openstack-manuals/doc/install-guide/source/environment-networking-controller.rst
Petr Kovar 7c7791c66d [install] General edits for install guide
* Update links to point to pike content
* Improve titles and ToC
* Remove Debian
* Fix formatting
* Update repo url for Pike
* Edit openstack-services

Change-Id: I258d6ce980b0b3408d88b40e487f3079c2b55cdb
2017-08-29 15:57:24 +00:00

75 lines
1.7 KiB
ReStructuredText

Controller node
~~~~~~~~~~~~~~~
Configure network interfaces
----------------------------
#. Configure the first interface as the management interface:
IP address: 10.0.0.11
Network mask: 255.255.255.0 (or /24)
Default gateway: 10.0.0.1
#. The provider interface uses a special configuration without an IP
address assigned to it. Configure the second interface as the provider
interface:
Replace ``INTERFACE_NAME`` with the actual interface name. For example,
*eth1* or *ens224*.
For Ubuntu:
* Edit the ``/etc/network/interfaces`` file to contain the following:
.. path /etc/network/interfaces
.. code-block:: bash
# The provider network interface
auto INTERFACE_NAME
iface INTERFACE_NAME inet manual
up ip link set dev $IFACE up
down ip link set dev $IFACE down
.. end
For RHEL or CentOS:
* Edit the ``/etc/sysconfig/network-scripts/ifcfg-INTERFACE_NAME`` file
to contain the following:
Do not change the ``HWADDR`` and ``UUID`` keys.
.. path /etc/sysconfig/network-scripts/ifcfg-INTERFACE_NAME
.. code-block:: ini
DEVICE=INTERFACE_NAME
TYPE=Ethernet
ONBOOT="yes"
BOOTPROTO="none"
.. end
For SUSE:
* Edit the ``/etc/sysconfig/network/ifcfg-INTERFACE_NAME`` file to
contain the following:
.. path /etc/sysconfig/network/ifcfg-INTERFACE_NAME
.. code-block:: ini
STARTMODE='auto'
BOOTPROTO='static'
.. end
#. Reboot the system to activate the changes.
Configure name resolution
-------------------------
#. Set the hostname of the node to ``controller``.
#. .. include:: shared/edit_hosts_file.txt