openstack-manuals/doc/install-guide/source/neutron-verify.rst

74 lines
3.6 KiB
ReStructuredText

Verify operation
~~~~~~~~~~~~~~~~
.. note::
Perform these commands on the controller node.
#. Source the ``admin`` credentials to gain access to admin-only CLI
commands:
.. code-block:: console
$ . admin-openrc
.. end
#. List loaded extensions to verify successful launch of the
``neutron-server`` process:
.. code-block:: console
$ neutron ext-list
+---------------------------+-----------------------------------------------+
| alias | name |
+---------------------------+-----------------------------------------------+
| default-subnetpools | Default Subnetpools |
| network-ip-availability | Network IP Availability |
| network_availability_zone | Network Availability Zone |
| auto-allocated-topology | Auto Allocated Topology Services |
| ext-gw-mode | Neutron L3 Configurable external gateway mode |
| binding | Port Binding |
| agent | agent |
| subnet_allocation | Subnet Allocation |
| l3_agent_scheduler | L3 Agent Scheduler |
| tag | Tag support |
| external-net | Neutron external network |
| net-mtu | Network MTU |
| availability_zone | Availability Zone |
| quotas | Quota management support |
| l3-ha | HA Router extension |
| flavors | Neutron Service Flavors |
| provider | Provider Network |
| multi-provider | Multi Provider Network |
| address-scope | Address scope |
| extraroute | Neutron Extra Route |
| timestamp_core | Time Stamp Fields addition for core resources |
| router | Neutron L3 Router |
| extra_dhcp_opt | Neutron Extra DHCP opts |
| dns-integration | DNS Integration |
| security-group | security-group |
| dhcp_agent_scheduler | DHCP Agent Scheduler |
| router_availability_zone | Router Availability Zone |
| rbac-policies | RBAC Policies |
| standard-attr-description | standard-attr-description |
| port-security | Port Security |
| allowed-address-pairs | Allowed Address Pairs |
| dvr | Distributed Virtual Router |
+---------------------------+-----------------------------------------------+
.. end
.. note::
Actual output may differ slightly from this example.
Use the verification section for the networking option that you chose to
deploy.
.. toctree::
neutron-verify-option1.rst
neutron-verify-option2.rst