32c627eaf0
There are lots of "this option can be repeated" comments in the doc, which are not consistent to other similar docs. This patch changes them to the following format: "repeat option to do something" Change-Id: I54e01053091c428bf87bb36bb95f73a0b80ab6e7
4.0 KiB
port
Network v2
port create
Create new port
port create
os port create
--network <network>
[--fixed-ip subnet=<subnet>,ip-address=<ip-address>]
[--device <device-id>]
[--device-owner <device-owner>]
[--vnic-type <vnic-type>]
[--binding-profile <binding-profile>]
[--host <host-id>]
[--enable | --disable]
[--mac-address <mac-address>]
[--project <project> [--project-domain <project-domain>]]
<name>--network <network>
Network this port belongs to (name or ID)
--fixed-ip subnet=<subnet>,ip-address=<ip-address>
Desired IP and/or subnet (name or ID) for this port: subnet=<subnet>,ip-address=<ip-address> (repeat option to set multiple fixed IP addresses)
--device <device-id>
Port device ID
--device-owner <device-owner>
Device owner of this port
--vnic-type <vnic-type>
VNIC type for this port (direct | direct-physical | macvtap | normal | baremetal). If unspecified during port creation, default value will be 'normal'.
--binding-profile <binding-profile>
Custom data to be passed as binding:profile: <key>=<value> (repeat option to set multiple binding:profile data)
--host <host-id>
Allocate port on host <host-id> (ID only)
--enable
Enable port (default)
--disable
Disable port
--mac-address <mac-address>
MAC address of this port
--project <project>
Owner's project (name or ID)
--project-domain <project-domain>
Domain the project belongs to (name or ID). This can be used in case collisions between project names exist.
Name of this port
port delete
Delete port(s)
port delete
os port delete
<port> [<port> ...]
Port(s) to delete (name or ID)port list
List ports
port list
os port list
[--router <router>]--router <router>
List only ports attached to this router (name or ID)
port set
Set port properties
port set
os port set
[--fixed-ip subnet=<subnet>,ip-address=<ip-address> | --no-fixed-ip]
[--device <device-id>]
[--device-owner <device-owner>]
[--vnic-type <vnic-type>]
[--binding-profile <binding-profile> | --no-binding-profile]
[--host <host-id>]
[--enable | --disable]
[--name <name>]
<port>--fixed-ip subnet=<subnet>,ip-address=<ip-address>
Desired IP and/or subnet (name or ID) for this port: subnet=<subnet>,ip-address=<ip-address> (repeat option to set multiple fixed IP addresses)
--no-fixed-ip
Clear existing information of fixed-ips
--device <device-id>
Port device ID
--device-owner <device-owner>
Device owner of this port
--vnic-type <vnic-type>
VNIC type for this port (direct | direct-physical | macvtap | normal | baremetal). If unspecified during port creation, default value will be 'normal'.
--binding-profile <binding-profile>
Custom data to be passed as binding:profile: <key>=<value> (repeat option to set multiple binding:profile data)
--no-binding-profile
Clear existing information of binding:profile
--host <host-id>
Allocate port on host <host-id> (ID only)
--enable
Enable port
--disable
Disable port
--name
Set port name
Port to modify (name or ID)
port show
Display port details
port show
os port show
<port>
Port to display (name or ID)