openstack/openstack-manuals
Code Issues Proposed changes
de49069b09
openstack-manuals/doc/install-guide/source/environment-networking-controller.rst
Petr Kovar 7c7791c66d [install] General edits for install guide 
* Update links to point to pike content
* Improve titles and ToC
* Remove Debian
* Fix formatting
* Update repo url for Pike
* Edit openstack-services

Change-Id: I258d6ce980b0b3408d88b40e487f3079c2b55cdb
2017-08-29 15:57:24 +00:00

1.7 KiB
Raw Blame History

Controller node

Configure network interfaces

  1. Configure the first interface as the management interface:

    IP address: 10.0.0.11

    Network mask: 255.255.255.0 (or /24)

    Default gateway: 10.0.0.1

  2. The provider interface uses a special configuration without an IP address assigned to it. Configure the second interface as the provider interface:

    Replace INTERFACE_NAME with the actual interface name. For example, eth1 or ens224.

    For Ubuntu:

    • Edit the /etc/network/interfaces file to contain the following:

      # The provider network interface
auto INTERFACE_NAME
iface INTERFACE_NAME inet manual
up ip link set dev $IFACE up
down ip link set dev $IFACE down

    For RHEL or CentOS:

    • Edit the /etc/sysconfig/network-scripts/ifcfg-INTERFACE_NAME file to contain the following:

      Do not change the HWADDR and UUID keys.

      DEVICE=INTERFACE_NAME
TYPE=Ethernet
ONBOOT="yes"
BOOTPROTO="none"

    For SUSE:

    • Edit the /etc/sysconfig/network/ifcfg-INTERFACE_NAME file to contain the following:

      STARTMODE='auto'
BOOTPROTO='static'

  3. Reboot the system to activate the changes.

Configure name resolution

  1. Set the hostname of the node to controller.