openstack/openstack-manuals
Code Issues Proposed changes
Files
cf9cfc73bf99d764adcdb8ca490b768165e5473b
openstack-manuals/doc/install-guide/source/environment-ntp-other.rst
Matthew Kassawara 677d910899 [install] Fix environment structure 
Address various structure and consistency issues with
environment content.

This patch only addresses the critical structure and
consistency problems that impact usability. A future
patch should address the larger, but less obvious problems
that mostly appeared during the RST conversion.

Change-Id: Iae586b4cc8943abedca3c09820d0fb5370b5a858
Implements: blueprint installguide-liberty
2015-10-05 14:10:11 -05:00

1.5 KiB
Raw Blame History

Other nodes

Install and configure components

Install the packages:

ubuntu or debian

# apt-get install chrony

rdo

# yum install chrony

obs

On openSUSE:

# zypper addrepo http://download.opensuse.org/repositories/network:time/openSUSE_13.2/network:time.repo
# zypper refresh
# zypper install chrony

On SLES:

# zypper addrepo http://download.opensuse.org/repositories/network:time/SLE_12/network:time.repo
# zypper refresh
# zypper install chrony

Configure the network and compute nodes to reference the controller node.

ubuntu or debian

  1. Edit the /etc/chrony/chrony.conf file and comment out or remove all but one server key. Change it to reference the controller node:

    server controller iburst

  2. Restart the NTP service:

    # service chrony restart

rdo or obs

  1. Edit the /etc/chrony.conf file and comment out or remove all but one server key. Change it to reference the controller node:

    server controller iburst

  2. Start the NTP service and configure it to start when the system boots:

    # systemctl enable chronyd.service
# systemctl start chronyd.service