puppet-neutron/manifests/plugins/ml2.pp
Tobias Urdin 5758b34e4b Remove deprecated firewall_driver
Depends-On: https://review.opendev.org/743980
Change-Id: Ia2c7c7ca12d381144c87345dde0415a4e775444d
2020-07-30 16:10:37 +02:00

225 lines
8.3 KiB
Puppet

#
# Copyright (C) 2013 eNovance SAS <licensing@enovance.com>
#
# Author: Emilien Macchi <emilien.macchi@enovance.com>
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
# Configure the neutron server to use the ML2 plugin.
# This configures the plugin for the API server, but does nothing
# about configuring the agents that must also run and share a config
# file with the OVS plugin if both are on the same machine.
#
# === Parameters
#
# [*type_drivers*]
# (optional) List of network type driver entrypoints to be loaded
# from the neutron.ml2.type_drivers namespace.
# Could be an array that can have these elements:
# local, flat, vlan, gre, vxlan, geneve
# Defaults to ['local', 'flat', 'vlan', 'gre', 'vxlan', 'geneve'].
#
# [*extension_drivers*]
# (optional) Ordered list of extension driver entrypoints to be loaded
# from the neutron.ml2.extension_drivers namespace.
# Defaults to $::os_service_default
#
# [*tenant_network_types*]
# (optional) Ordered list of network_types to allocate as tenant networks.
# The value 'local' is only useful for single-box testing
# but provides no connectivity between hosts.
# Should be an array that can have these elements:
# local, flat, vlan, gre, vxlan
# Defaults to ['local', 'flat', 'vlan', 'gre', 'vxlan'].
#
# [*mechanism_drivers*]
# (optional) An ordered list of networking mechanism driver
# entrypoints to be loaded from the neutron.ml2.mechanism_drivers namespace.
# Should be an array that can have these elements:
# logger, test, linuxbridge, openvswitch, hyperv, ncs, arista, cisco_nexus,
# l2population, sriovnicswitch
# Default to ['openvswitch', 'linuxbridge'].
#
# [*flat_networks*]
# (optional) List of physical_network names with which flat networks
# can be created. Use * to allow flat networks with arbitrary
# physical_network names.
# Should be an array.
# Default to *.
#
# [*network_vlan_ranges*]
# (optional) List of <physical_network>:<vlan_min>:<vlan_max> or
# <physical_network> specifying physical_network names
# usable for VLAN provider and tenant networks, as
# well as ranges of VLAN tags on each available for
# allocation to tenant networks.
# Should be an array with vlan_min = 1 & vlan_max = 4094 (IEEE 802.1Q)
# Default to 'physnet1:1000:2999'.
#
# [*tunnel_id_ranges*]
# (optional) Comma-separated list of <tun_min>:<tun_max> tuples
# enumerating ranges of GRE tunnel IDs that are
# available for tenant network allocation
# Should be an array with tun_max +1 - tun_min > 1000000
# Default to '20:100'.
#
# [*vxlan_group*]
# (optional) Multicast group for VXLAN.
# Multicast group for VXLAN. If unset, disables VXLAN enable sending allocate
# broadcast traffic to this multicast group. When left unconfigured, will
# disable multicast VXLAN mode
# Should be an Multicast IP (v4 or v6) address.
# Default to '224.0.0.1'.
#
# [*vni_ranges*]
# (optional) Comma-separated list of <vni_min>:<vni_max> tuples
# enumerating ranges of VXLAN VNI IDs that are
# available for tenant network allocation.
# Min value is 0 and Max value is 16777215.
# Default to '10:100'.
#
# [*enable_security_group*]
# (optional) Controls if neutron security group is enabled or not.
# It should be false when you use nova security group.
# Defaults to $::os_service_default.
#
# [*package_ensure*]
# (optional) Ensure state for package.
# Defaults to 'present'.
#
# [*physical_network_mtus*]
# (optional) For L2 mechanism drivers, per-physical network MTU setting.
# Should be an array with 'physnetX1:9000'.
# Defaults to $::os_service_default.
#
# [*path_mtu*]
# (optional) For L3 mechanism drivers, determines the maximum permissible
# size of an unfragmented packet travelling from and to addresses where
# encapsulated traffic is sent.
# Defaults to 0.
#
# [*purge_config*]
# (optional) Whether to set only the specified config options
# in the ml2 config.
# Defaults to false.
#
# [*max_header_size*]
# (optional) Geneve encapsulation header size is dynamic, this value is used to calculate
# the maximum MTU for the driver.
# Defaults to $::os_service_default
#
# [*overlay_ip_version*]
# (optional) Configures the IP version used for all overlay network endpoints. Valid values
# are 4 and 6.
# Defaults to $::os_service_default
#
class neutron::plugins::ml2 (
$type_drivers = ['local', 'flat', 'vlan', 'gre', 'vxlan', 'geneve'],
$extension_drivers = $::os_service_default,
$tenant_network_types = ['local', 'flat', 'vlan', 'gre', 'vxlan'],
$mechanism_drivers = ['openvswitch', 'linuxbridge'],
$flat_networks = '*',
$network_vlan_ranges = 'physnet1:1000:2999',
$tunnel_id_ranges = '20:100',
$vxlan_group = '224.0.0.1',
$vni_ranges = '10:100',
$enable_security_group = $::os_service_default,
$package_ensure = 'present',
$physical_network_mtus = $::os_service_default,
$path_mtu = 0,
$purge_config = false,
$max_header_size = $::os_service_default,
$overlay_ip_version = $::os_service_default,
) {
include neutron::deps
include neutron::params
if ! $mechanism_drivers {
warning('Without networking mechanism driver, ml2 will not communicate with L2 agents')
}
# lint:ignore:only_variable_string
if !is_service_default($overlay_ip_version) and !("${overlay_ip_version}" in ['4', '6']) {
fail('Invalid IP version for overlay_ip_version')
}
# lint:endignore
if $::operatingsystem == 'Ubuntu' {
file_line { '/etc/default/neutron-server:NEUTRON_PLUGIN_CONFIG':
path => '/etc/default/neutron-server',
match => '^NEUTRON_PLUGIN_CONFIG=(.*)$',
line => 'NEUTRON_PLUGIN_CONFIG=/etc/neutron/plugin.ini',
tag => 'neutron-file-line'
}
}
# In RH, the link is used to start Neutron process but in Debian, it's used only
# to manage database synchronization.
file {'/etc/neutron/plugin.ini':
ensure => link,
target => '/etc/neutron/plugins/ml2/ml2_conf.ini',
tag => 'neutron-config-file',
}
file {'/etc/default/neutron-server':
ensure => present,
owner => 'root',
group => 'root',
mode => '0644',
tag => 'neutron-config-file',
}
# Some platforms do not have a dedicated ml2 plugin package
if $::neutron::params::ml2_server_package {
package { 'neutron-plugin-ml2':
ensure => $package_ensure,
name => $::neutron::params::ml2_server_package,
tag => ['openstack', 'neutron-package'],
}
}
resources { 'neutron_plugin_ml2':
purge => $purge_config,
}
neutron::plugins::ml2::type_driver { $type_drivers:
flat_networks => $flat_networks,
tunnel_id_ranges => $tunnel_id_ranges,
network_vlan_ranges => $network_vlan_ranges,
vni_ranges => $vni_ranges,
vxlan_group => $vxlan_group,
max_header_size => $max_header_size
}
neutron_plugin_ml2 {
'ml2/type_drivers': value => join(any2array($type_drivers), ',');
'ml2/tenant_network_types': value => join(any2array($tenant_network_types), ',');
'ml2/mechanism_drivers': value => join(any2array($mechanism_drivers), ',');
'ml2/path_mtu': value => $path_mtu;
'ml2/extension_drivers': value => join(any2array($extension_drivers), ',');
'ml2/overlay_ip_version': value => $overlay_ip_version;
'securitygroup/enable_security_group': value => $enable_security_group;
}
if is_service_default($physical_network_mtus) {
neutron_plugin_ml2 {
'ml2/physical_network_mtus': ensure => absent;
}
} else {
validate_legacy(Array, 'validate_array', $physical_network_mtus)
neutron_plugin_ml2 {
'ml2/physical_network_mtus': value => join($physical_network_mtus, ',');
}
}
}