92d0fbeafd
Add the "--enable-port-security" and "--disable-port-security" options to the "network create" and "network set" commands. This supports setting the default port security for ports created on a network. Change-Id: I1deb505bd77cef2e4bc3c2dbbb0c450665136f47 Implements: blueprint neutron-client
6.4 KiB
network
A network is an isolated Layer 2 networking segment. There are two types of networks, project and provider networks. Project networks are fully isolated and are not shared with other projects. Provider networks map to existing physical networks in the data center and provide external network access for servers and other resources. Only an OpenStack administrator can create provider networks. Networks can be connected via routers.
Compute v2, Network v2
network create
Create new network
network create
os network create
[--project <project> [--project-domain <project-domain>]]
[--enable | --disable]
[--share | --no-share]
[--availability-zone-hint <availability-zone>]
[--enable-port-security | --disable-port-security]
[--external [--default | --no-default] | --internal]
[--provider-network-type <provider-network-type>]
[--provider-physical-network <provider-physical-network>]
[--provider-segment <provider-segment>]
[--transparent-vlan | --no-transparent-vlan]
<name>--project <project>
Owner's project (name or ID)
Network version 2 only
--project-domain <project-domain>
Domain the project belongs to (name or ID). This can be used in case collisions between project names exist.
Network version 2 only
--enable
Enable network (default)
Network version 2 only
--disable
Disable network
Network version 2 only
--share
Share the network between projects
--no-share
Do not share the network between projects
--availability-zone-hint <availability-zone>
Availability Zone in which to create this network (Network Availability Zone extension required, repeat option to set multiple availability zones)
Network version 2 only
--enable-port-security
Enable port security by default for ports created on this network (default)
Network version 2 only
--disable-port-security
Disable port security by default for ports created on this network
Network version 2 only
--subnet <subnet>
IPv4 subnet for fixed IPs (in CIDR notation)
Compute version 2 only
--external
Set this network as an external network (external-net extension required)
Network version 2 only
--internal
Set this network as an internal network (default)
Network version 2 only
--default
Specify if this network should be used as the default external network
Network version 2 only
--no-default
Do not use the network as the default external network (default)
Network version 2 only
--provider-network-type <provider-network-type>
The physical mechanism by which the virtual network is implemented. The supported options are: flat, geneve, gre, local, vlan, vxlan.
Network version 2 only
--provider-physical-network <provider-physical-network>
Name of the physical network over which the virtual network is implemented
Network version 2 only
--provider-segment <provider-segment>
VLAN ID for VLAN networks or Tunnel ID for GENEVE/GRE/VXLAN networks
Network version 2 only
--transparent-vlan
Make the network VLAN transparent
Network version 2 only
--no-transparent-vlan
Do not make the network VLAN transparent
Network version 2 only
New network name
network delete
Delete network(s)
network delete
os network delete
<network> [<network> ...]
Network(s) to delete (name or ID)network list
List networks
network list
os network list
[--external]
[--long]--external
List external networks
--long
List additional fields in output
network set
Set network properties
Network version 2 only
network set
os network set
[--name <name>]
[--enable | --disable]
[--share | --no-share]
[--enable-port-security | --disable-port-security]
[--external [--default | --no-default] | --internal]
[--provider-network-type <provider-network-type>]
[--provider-physical-network <provider-physical-network>]
[--provider-segment <provider-segment>]
[--transparent-vlan | --no-transparent-vlan]
<network>--name <name>
Set network name
--enable
Enable network
--disable
Disable network
--share
Share the network between projects
--no-share
Do not share the network between projects
--enable-port-security
Enable port security by default for ports created on this network
--disable-port-security
Disable port security by default for ports created on this network
--external
Set this network as an external network. (external-net extension required)
--internal
Set this network as an internal network
--default
Set the network as the default external network
--no-default
Do not use the network as the default external network.
--provider-network-type <provider-network-type>
The physical mechanism by which the virtual network is implemented. The supported options are: flat, gre, local, vlan, vxlan.
--provider-physical-network <provider-physical-network>
Name of the physical network over which the virtual network is implemented
--provider-segment <provider-segment>
VLAN ID for VLAN networks or Tunnel ID for GRE/VXLAN networks
--transparent-vlan
Make the network VLAN transparent
--no-transparent-vlan
Do not make the network VLAN transparent
Network to modify (name or ID)
network show
Display network details
network show
os network show
<network>
Network to display (name or ID)