openstack-manuals/doc/install-guide/source/environment-networking-controller.rst
Andreas Jaeger 2d44b2b36d Prepare for Sphinx 1.5
The new sphinx version introduces some changes that break build:

* Warns if code cannot be parsed for highlighting. Fix the code so
  that it can be parsed, this includes uncommenting "..." lines.
  Note that not every config file is an ini-file.
  Also, the parser seems to have bugs and cannot parse all files.
  Fix mysql ini file and enable the parameter, see
http://dev.mysql.com/doc/refman/5.7/en/innodb-parameters.html#sysvar_innodb_file_per_table
* :option: works only with declared options, replace useage with
  simple ``.

This change only handles a few files, more to come later.

Change-Id: I7c7335e514581622dd562ee355f62d6ae1beaa18
2017-01-11 20:37:55 +01:00

81 lines
1.8 KiB
ReStructuredText

Controller node
~~~~~~~~~~~~~~~
Configure network interfaces
----------------------------
#. Configure the first interface as the management interface:
IP address: 10.0.0.11
Network mask: 255.255.255.0 (or /24)
Default gateway: 10.0.0.1
#. The provider interface uses a special configuration without an IP
address assigned to it. Configure the second interface as the provider
interface:
Replace ``INTERFACE_NAME`` with the actual interface name. For example,
*eth1* or *ens224*.
.. only:: ubuntu or debian
* Edit the ``/etc/network/interfaces`` file to contain the following:
.. path /etc/network/interfaces
.. code-block:: bash
# The provider network interface
auto INTERFACE_NAME
iface INTERFACE_NAME inet manual
up ip link set dev $IFACE up
down ip link set dev $IFACE down
.. end
.. endonly
.. only:: rdo
* Edit the ``/etc/sysconfig/network-scripts/ifcfg-INTERFACE_NAME`` file
to contain the following:
Do not change the ``HWADDR`` and ``UUID`` keys.
.. path /etc/sysconfig/network-scripts/ifcfg-INTERFACE_NAME
.. code-block:: ini
DEVICE=INTERFACE_NAME
TYPE=Ethernet
ONBOOT="yes"
BOOTPROTO="none"
.. end
.. endonly
.. only:: obs
* Edit the ``/etc/sysconfig/network/ifcfg-INTERFACE_NAME`` file to
contain the following:
.. path /etc/sysconfig/network/ifcfg-INTERFACE_NAME
.. code-block:: ini
STARTMODE='auto'
BOOTPROTO='static'
.. end
.. endonly
#. Reboot the system to activate the changes.
Configure name resolution
-------------------------
#. Set the hostname of the node to ``controller``.
#. .. include:: shared/edit_hosts_file.txt