venkatamahesh e676eda7c2 [Image-guide] Fix the RST mark-ups

In this patch I added the RST mark-ups and 'the' article
whereever needed

Change-Id: I9dd8f8bda5a22b6e50adc1f839dfa586f7c17b24

2015-12-10 19:05:41 +05:30

3.3 KiB

Raw Blame History

Example: Microsoft Windows image

This example creates a Windows Server 2012 qcow2 image, using the virt-install command and the KVM hypervisor.

Follow these steps to prepare the installation:
1. Download a Windows Server 2012 installation ISO. Evaluation images are available on the Microsoft website <http://www.microsoft.com/en-us/evalcenter/ evaluate-windows-server-2012> (registration required).
2. Download the signed VirtIO drivers ISO from the Fedora website <https://fedoraproject.org/wiki/ Windows_Virtio_Drivers#Direct_download>.
3. Create a 15 GB qcow2 image:
```
$ qemu-img create -f qcow2 ws2012.qcow2 15G
```

Start the Windows Server 2012 installation with the virt-install command:

# virt-install --connect qemu:///system \
  --name ws2012 --ram 2048 --vcpus 2 \
  --network network=default,model=virtio \
  --disk path=ws2012.qcow2,format=qcow2,device=disk,bus=virtio \
  --cdrom /path/to/en_windows_server_2012_x64_dvd.iso \
  --disk path=/path/to/virtio-win-0.1-XX.iso,device=cdrom \
  --vnc --os-type windows --os-variant win2k8

Use virt-manager or virt-viewer to connect to the VM and start the Windows installation.

Enable the VirtIO drivers.

The disk is not detected by default by the Windows installer. When requested to choose an installation target, click Load driver and browse the file system to select the E:\WIN8\AMD64 folder. The Windows installer displays a list of drivers to install. Select the VirtIO SCSI and network drivers, and continue the installation.

Once the installation is completed, the VM restarts. Define a password for the administrator when prompted.
Log in as administrator and start a command window.
Complete the VirtIO drivers installation by running the following command:
```
C:\pnputil -i -a E:\WIN8\AMD64\*.INF
```
To allow the Cloudbase-Init to run scripts during an instance boot, set the PowerShell execution policy to be unrestricted:
```
C:\powershell
C:\Set-ExecutionPolicy Unrestricted
```
Download and install the Cloudbase-Init:
```
C:\Invoke-WebRequest -UseBasicParsing http://www.cloudbase.it/downloads/CloudbaseInitSetup_Stable_x64.msi -OutFile cloudbaseinit.msi
C:\.\cloudbaseinit.msi
```
In the configuration options window, change the following settings:
- Username: Administrator
- Network adapter to configure: Red Hat VirtIO Ethernet Adapter
- Serial port for logging: COM1
When the installation is done, in the Complete the Cloudbase-Init Setup Wizard window, select the Run Sysprep and Shutdown check boxes and click Finish.

Wait for the machine shutdown.

Your image is ready to upload to the Image service:

$ glance image-create --name WS2012 --disk-format qcow2 \
  --container-format bare --is-public true \
  --file ws2012.qcow2

3.3 KiB Raw Blame History

Example: Microsoft Windows image

3.3 KiB

Raw Blame History