60 lines
2.6 KiB
Plaintext
60 lines
2.6 KiB
Plaintext
# Cisco Nexus Switch configurations.
|
|
# Each switch to be managed by Openstack Neutron must be configured here.
|
|
#
|
|
# Cisco Nexus Switch Format.
|
|
# [ml2_mech_cisco_nexus:<IP address of switch>]
|
|
# <hostname>=<intf_type:port> (1)
|
|
# ssh_port=<ssh port> (2)
|
|
# username=<credential username> (3)
|
|
# password=<credential password> (4)
|
|
# nve_src_intf=<loopback number> (5)
|
|
# physnet=<physical network> (6)
|
|
#
|
|
# (1) For each host connected to a port on the switch, specify the hostname
|
|
# and the Nexus physical port (interface) it is connected to.
|
|
# Valid intf_type's are 'ethernet' and 'port-channel'.
|
|
# The default setting for <intf_type:> is 'ethernet' and need not be
|
|
# added to this setting.
|
|
# (2) The TCP port for connecting via SSH to manage the switch. This is
|
|
# port number 22 unless the switch has been configured otherwise.
|
|
# (3) The username for logging into the switch to manage it.
|
|
# (4) The password for logging into the switch to manage it.
|
|
# (5) Only valid if VXLAN overlay is configured and vxlan_global_config is
|
|
# set to True.
|
|
# The NVE source interface is a loopback interface that is configured on
|
|
# the switch with valid /32 IP address. This /32 IP address must be known
|
|
# by the transient devices in the transport network and the remote VTEPs.
|
|
# This is accomplished by advertising it through a dynamic routing protocol
|
|
# in the transport network. (NB: If no nve_src_intf is defined then a
|
|
# default setting of 0 (creates "loopback0") will be used.)
|
|
# (6) Only valid if VXLAN overlay is configured.
|
|
# The physical network name defined in the network_vlan_ranges variable
|
|
# (defined under the ml2_type_vlan section) that this switch is controlling.
|
|
# The configured 'physnet' is the physical network domain that is connected
|
|
# to this switch. The vlan ranges defined in network_vlan_ranges for a
|
|
# a physical network are allocated dynamically and are unique per physical
|
|
# network. These dynamic vlans may be reused across physical networks.
|
|
#
|
|
# Example:
|
|
# [ml2_mech_cisco_nexus:1.1.1.1]
|
|
# compute1=1/1
|
|
# compute2=ethernet:1/2
|
|
# compute3=port-channel:1
|
|
# ssh_port=22
|
|
# username=admin
|
|
# password=mySecretPassword
|
|
# nve_src_intf=1
|
|
# physnet=physnet1
|
|
|
|
<% @nexus_config.each do |switch_hostname, switch_data| %>
|
|
[ML2_MECH_CISCO_NEXUS:<%= switch_data['ip_address'] %>]
|
|
<%- switch_data['servers'].each do |host_name, port| -%>
|
|
<%=host_name-%>=<%= port %>
|
|
<%- end -%>
|
|
ssh_port=<%= switch_data['ssh_port'] %>
|
|
username=<%= switch_data['username'] %>
|
|
password=<%= switch_data['password'] %>
|
|
nve_src_intf=<%= switch_data['nve_src_intf'] %>
|
|
physnet=<%= switch_data['physnet'] %>
|
|
<% end %>
|