lint: Fix lint issues (missing documentation for define types)

The gem 'puppet-lint-param-docs' was bumped to 1.2.0 and now handle
class and define type. This patch fix lint issues (missing documentation).

Change-Id: If3718cc533e6e81071aba191310552031508f132

manifests/ringbuilder/create.pp

@@ -7,7 +7,7 @@
 #  [*name*] The type of ring to create. Accepts object|container|account
 #  [*part_power*] Number of partitions in the ring. (specified as the power of 2)
 #    Optional. Defaults to 18 (2^18)
-#  [*replicas] Number of replicas to store.
+#  [*replicas*] Number of replicas to store.
 #    Optional. Defaults to 3
 #  [*min_part_hours*] Time before a partition can be moved.
 #    Optional. Defaults to 24.

manifests/ringsync.pp

@@ -1,5 +1,8 @@
 # == Define: swift::ringsync
 #
+# [*ring_server*]
+#   (required) IP or hostname of ring servers
+#
 define swift::ringsync(
   $ring_server
 ) {

manifests/storage/disk.pp

@@ -13,10 +13,21 @@
 # ATTENTION: You should not use the disk that your Operating System
 #            is installed on (typically /dev/sda/).
 #
-# =Parameters=
-# $base_dir = '/dev', assumes local disk devices
-# $mnt_base_dir = '/srv/node', base directory where disks are mounted to
-# $byte_size = '1024', block size for the disk.  For very large partitions, this should be larger
+# === Parameters:
+#
+# [*base_dir*]
+#   (optional) The directory where the flat files will be stored that house
+#   the file system to be loop back mounted.
+#   Defaults to '/dev', assumes local disk devices
+#
+# [*mnt_base_dir*]
+#   (optional) The directory where the flat files that store the file system
+#   to be loop back mounted are actually mounted at.
+#   Defaults to '/srv/node', base directory where disks are mounted to
+#
+# [*byte_size*]
+#   (optional) The byte size that dd uses when it creates the file system.
+#   Defaults to '1024', block size for the disk.  For very large partitions, this should be larger
 #
 # =Example=
 #

manifests/storage/ext4.pp

@@ -1,15 +1,27 @@
 # follow the instructions for creating a loopback device
 # for storage from: http://swift.openstack.org/development_saio.html
 #
-#
-#
 # this define needs to be sent a refresh signal to do anything
 #
+# === Parameters:
 #
-# [*title*]
+# [*device*]
+#   (mandatory) An array of devices (prefixed or not by /dev)
+#
+# [*mnt_base_dir*]
+#   (optional) The directory where the flat files that store the file system
+#   to be loop back mounted are actually mounted at.
+#   Defaults to '/srv/node', base directory where disks are mounted to
+#
+# [*byte_size*]
+#   (optional) The byte size that dd uses when it creates the file system.
+#   Defaults to '1024', block size for the disk.  For very large partitions, this should be larger
+#   It is recommened to use 1024 to ensure that the metadata can fit in a single inode.
+#
+# [*loopback*]
+#   (optional) Define if the device must be mounted as a loopback or not
+#   Defaults to false.
 #
-# [*byte_size*] Byte size to use for every inode in the created filesystem.
-#  It is recommened to use 1024 to ensure that the metadata can fit in a single inode.
 define swift::storage::ext4(
   $device,
   $byte_size    = '1024',

manifests/storage/filter/recon.pp

@@ -2,7 +2,7 @@
 # Configure swift recon.
 #
 # == Parameters
-#  [cache_path] The path for recon cache
+#  [*cache_path*] The path for recon cache
 #    Optional. Defaults to '/var/cache/swift/'
 #
 # == Dependencies

manifests/storage/loopback.pp

@@ -6,6 +6,30 @@
 #   - creates a file
 #   - formats the file to be an xfs device and mounts it as a loopback device at /srv/node/$name
 #   - sets up each mount point as a swift endpoint
+# === Parameters:
+#
+# [*base_dir*]
+#   (optional) The directory where the flat files will be stored that house
+#   the file system to be loop back mounted.
+#   Defaults to '/dev', assumes local disk devices
+#
+# [*mnt_base_dir*]
+#   (optional) The directory where the flat files that store the file system
+#   to be loop back mounted are actually mounted at.
+#   Defaults to '/srv/node', base directory where disks are mounted to
+#
+# [*byte_size*]
+#   (optional) The byte size that dd uses when it creates the file system.
+#   Defaults to '1024', block size for the disk.  For very large partitions, this should be larger
+#
+# [*seek*]
+#   (optional) The size of the file system that will be created.
+#    Defaults to 25000.
+#
+# [*fstype*]
+#   (optional) The filesystem type.
+#   Defaults to 'xfs'.
+#
 define swift::storage::loopback(
   $base_dir     = '/srv/loopback-device',
   $mnt_base_dir = '/srv/node',

manifests/storage/mount.pp

@@ -3,6 +3,24 @@
 #   swift::storage::mount
 #
 #
+# === Parameters:
+#
+# [*device*]
+#   (mandatory) An array of devices (prefixed or not by /dev)
+#
+# [*mnt_base_dir*]
+#   (optional) The directory where the flat files that store the file system
+#   to be loop back mounted are actually mounted at.
+#   Defaults to '/srv/node', base directory where disks are mounted to
+#
+# [*loopback*]
+#   (optional) Define if the device must be mounted as a loopback or not
+#   Defaults to false.
+#
+# [*fstype*]
+#   (optional) The filesystem type.
+#   Defaults to 'xfs'.
+#
 define swift::storage::mount(
   $device,
   $mnt_base_dir = '/srv/node',

manifests/storage/node.pp

@@ -4,6 +4,45 @@
 #   a storage endpoint for account, container, and object
 #   on the same mount point
 #
+# === Parameters:
+#
+# [*mnt_base_dir*]
+#   (optional) The directory where the flat files that store the file system
+#   to be loop back mounted are actually mounted at.
+#   Defaults to '/srv/node', base directory where disks are mounted to
+#
+# [*zone*]
+#   (required) Zone is the number of the zone this device is in.
+#   The zone parameter must be an integer.
+#
+# [*weight*]
+#   (optional) Weight is a float weight that determines how many partitions are
+#   put on the device relative to the rest of the devices in the cluster (a good
+#   starting point is 100.0xTB on the drive).
+#   Add each device that will be initially in the cluster.
+#   Defaults to 1.
+#
+# [*owner*]
+#   (optional) Owner (uid) of rsync server.
+#   Defaults to 'swift'.
+#
+# [*group*]
+#   (optional) Group (gid) of rsync server.
+#   Defaults to 'swift'.
+#
+# [*max_connections*]
+#   (optional) maximum number of simultaneous connections allowed.
+#   Defaults to 25.
+#
+# [*storage_local_net_ip*]
+#   (optional) The IP address of the storage server.
+#   Defaults to '127.0.0.1'.
+#
+# ==== DEPRECATED PARAMETERS
+#
+# [*manage_ring*]
+#   This parameter is deprecated and does nothing.
+#
 define swift::storage::node(
   $mnt_base_dir,
   $zone,
@@ -12,6 +51,7 @@ define swift::storage::node(
   $group  = 'swift',
   $max_connections = 25,
   $storage_local_net_ip = '127.0.0.1',
+  # DEPRECATED PARAMETERS
   $manage_ring = true
 ) {
 

manifests/storage/server.pp

@@ -8,23 +8,103 @@
 #   Mandatory. Usually 6000, 6001 and 6002 for respectively
 #   object, container and account.
 #
+# [*type*]
+#   (required) The type of device, e.g. account, object, or container.
+#
+# [*storage_local_net_ip*]
+#   (required) This is the ip that the storage service will bind to when it starts.
+#
+# [*devices*]
+#   (optional) The directory where the physical storage device will be mounted.
+#   Defaults to '/srv/node'.
+#
+# [*owner*]
+#   (optional) Owner (uid) of rsync server.
+#   Defaults to 'swift'.
+#
+# [*group*]
+#   (optional) Group (gid) of rsync server.
+#   Defaults to 'swift'.
+#
+# [*max_connections*]
+#   (optional) maximum number of simultaneous connections allowed.
+#   Defaults to 25.
+#
 # [*incoming_chmod*] Incoming chmod to set in the rsync server.
 #   Optional. Defaults to 0644 for maintaining backwards compatibility.
 #   *NOTE*: Recommended parameter: 'Du=rwx,g=rx,o=rx,Fu=rw,g=r,o=r'
-#    This mask translates to 0755 for directories and 0644 for files.
+#   This mask translates to 0755 for directories and 0644 for files.
 #
 # [*outgoing_chmod*] Outgoing chmod to set in the rsync server.
 #   Optional. Defaults to 0644 for maintaining backwards compatibility.
 #   *NOTE*: Recommended parameter: 'Du=rwx,g=rx,o=rx,Fu=rw,g=r,o=r'
-#    This mask translates to 0755 for directories and 0644 for files.
+#   This mask translates to 0755 for directories and 0644 for files.
 #
-#  [*log_udp_host*]
-#    (optional) If not set, the UDP receiver for syslog is disabled.
-#    Defaults to undef.
+
+# [*pipeline*]
+#   (optional) Pipeline of applications.
+#   Defaults to ["${type}-server"].
 #
-#  [*log_udp_port*]
-#    (optional) Port value for UDP receiver, if enabled.
-#    Defaults to undef.
+# [*mount_check*]
+#   (optional) Whether or not check if the devices are mounted to prevent accidentally
+#   writing to the root device
+#   Defaults to false.
+#
+# [*user*]
+#   (optional) User to run as
+#   Defaults to 'swift'.
+#
+# [*workers*]
+#   (optional) Override the number of pre-forked workers that will accept
+#   connections. If set it should be an integer, zero means no fork. If unset,
+#   it will try to default to the number of effective cpu cores and fallback to
+#   one. Increasing the number of workers may reduce the possibility of slow file
+#   system operations in one request from negatively impacting other requests.
+#   See http://docs.openstack.org/developer/swift/deployment_guide.html#general-service-tuning
+#   Defaults to '1'.
+#
+# [*allow_versions*]
+#   (optional) Enable/Disable object versioning feature
+#   Defaults to 'false'.
+#
+# [*replicator_concurrency*]
+#   (optional) Number of replicator workers to spawn.
+#   Defaults to $::processorcount.
+#
+# [*updater_concurrency*]
+#   (optional) Number of updater workers to spawn.
+#   Defaults to $::processorcount.
+#
+# [*reaper_concurrency*]
+#   (optional) Number of reaper workers to spawn.
+#   Defaults to $::processorcount.
+#
+# [*log_facility*]
+#   (optional) Syslog log facility.
+#   Defaults to 'LOG_LOCAL2'.
+#
+# [*log_level*]
+#   (optional) Logging level.
+#   Defaults to 'INFO'.
+#
+# [*log_address*]
+#   Deprecated, this parameter does nothing.
+#
+# [*log_name*]
+#   (optional) Label used when logging.
+#   Defaults to "${type}-server".
+
+# [*log_udp_host*]
+#   (optional) If not set, the UDP receiver for syslog is disabled.
+#   Defaults to undef.
+#
+# [*log_udp_port*]
+#   (optional) Port value for UDP receiver, if enabled.
+#   Defaults to undef.
+#
+# [*config_file_path*]
+#   (optional) The configuration file name.
+#   Defaults to "${type}-server/${name}.conf".
 #
 define swift::storage::server(
   $type,

manifests/storage/xfs.pp

@@ -1,8 +1,21 @@
-# [*title*]
 #
-# [*byte_size*] Byte size to use for every inode in the created filesystem.
-#  It is recommened to use 1024 to ensure that the metadata can fit in a single inode.
+# === Parameters:
 #
+# [*device*]
+#   (mandatory) An array of devices (prefixed or not by /dev)
+#
+# [*mnt_base_dir*]
+#   (optional) The directory where the flat files that store the file system
+#   to be loop back mounted are actually mounted at.
+#   Defaults to '/srv/node', base directory where disks are mounted to
+#
+# [*byte_size*]
+#   (optional) Byte size to use for every inode in the created filesystem.
+#   Defaults to '1024'. It is recommened to use 1024 to ensure that the metadata can fit in a single inode.
+#
+# [*loopback*]
+#   (optional) Define if the device must be mounted as a loopback or not
+#   Defaults to false.
 #
 # Sample usage:
 #