Allow only members of other security groups (source groups) to ping instances.
```
$ openstack security group rule create SECURITY_GROUP_NAME \
    --protocol icmp --dst-port -1:-1 --remote-group SOURCE_GROUP_NAME
```
To allow access through a UDP port, such as allowing access to a DNS server that runs on a VM, choose one of the following options:
- Allow UDP access from IP addresses, specified as IP subnet 0.0.0.0/0 in CIDR notation.
```
$ openstack security group rule create SECURITY_GROUP_NAME \
      --protocol udp --dst-port 53:53 --remote-ip 0.0.0.0/0
```
- Allow only IP addresses from other security groups (source groups) to access the specified port.
```
$ openstack security group rule create SECURITY_GROUP_NAME \
      --protocol udp --dst-port 53:53 --remote-group SOURCE_GROUP_NAME
```

Delete a security group rule

To delete a security group rule, specify the ID of the rule.

$ openstack security group rule delete RULE_ID

7.4 KiB Raw Blame History

Configure access and security for instances

Add a key pair

Import a key pair

Create and manage security groups

Create and manage security group rules

Delete a security group rule

7.4 KiB

Raw Blame History